Autor Téma: [Nvidia driver] After install - No unity nebo black screen s cursorem (Přečteno 6848 krát)

FlaWleZz · « **kdy:** 12 Října 2013, 18:59:04 »

Zdravím používám Ubuntu 13.04 x64, zkoušel jsem i podobné distribuce based on Ubuntu/Debian.
Linux Mint KDE & Cinnamon (13,14,15), Kubuntu apod.

Moje grafická karta je: NVIDIA GeForce GT635M 2GB a Intel(R) HD Graphics 4000
Hledal jsem na internetu a zkoušel hledat a nic a nic.

Potom jsem narazil na klasiku:

Citace

sudo apt-get install nvidia-current nvidia-settings

Po rebootu, nastalo zmizení Unity a na nějakych jiných distribucí black screen s cursorem.
Zkoušel jsem hledat i v nějakych Driver Manageru v distribuci a nebylo tam nic edakvátního.

Děkuju moc za rady.

Cuore · « **Odpověď #1 kdy:** 12 Října 2013, 19:41:50 »

tohle vlákno si četl?
http://forum.ubuntu.cz/index.php?topic=69239.0;topicseen

FlaWleZz · « **Odpověď #2 kdy:** 12 Října 2013, 20:25:32 »

Nepomohlo.

pacholik · « **Odpověď #3 kdy:** 12 Října 2013, 20:45:18 »

No a Ctrl+Alt+F1 a startx? /var/log/Xorg.0.log?

FlaWleZz · « **Odpověď #4 kdy:** 12 Října 2013, 20:53:19 »

Citace: pacholik 12 Října 2013, 20:45:18

No a Ctrl+Alt+F1 a startx? /var/log/Xorg.0.log?

Jde to použít, akorád se neprovede žádná změna a ani po rebootu.
Stále black screen s cursorem.

Cuore · « **Odpověď #5 kdy:** 12 Října 2013, 22:07:09 »

a co ten log? dej sem jeh obsah, může tam být důvod havárie

Citace

/var/log/Xorg.0.log

FlaWleZz · « **Odpověď #6 kdy:** 12 Října 2013, 22:26:51 »

access denied
zkoušel jsem
sudo -s
ale nic

Cuore · « **Odpověď #7 kdy:** 13 Října 2013, 09:39:37 »

ale kuš

log je textový dokument, tak ho otevři

Kód: [Vybrat]

gedit /var/log/Xorg.0.log a obsah dej sem

Rover623 · « **Odpověď #8 kdy:** 13 Října 2013, 10:13:41 »

Jen pro zajímavost, po instalaci toho ovladače, vygeneroval jsi si konfiguraci X

Kód: [Vybrat]

sudo nvidia-xconfig

FlaWleZz · « **Odpověď #9 kdy:** 13 Října 2013, 11:33:02 »

Citace

gedit /var/log/Xorg.0.log

GTK-Warningg **: cannot open display

Citace

sudo nvidia-config

zkoušel jsem po instalaci, a myslim že tam bylo
nvidia-config: command not found

Jsem ochoten to Ubuntu klidně zase přeinstalovat, ale potřebuju 100% funkční tutorial jak správně nainstalovat NVIDIA grafiku když mam i Integrovanou, tudíž mam dual graphic cards. A je určítě jasné, že ovladač na tu mojí grafiku je už k dispozici i pro linux?

pepops · « **Odpověď #10 kdy:** 13 Října 2013, 11:59:08 »

toto by aj mna zaujimalo mam tu istu grafiku a tiez neviem ako na nu.

FlaWleZz · « **Odpověď #11 kdy:** 13 Října 2013, 12:04:09 »

https://www.google.cz/?gws_rd=cr&ei=0G9aUoOgBtHJswafk4DYAg#q=NVIDIA+GeForce+GT635M+linux+driver
Pár možností zde je ke stahnutí třeba .tar.gz ovladače na tu grafiku, ale to my také nešlo.
Kdyby někdo na něco přišel, prosím pomoc.
Chci opravdu používat Linux (nejlépe based on Ubuntu) a nechci buglé komerční Wokna.

Na starém stolním PC, sem měl vždy uspěsně nainstalovany NVIDIA ovladač a bez problému.
Takže to je asi opravdu problém stim, že neexistuje zatím ovladač pro linux na tuto grafickou kartu.

No tadytom notasu, nemam ani nic v Driver Manageru ke stahnutí.
Zatímco na stolním PC tam