Prosíme přihlašte se nebo zaregistrujte.

Přihlašte se svým uživatelským jménem a heslem.
Vaše pomoc je stále potřeba!

Autor Téma: monitor a ubuntu  (Přečteno 3353 krát)

oraf

  • Aktivní člen
  • *
  • Příspěvků: 203
monitor a ubuntu
« kdy: 29 Března 2013, 12:29:47 »
zdravim ,
konecne jsem zase rozjel ubuntu ale ke spokojenosti mi trosku zlobi, kdyz pripojim jakykoliv monitor a dam rozsireni plochy tak nejde zmenit ze ktere srtrany ten monitor je jakmile to zmenim okamzite se zasekne cele PC, a u druheho monitoru mi jeste k tomu nejde aninastavit vyssi rozliseni nez 1024x768, je tam grafika intel hd3000
« Poslední změna: 29 Března 2013, 12:39:52 od oraf »

beer

  • Host
Re:monitor a ubuntu
« Odpověď #1 kdy: 29 Března 2013, 12:50:09 »
Jaké podporuje maximální rozlišení? Třeba už na to  nemá, aby tam pustil větší... Na hlavním monitoru máš jaké rozlišení?

oraf

  • Aktivní člen
  • *
  • Příspěvků: 203
Re:monitor a ubuntu
« Odpověď #2 kdy: 29 Března 2013, 13:33:48 »
nejspis to podporuje vyssi rozliseni ve vindows to jde i na 1280x1024 px,
a na hlavnim monitoru mam 1366x768

ntz_reloaded

  • Lokaj
  • Závislák
  • ***
  • Příspěvků: 3735
  • skill :: ur home erly
Re:monitor a ubuntu
« Odpověď #3 kdy: 29 Března 2013, 14:44:45 »
zkus prosim pouzit aplikaci "arandr" .. je fantasticka
tikejte mi, taky Vam tikam ...
song of the day - openSUSE, openindiana, DuckDuckGo
The noise ain't noise anymore, who's to blame, WHO'S TO BLAME ??

oraf

  • Aktivní člen
  • *
  • Příspěvků: 203
Re:monitor a ubuntu
« Odpověď #4 kdy: 30 Března 2013, 11:02:13 »
bohuzel i prez ten arandr to zamrzne , sekne se komp a pomuze jen HW reset, dokonce se mi ted zbalznil takze zakladni rozliseni moniutoru u notebooku je misto 1366x768 pouze 640x480

oraf

  • Aktivní člen
  • *
  • Příspěvků: 203
Re:monitor a ubuntu
« Odpověď #5 kdy: 01 Dubna 2013, 18:47:19 »
nemate nekdo tuseni co s tim?

ntz_reloaded

  • Lokaj
  • Závislák
  • ***
  • Příspěvků: 3735
  • skill :: ur home erly
Re:monitor a ubuntu
« Odpověď #6 kdy: 02 Dubna 2013, 01:56:13 »
ukaz prosim /var/log/Xorg.0.log
tikejte mi, taky Vam tikam ...
song of the day - openSUSE, openindiana, DuckDuckGo
The noise ain't noise anymore, who's to blame, WHO'S TO BLAME ??

oraf

  • Aktivní člen
  • *
  • Příspěvků: 203
Re:monitor a ubuntu
« Odpověď #7 kdy: 02 Dubna 2013, 10:53:18 »
tady je vypis:
Kód: [Vybrat]
[    23.691]
X.Org X Server 1.11.3
Release Date: 2011-12-16
[    23.691] X Protocol Version 11, Revision 0
[    23.691] Build Operating System: Linux 2.6.24-29-server x86_64 Ubuntu
[    23.691] Current Operating System: Linux ondra-Ideapad-Z570 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64
[    23.691] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-23-generic root=UUID=0139d199-2b44-4271-a012-df541919e2db ro
[    23.691] Build Date: 05 April 2012  04:32:37AM
[    23.691] xorg-server 2:1.11.4-0ubuntu10 (For technical support please see http://www.ubuntu.com/support)
[    23.691] Current version of pixman: 0.24.4
[    23.691] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[    23.691] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    23.691] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr  2 12:50:46 2013
[    23.691] (==) Using config file: "/etc/X11/xorg.conf"
[    23.691] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    23.714] (==) ServerLayout "Layout0"
[    23.714] (**) |-->Screen "Screen0" (0)
[    23.714] (**) |   |-->Monitor "Monitor0"
[    23.714] (**) |   |-->Device "Device0"
[    23.714] (**) |-->Input Device "Keyboard0"
[    23.714] (**) |-->Input Device "Mouse0"
[    23.714] (==) Automatically adding devices
[    23.714] (==) Automatically enabling devices
[    23.714] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    23.714] Entry deleted from font path.
[    23.714] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    23.714] Entry deleted from font path.
[    23.714] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    23.714] Entry deleted from font path.
[    23.714] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    23.714] Entry deleted from font path.
[    23.714] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    23.714] Entry deleted from font path.
[    23.714] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    23.714] Entry deleted from font path.
[    23.714] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[    23.714] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    23.714] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    23.714] (WW) Disabling Keyboard0
[    23.714] (WW) Disabling Mouse0
[    23.714] (II) Loader magic: 0x7f8db674db00
[    23.714] (II) Module ABI versions:
[    23.714] X.Org ANSI C Emulation: 0.4
[    23.714] X.Org Video Driver: 11.0
[    23.714] X.Org XInput driver : 16.0
[    23.714] X.Org Server Extension : 6.0
[    23.715] (--) PCI:*(0:0:2:0) 8086:0116:17aa:397d rev 9, Mem @ 0xf1400000/4194304, 0xe0000000/268435456, I/O @ 0x00004000/64
[    23.715] (--) PCI: (0:1:0:0) 10de:0df4:17aa:397d rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[    23.715] (II) Open ACPI successful (/var/run/acpid.socket)
[    23.715] (II) LoadModule: "extmod"
[    23.715] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    23.715] (II) Module extmod: vendor="X.Org Foundation"
[    23.715] compiled for 1.11.3, module version = 1.0.0
[    23.715] Module class: X.Org Server Extension
[    23.715] ABI class: X.Org Server Extension, version 6.0
[    23.715] (II) Loading extension MIT-SCREEN-SAVER
[    23.715] (II) Loading extension XFree86-VidModeExtension
[    23.715] (II) Loading extension XFree86-DGA
[    23.715] (II) Loading extension DPMS
[    23.715] (II) Loading extension XVideo
[    23.715] (II) Loading extension XVideo-MotionCompensation
[    23.715] (II) Loading extension X-Resource
[    23.715] (II) LoadModule: "dbe"
[    23.715] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    23.715] (II) Module dbe: vendor="X.Org Foundation"
[    23.715] compiled for 1.11.3, module version = 1.0.0
[    23.715] Module class: X.Org Server Extension
[    23.715] ABI class: X.Org Server Extension, version 6.0
[    23.715] (II) Loading extension DOUBLE-BUFFER
[    23.715] (II) LoadModule: "glx"
[    23.716] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    23.733] (II) Module glx: vendor="X.Org Foundation"
[    23.733] compiled for 1.11.3, module version = 1.0.0
[    23.733] ABI class: X.Org Server Extension, version 6.0
[    23.733] (==) AIGLX enabled
[    23.733] (II) Loading extension GLX
[    23.734] (II) LoadModule: "record"
[    23.734] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    23.734] (II) Module record: vendor="X.Org Foundation"
[    23.734] compiled for 1.11.3, module version = 1.13.0
[    23.734] Module class: X.Org Server Extension
[    23.734] ABI class: X.Org Server Extension, version 6.0
[    23.734] (II) Loading extension RECORD
[    23.734] (II) LoadModule: "dri"
[    23.734] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    23.734] (II) Module dri: vendor="X.Org Foundation"
[    23.734] compiled for 1.11.3, module version = 1.0.0
[    23.734] ABI class: X.Org Server Extension, version 6.0
[    23.734] (II) Loading extension XFree86-DRI
[    23.734] (II) LoadModule: "dri2"
[    23.735] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    23.735] (II) Module dri2: vendor="X.Org Foundation"
[    23.735] compiled for 1.11.3, module version = 1.2.0
[    23.735] ABI class: X.Org Server Extension, version 6.0
[    23.735] (II) Loading extension DRI2
[    23.735] (II) LoadModule: "nvidia"
[    23.735] (WW) Warning, couldn't open module nvidia
[    23.735] (II) UnloadModule: "nvidia"
[    23.735] (II) Unloading nvidia
[    23.735] (EE) Failed to load module "nvidia" (module does not exist, 0)
[    23.735] (==) Matched intel as autoconfigured driver 0
[    23.735] (==) Matched vesa as autoconfigured driver 1
[    23.735] (==) Matched fbdev as autoconfigured driver 2
[    23.735] (==) Assigned the driver to the xf86ConfigLayout
[    23.735] (II) LoadModule: "intel"
[    23.735] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    23.736] (II) Module intel: vendor="X.Org Foundation"
[    23.736] compiled for 1.11.3, module version = 2.20.0
[    23.736] Module class: X.Org Video Driver
[    23.736] ABI class: X.Org Video Driver, version 11.0
[    23.736] (II) LoadModule: "vesa"
[    23.736] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    23.736] (II) Module vesa: vendor="X.Org Foundation"
[    23.736] compiled for 1.11.3, module version = 2.3.0
[    23.736] Module class: X.Org Video Driver
[    23.736] ABI class: X.Org Video Driver, version 11.0
[    23.736] (II) LoadModule: "fbdev"
[    23.736] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    23.736] (II) Module fbdev: vendor="X.Org Foundation"
[    23.736] compiled for 1.11.3, module version = 0.4.2
[    23.736] ABI class: X.Org Video Driver, version 11.0
[    23.736] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2)
[    23.736] (II) VESA: driver for VESA chipsets: vesa
[    23.736] (II) FBDEV: driver for framebuffer: fbdev
[    23.736] (++) using VT number 7

[    23.737] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    23.737] (WW) Falling back to old probe method for vesa
[    23.737] (WW) Falling back to old probe method for fbdev
[    23.737] (II) Loading sub module "fbdevhw"
[    23.737] (II) LoadModule: "fbdevhw"
[    23.737] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    23.738] (II) Module fbdevhw: vendor="X.Org Foundation"
[    23.738] compiled for 1.11.3, module version = 0.0.2
[    23.738] ABI class: X.Org Video Driver, version 11.0
[    23.738] drmOpenDevice: node name is /dev/dri/card0
[    23.738] drmOpenDevice: open result is 9, (OK)
[    23.738] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    23.738] drmOpenDevice: node name is /dev/dri/card0
[    23.738] drmOpenDevice: open result is 9, (OK)
[    23.738] drmOpenByBusid: drmOpenMinor returns 9
[    23.738] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    23.738] (**) intel(0): Depth 24, (--) framebuffer bpp 32
[    23.738] (==) intel(0): RGB weight 888
[    23.738] (==) intel(0): Default visual is TrueColor
[    23.738] (II) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2)
[    23.738] (--) intel(0): Chipset: "Sandybridge Mobile (GT2)"
[    23.738] (**) intel(0): Relaxed fencing enabled
[    23.738] (**) intel(0): Wait on SwapBuffers? enabled
[    23.738] (**) intel(0): Triple buffering? enabled
[    23.738] (**) intel(0): Framebuffer tiled
[    23.738] (**) intel(0): Pixmaps tiled
[    23.738] (**) intel(0): 3D buffers tiled
[    23.738] (**) intel(0): SwapBuffers wait enabled
[    23.738] (==) intel(0): video overlay key set to 0x101fe
[    23.738] (II) intel(0): Output LVDS1 using monitor section Monitor0
[    23.738] (II) intel(0): found backlight control interface /sys/class/backlight/intel_backlight
[    23.738] (II) intel(0): Output VGA1 has no monitor section
[    23.739] (II) intel(0): Output HDMI1 has no monitor section
[    23.792] (II) intel(0): Output DP1 has no monitor section
[    23.792] (II) intel(0): EDID for output LVDS1
[    23.792] (II) intel(0): Manufacturer: LGD  Model: 2dc  Serial#: 0
[    23.792] (II) intel(0): Year: 2010  Week: 0
[    23.792] (II) intel(0): EDID Version: 1.3
[    23.792] (II) intel(0): Digital Display Input
[    23.792] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    23.792] (II) intel(0): Gamma: 2.20
[    23.792] (II) intel(0): No DPMS capabilities specified
[    23.792] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    23.792] (II) intel(0): First detailed timing is preferred mode
[    23.792] (II) intel(0): redX: 0.613 redY: 0.371   greenX: 0.350 greenY: 0.606
[    23.792] (II) intel(0): blueX: 0.152 blueY: 0.099   whiteX: 0.313 whiteY: 0.329
[    23.792] (II) intel(0): Manufacturer's mask: 0
[    23.792] (II) intel(0): Supported detailed timing:
[    23.792] (II) intel(0): clock: 70.0 MHz   Image Size:  344 x 194 mm
[    23.792] (II) intel(0): h_active: 1366  h_sync: 1402  h_sync_end 1450 h_blank_end 1492 h_border: 0
[    23.792] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 782 v_border: 0
[    23.792] (II) intel(0):  LG Display
[    23.792] (II) intel(0):  LP156WH4-TLA1
[    23.792] (II) intel(0): EDID (in hex):
[    23.792] (II) intel(0): 00ffffffffffff0030e4dc0200000000
[    23.792] (II) intel(0): 00140103802213780a09159d5f599b27
[    23.792] (II) intel(0): 19505400000001010101010101010101
[    23.792] (II) intel(0): 010101010101581b567e50000e302430
[    23.792] (II) intel(0): 350058c2100000190000000000000000
[    23.792] (II) intel(0): 00000000000000000000000000fe004c
[    23.792] (II) intel(0): 4720446973706c61790a2020000000fe
[    23.792] (II) intel(0): 004c503135365748342d544c41310009
[    23.792] (II) intel(0): EDID vendor "LGD", prod id 732
[    23.792] (II) intel(0): Printing DDC gathered Modelines:
[    23.792] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz)
[    23.792] (II) intel(0): Not using mode "1366x768" (hsync out of range)
[    23.792] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    23.792] (II) intel(0): Not using default mode "800x600" (hsync out of range)
[    23.792] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    23.792] (II) intel(0): Not using default mode "800x600" (hsync out of range)
[    23.792] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    23.792] (II) intel(0): Not using default mode "1024x768" (hsync out of range)
[    23.792] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    23.792] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    23.792] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    23.792] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    23.792] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    23.792] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    23.792] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    23.792] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    23.792] (II) intel(0): Not using default mode "1360x768" (hsync out of range)
[    23.792] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    23.792] (II) intel(0): Not using default mode "1360x768" (hsync out of range)
[    23.792] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    23.792] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    23.792] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[    23.792] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[    23.792] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    23.792] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    23.792] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[    23.792] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[    23.792] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    23.792] (II) intel(0): Printing probed modes for output LVDS1
[    23.792] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    23.792] (II) intel(0): EDID for output VGA1
[    23.793] (II) intel(0): EDID for output HDMI1
[    23.848] (II) intel(0): EDID for output DP1
[    23.848] (II) intel(0): Output LVDS1 connected
[    23.848] (II) intel(0): Output VGA1 disconnected
[    23.848] (II) intel(0): Output HDMI1 disconnected
[    23.848] (II) intel(0): Output DP1 disconnected
[    23.848] (II) intel(0): Using fuzzy aspect match for initial modes
[    23.848] (II) intel(0): Output LVDS1 using initial mode 640x480
[    23.848] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    23.848] (II) intel(0): Kernel page flipping support detected, enabling
[    23.848] (**) intel(0): Display dimensions: (340, 190) mm
[    23.848] (**) intel(0): DPI set to (47, 64)
[    23.848] (II) Loading sub module "fb"
[    23.848] (II) LoadModule: "fb"
[    23.848] (II) Loading /usr/lib/xorg/modules/libfb.so
[    23.848] (II) Module fb: vendor="X.Org Foundation"
[    23.848] compiled for 1.11.3, module version = 1.0.0
[    23.848] ABI class: X.Org ANSI C Emulation, version 0.4
[    23.848] (II) Loading sub module "dri2"
[    23.848] (II) LoadModule: "dri2"
[    23.848] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    23.848] (II) Module dri2: vendor="X.Org Foundation"
[    23.848] compiled for 1.11.3, module version = 1.2.0
[    23.848] ABI class: X.Org Server Extension, version 6.0
[    23.848] (II) UnloadModule: "vesa"
[    23.848] (II) Unloading vesa
[    23.848] (II) UnloadModule: "fbdev"
[    23.848] (II) Unloading fbdev
[    23.848] (II) UnloadModule: "fbdevhw"
[    23.848] (II) Unloading fbdevhw
[    23.848] (==) Depth 24 pixmap format is 32 bpp
[    23.848] (II) intel(0): [DRI2] Setup complete
[    23.848] (II) intel(0): [DRI2]   DRI driver: i965
[    23.848] (II) intel(0): Allocated new frame buffer 640x480 stride 2560, tiled
[    23.849] (II) UXA(0): Driver registered support for the following operations:
[    23.849] (II)         solid
[    23.849] (II)         copy
[    23.849] (II)         composite (RENDER acceleration)
[    23.849] (II)         put_image
[    23.849] (II)         get_image
[    23.849] (==) intel(0): Backing store disabled
[    23.849] (==) intel(0): Silken mouse enabled
[    23.849] (II) intel(0): Initializing HW Cursor
[    23.849] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    23.849] (**) intel(0): DPMS enabled
[    23.849] (==) intel(0): Intel XvMC decoder enabled
[    23.849] (II) intel(0): Set up textured video
[    23.849] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    23.849] (II) intel(0): direct rendering: DRI2 Enabled
[    23.849] (==) intel(0): hotplug detection: "enabled"
[    24.154] (--) RandR disabled
[    24.154] (II) Initializing built-in extension Generic Event Extension
[    24.154] (II) Initializing built-in extension SHAPE
[    24.154] (II) Initializing built-in extension MIT-SHM
[    24.154] (II) Initializing built-in extension XInputExtension
[    24.154] (II) Initializing built-in extension XTEST
[    24.154] (II) Initializing built-in extension BIG-REQUESTS
[    24.154] (II) Initializing built-in extension SYNC
[    24.154] (II) Initializing built-in extension XKEYBOARD
[    24.154] (II) Initializing built-in extension XC-MISC
[    24.154] (II) Initializing built-in extension SECURITY
[    24.154] (II) Initializing built-in extension XINERAMA
[    24.154] (II) Initializing built-in extension XFIXES
[    24.154] (II) Initializing built-in extension RENDER
[    24.154] (II) Initializing built-in extension RANDR
[    24.154] (II) Initializing built-in extension COMPOSITE
[    24.154] (II) Initializing built-in extension DAMAGE
[    24.312] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    24.312] (II) AIGLX: enabled GLX_INTEL_swap_event
[    24.312] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    24.312] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    24.312] (II) AIGLX: Loaded and initialized i965
[    24.312] (II) GLX: Initialized DRI2 GL provider for screen 0
[    24.312] (II) intel(0): Setting screen physical size to 169 x 127
[    24.317] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    24.318] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    24.318] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    24.318] (II) LoadModule: "evdev"
[    24.318] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    24.319] (II) Module evdev: vendor="X.Org Foundation"
[    24.319] compiled for 1.11.3, module version = 2.7.0
[    24.319] Module class: X.Org XInput Driver
[    24.319] ABI class: X.Org XInput driver, version 16.0
[    24.319] (II) Using input driver 'evdev' for 'Power Button'
[    24.319] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    24.319] (**) Power Button: always reports core events
[    24.319] (**) evdev: Power Button: Device: "/dev/input/event2"
[    24.319] (--) evdev: Power Button: Vendor 0 Product 0x1
[    24.319] (--) evdev: Power Button: Found keys
[    24.319] (II) evdev: Power Button: Configuring as keyboard
[    24.319] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    24.319] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    24.319] (**) Option "xkb_rules" "evdev"
[    24.319] (**) Option "xkb_model" "pc105"
[    24.319] (**) Option "xkb_layout" "cz"
[    24.320] (II) XKB: reuse xkmfile /var/lib/xkb/server-583B992BBA3776030BA62AC94FC7F0AE9B04119F.xkm
[    24.320] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[    24.320] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    24.320] (II) Using input driver 'evdev' for 'Video Bus'
[    24.320] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    24.320] (**) Video Bus: always reports core events
[    24.320] (**) evdev: Video Bus: Device: "/dev/input/event11"
[    24.321] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    24.321] (--) evdev: Video Bus: Found keys
[    24.321] (II) evdev: Video Bus: Configuring as keyboard
[    24.321] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input11/event11"
[    24.321] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    24.321] (**) Option "xkb_rules" "evdev"
[    24.321] (**) Option "xkb_model" "pc105"
[    24.321] (**) Option "xkb_layout" "cz"
[    24.321] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[    24.321] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    24.321] (II) Using input driver 'evdev' for 'Video Bus'
[    24.321] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    24.321] (**) Video Bus: always reports core events
[    24.321] (**) evdev: Video Bus: Device: "/dev/input/event10"
[    24.321] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    24.321] (--) evdev: Video Bus: Found keys
[    24.321] (II) evdev: Video Bus: Configuring as keyboard
[    24.321] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:35/LNXVIDEO:00/input/input10/event10"
[    24.321] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    24.321] (**) Option "xkb_rules" "evdev"
[    24.321] (**) Option "xkb_model" "pc105"
[    24.321] (**) Option "xkb_layout" "cz"
[    24.321] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    24.321] (II) No input driver specified, ignoring this device.
[    24.321] (II) This device may have been added with another device file.
[    24.321] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    24.321] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    24.321] (II) Using input driver 'evdev' for 'Sleep Button'
[    24.321] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    24.321] (**) Sleep Button: always reports core events
[    24.321] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[    24.322] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    24.322] (--) evdev: Sleep Button: Found keys
[    24.322] (II) evdev: Sleep Button: Configuring as keyboard
[    24.322] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[    24.322] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    24.322] (**) Option "xkb_rules" "evdev"
[    24.322] (**) Option "xkb_model" "pc105"
[    24.322] (**) Option "xkb_layout" "cz"
[    24.322] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.0 (/dev/input/event4)
[    24.322] (**) Microsoft Microsoft® Nano Transceiver v2.0: Applying InputClass "evdev keyboard catchall"
[    24.322] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Nano Transceiver v2.0'
[    24.322] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    24.322] (**) Microsoft Microsoft® Nano Transceiver v2.0: always reports core events
[    24.322] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Device: "/dev/input/event4"
[    24.322] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Vendor 0x45e Product 0x745
[    24.322] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found keys
[    24.322] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Configuring as keyboard
[    24.322] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input4/event4"
[    24.322] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Nano Transceiver v2.0" (type: KEYBOARD, id 10)
[    24.322] (**) Option "xkb_rules" "evdev"
[    24.322] (**) Option "xkb_model" "pc105"
[    24.322] (**) Option "xkb_layout" "cz"
[    24.322] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.0 (/dev/input/event5)
[    24.322] (**) Microsoft Microsoft® Nano Transceiver v2.0: Applying InputClass "evdev pointer catchall"
[    24.322] (**) Microsoft Microsoft® Nano Transceiver v2.0: Applying InputClass "evdev keyboard catchall"
[    24.322] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Nano Transceiver v2.0'
[    24.322] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    24.322] (**) Microsoft Microsoft® Nano Transceiver v2.0: always reports core events
[    24.322] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Device: "/dev/input/event5"
[    24.323] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Vendor 0x45e Product 0x745
[    24.323] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found 9 mouse buttons
[    24.323] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found scroll wheel(s)
[    24.323] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found relative axes
[    24.323] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found x and y relative axes
[    24.323] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found absolute axes
[    24.323] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Forcing absolute x/y axes to exist.
[    24.323] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found keys
[    24.323] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Configuring as mouse
[    24.323] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Configuring as keyboard
[    24.323] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Adding scrollwheel support
[    24.323] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.0: YAxisMapping: buttons 4 and 5
[    24.323] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    24.323] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.1/input/input5/event5"
[    24.323] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Nano Transceiver v2.0" (type: KEYBOARD, id 11)
[    24.323] (**) Option "xkb_rules" "evdev"
[    24.323] (**) Option "xkb_model" "pc105"
[    24.323] (**) Option "xkb_layout" "cz"
[    24.323] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: initialized for relative axes.
[    24.323] (WW) evdev: Microsoft Microsoft® Nano Transceiver v2.0: ignoring absolute axes.
[    24.323] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) keeping acceleration scheme 1
[    24.323] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration profile 0
[    24.323] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration factor: 2.000
[    24.323] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration threshold: 4
[    24.323] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.0 (/dev/input/mouse0)
[    24.323] (II) No input driver specified, ignoring this device.
[    24.323] (II) This device may have been added with another device file.
[    24.323] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.0 (/dev/input/event6)
[    24.323] (**) Microsoft Microsoft® Nano Transceiver v2.0: Applying InputClass "evdev keyboard catchall"
[    24.323] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Nano Transceiver v2.0'
[    24.323] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    24.323] (**) Microsoft Microsoft® Nano Transceiver v2.0: always reports core events
[    24.323] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Device: "/dev/input/event6"
[    24.323] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Vendor 0x45e Product 0x745
[    24.323] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found 1 mouse buttons
[    24.323] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found scroll wheel(s)
[    24.323] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found relative axes
[    24.323] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found absolute axes
[    24.323] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found absolute multitouch axes
[    24.323] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found x and y absolute axes
[    24.323] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found keys
[    24.323] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Configuring as mouse
[    24.323] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Configuring as keyboard
[    24.323] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Adding scrollwheel support
[    24.323] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.0: YAxisMapping: buttons 4 and 5
[    24.323] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    24.323] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.2/input/input6/event6"
[    24.324] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Nano Transceiver v2.0" (type: KEYBOARD, id 12)
[    24.324] (**) Option "xkb_rules" "evdev"
[    24.324] (**) Option "xkb_model" "pc105"
[    24.324] (**) Option "xkb_layout" "cz"
[    24.324] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: initialized for relative axes.
[    24.324] (WW) evdev: Microsoft Microsoft® Nano Transceiver v2.0: ignoring absolute axes.
[    24.324] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) keeping acceleration scheme 1
[    24.324] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration profile 0
[    24.324] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration factor: 2.000
[    24.324] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration threshold: 4
[    24.324] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.0 (/dev/input/js0)
[    24.324] (II) No input driver specified, ignoring this device.
[    24.324] (II) This device may have been added with another device file.
[    24.324] (II) config/udev: Adding input device Lenovo easy camera (/dev/input/event8)
[    24.324] (**) Lenovo easy camera: Applying InputClass "evdev keyboard catchall"
[    24.324] (II) Using input driver 'evdev' for 'Lenovo easy camera'
[    24.324] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    24.324] (**) Lenovo easy camera: always reports core events
[    24.324] (**) evdev: Lenovo easy camera: Device: "/dev/input/event8"
[    24.324] (--) evdev: Lenovo easy camera: Vendor 0xbda Product 0x58ea
[    24.324] (--) evdev: Lenovo easy camera: Found keys
[    24.324] (II) evdev: Lenovo easy camera: Configuring as keyboard
[    24.324] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input8/event8"
[    24.324] (II) XINPUT: Adding extended input device "Lenovo easy camera" (type: KEYBOARD, id 13)
[    24.324] (**) Option "xkb_rules" "evdev"
[    24.324] (**) Option "xkb_model" "pc105"
[    24.324] (**) Option "xkb_layout" "cz"
[    24.325] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    24.325] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    24.325] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    24.325] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    24.325] (**) AT Translated Set 2 keyboard: always reports core events
[    24.325] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[    24.325] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    24.325] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    24.325] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    24.325] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    24.325] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[    24.325] (**) Option "xkb_rules" "evdev"
[    24.325] (**) Option "xkb_model" "pc105"
[    24.325] (**) Option "xkb_layout" "cz"
[    24.325] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[    24.325] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    24.325] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    24.325] (II) LoadModule: "synaptics"
[    24.325] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    24.325] (II) Module synaptics: vendor="X.Org Foundation"
[    24.325] compiled for 1.11.3, module version = 1.5.99
[    24.325] Module class: X.Org XInput Driver
[    24.326] ABI class: X.Org XInput driver, version 16.0
[    24.326] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    24.326] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    24.326] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    24.326] (**) Option "Device" "/dev/input/event9"
[    24.432] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[    24.432] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5728
[    24.432] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4902
[    24.432] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    24.432] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    24.432] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    24.432] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    24.432] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    24.432] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    24.488] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
[    24.488] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
[    24.488] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    24.488] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    24.488] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
[    24.488] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    24.488] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    24.488] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    24.488] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    24.488] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    24.488] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[    24.488] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    24.488] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event7)
[    24.488] (**) Ideapad extra buttons: Applying InputClass "evdev keyboard catchall"
[    24.488] (II) Using input driver 'evdev' for 'Ideapad extra buttons'
[    24.488] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    24.488] (**) Ideapad extra buttons: always reports core events
[    24.488] (**) evdev: Ideapad extra buttons: Device: "/dev/input/event7"
[    24.488] (--) evdev: Ideapad extra buttons: Vendor 0 Product 0
[    24.488] (--) evdev: Ideapad extra buttons: Found keys
[    24.488] (II) evdev: Ideapad extra buttons: Configuring as keyboard
[    24.488] (**) Option "config_info" "udev:/sys/devices/platform/ideapad/input/input7/event7"
[    24.488] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 16)
[    24.488] (**) Option "xkb_rules" "evdev"
[    24.488] (**) Option "xkb_model" "pc105"
[    24.488] (**) Option "xkb_layout" "cz"
[    24.492] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event16)
[    24.492] (II) No input driver specified, ignoring this device.
[    24.492] (II) This device may have been added with another device file.
[    24.492] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event17)
[    24.492] (II) No input driver specified, ignoring this device.
[    24.492] (II) This device may have been added with another device file.
[    24.493] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event18)
[    24.493] (II) No input driver specified, ignoring this device.
[    24.493] (II) This device may have been added with another device file.
[    24.493] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event15)
[    24.493] (II) No input driver specified, ignoring this device.
[    24.493] (II) This device may have been added with another device file.
[    24.493] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[    24.493] (II) No input driver specified, ignoring this device.
[    24.493] (II) This device may have been added with another device file.
[    24.493] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event13)
[    24.493] (II) No input driver specified, ignoring this device.
[    24.493] (II) This device may have been added with another device file.
[    24.493] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event14)
[    24.493] (II) No input driver specified, ignoring this device.
[    24.493] (II) This device may have been added with another device file.
[    25.256] (II) intel(0): EDID vendor "LGD", prod id 732
[    25.256] (II) intel(0): Printing DDC gathered Modelines:
[    25.256] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz)
[    26.267] (II) intel(0): EDID vendor "LGD", prod id 732
[    26.267] (II) intel(0): Printing DDC gathered Modelines:
[    26.267] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz)
[    27.677] (II) intel(0): EDID vendor "LGD", prod id 732
[    27.677] (II) intel(0): Printing DDC gathered Modelines:
[    27.677] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz)
[    46.260] (II) intel(0): EDID vendor "LGD", prod id 732
[    46.260] (II) intel(0): Printing DDC gathered Modelines:
[    46.260] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz)

RRRadek Neužil

  • Člen občanského sdružení Ubuntu ČR a placené komunitní podpory
  • Administrátor fóra
  • Závislák
  • ******
  • Příspěvků: 4672
Re:monitor a ubuntu
« Odpověď #8 kdy: 02 Dubna 2013, 10:58:40 »
Co je to přesně za počítač? Podle výpisu tuším nějaké Lenovo, nemá to náhodou ještě jednu grafiku Nvidia?
PS: omluvte moji češtinu není to moje silná stránka, snažím se hlavně vystihnou podstatu problému. ;)

oraf

  • Aktivní člen
  • *
  • Příspěvků: 203
Re:monitor a ubuntu
« Odpověď #9 kdy: 02 Dubna 2013, 11:09:19 »
presne tak je to lenovo Z570  a ma to tu Nvidia optimus
ale na nvidi jsem ani neinstlaoval driver
« Poslední změna: 02 Dubna 2013, 11:14:52 od oraf »

RRRadek Neužil

  • Člen občanského sdružení Ubuntu ČR a placené komunitní podpory
  • Administrátor fóra
  • Závislák
  • ******
  • Příspěvků: 4672
Re:monitor a ubuntu
« Odpověď #10 kdy: 02 Dubna 2013, 11:23:38 »
Aha tak to jsi nám zapomněl zdělit... Doinstaluj ovladače a zkus to pak viz...
Kód: [Vybrat]
sudo add-apt-repository ppa:bumblebee/stable -y

sudo add-apt-repository ppa:ubuntu-x-swat/x-updates -y

sudo apt-get update

sudo apt-get install linux-headers-$(uname -r) -y

sudo apt-get install bumblebee bumblebee-nvidia -y

sudo apt-get install -f -y

Postupně zadávej do terminálu a v případě nějakého erroru zastav a pošli nám to sem ;)
PS: omluvte moji češtinu není to moje silná stránka, snažím se hlavně vystihnou podstatu problému. ;)

oraf

  • Aktivní člen
  • *
  • Příspěvků: 203
Re:monitor a ubuntu
« Odpověď #11 kdy: 02 Dubna 2013, 11:28:47 »
u prikazu: sudo apt-get update

vypis.
Kód: [Vybrat]
W: Chyba GPG: https://download.01.org Ubuntu InRelease: Následující podpisy nemohly být ověřeny, protože není dostupný veřejný klíč: NO_PUBKEY A902DDA375E52366
W: Selhalo stažení cdrom://Ubuntu 12.04 LTS _Precise Pangolin_ - Release amd64 (20120425)/dists/precise/main/binary-i386/Packages  Pro přidání CD do APTu použijte apt-cdrom. apt-get update nelze využít pro přidávání nových CD.

W: Selhalo stažení cdrom://Ubuntu 12.04 LTS _Precise Pangolin_ - Release amd64 (20120425)/dists/precise/restricted/binary-i386/Packages  Pro přidání CD do APTu použijte apt-cdrom. apt-get update nelze využít pro přidávání nových CD.

W: Selhalo stažení cdrom://Ubuntu 12.04 LTS _Precise Pangolin_ - Release amd64 (20120425)/dists/precise/main/binary-amd64/Packages  Pro přidání CD do APTu použijte apt-cdrom. apt-get update nelze využít pro přidávání nových CD.

W: Selhalo stažení cdrom://Ubuntu 12.04 LTS _Precise Pangolin_ - Release amd64 (20120425)/dists/precise/restricted/binary-amd64/Packages  Pro přidání CD do APTu použijte apt-cdrom. apt-get update nelze využít pro přidávání nových CD.

E: Některé indexové soubory se nepodařilo stáhnout. Jsou ignorovány, nebo jsou použity starší verze.

Tadeáš Pařík

  • Předseda občanského sdružení Ubuntu ČR a člen placené komunitní podpory
  • Příspěvků: 6543
    • Ubuntu.cz
Re:monitor a ubuntu
« Odpověď #12 kdy: 02 Dubna 2013, 11:29:46 »
Ve zdrojích softwaru si odeber CD ROM a povol si standardní repa.
Do života je třeba mít připravený rozum, nebo provaz.

Ubuntu 14.04 64 bit / Windows 10 Pro - Intel DH87MC, Intel Core i7-4771, 8GB Ram, Kingston HyperX 3K SSD 120GB, Intel HD 4600 a ASUS GTX660-DC2OCPH-2GD5
Ubuntu 14.04 64bit - HP ProBook 4525s
Ubuntu 14.10 32bit - ThinkPad R52 (testování)

pariktadeas@jabbim.cz

oraf

  • Aktivní člen
  • *
  • Příspěvků: 203
Re:monitor a ubuntu
« Odpověď #13 kdy: 02 Dubna 2013, 11:33:12 »
pri bumblebee:
Kód: [Vybrat]
Potřebuji stáhnout 91,4 MB/91,5 MB archivů.
Po této operaci bude na disku použito dalších 231 MB.
VAROVÁNÍ: Následující balíky nemohou být autentizovány!
  libllvm3.1
E: Vyskytly se problémy a -y bylo použito bez --force-yes

oraf

  • Aktivní člen
  • *
  • Příspěvků: 203
Re:monitor a ubuntu
« Odpověď #14 kdy: 03 Dubna 2013, 12:57:06 »
nevi nekdo co jeste zkusit?
zkousle jsem instalovat i ovladac od intelu na 01.org ale bez vysledku ted ani nejde isntlaca pustit

Tadeáš Pařík

  • Předseda občanského sdružení Ubuntu ČR a člen placené komunitní podpory
  • Příspěvků: 6543
    • Ubuntu.cz
Re:monitor a ubuntu
« Odpověď #15 kdy: 03 Dubna 2013, 13:00:58 »
Psalo ti to řešení, prostě k tomu poslednímu příkazu dodej ten parametr

Kód: [Vybrat]
--force-yes
Do života je třeba mít připravený rozum, nebo provaz.

Ubuntu 14.04 64 bit / Windows 10 Pro - Intel DH87MC, Intel Core i7-4771, 8GB Ram, Kingston HyperX 3K SSD 120GB, Intel HD 4600 a ASUS GTX660-DC2OCPH-2GD5
Ubuntu 14.04 64bit - HP ProBook 4525s
Ubuntu 14.10 32bit - ThinkPad R52 (testování)

pariktadeas@jabbim.cz

oraf

  • Aktivní člen
  • *
  • Příspěvků: 203
Re:monitor a ubuntu
« Odpověď #16 kdy: 03 Dubna 2013, 13:21:24 »
diky nejak jsem si nevsiml ,
nicmene mi to v zaveru vypsalo zase nejakou chybku :
Kód: [Vybrat]
Při zpracování nastaly chyby:
 /var/cache/apt/archives/libllvm3.1_3.1-2ubuntu1~precise6.2_i386.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)

oraf

  • Aktivní člen
  • *
  • Příspěvků: 203
Re:monitor a ubuntu
« Odpověď #17 kdy: 03 Dubna 2013, 14:01:35 »
zajimave je ze kdyz pustim system v tom recovery modu , a dam spsutit bezne sezeni tak ma rozliseni 800x600

oraf

  • Aktivní člen
  • *
  • Příspěvků: 203
Re:monitor a ubuntu
« Odpověď #18 kdy: 03 Dubna 2013, 14:13:55 »
rozsliseni na defaultnim notebookovem monitoru je vyreseno zmenil jsem
/etc/X11/xorg.conf
parametry
HorizSync 30.0 - 83.0
VertRefresh 56.0 - 75.0

jen externi monitor prez VGA ma stale pouze rozliseni 1024x768
kde ve win8 zobrazoval 1280x1024

 

Provoz zaštiťuje spolek OpenAlt.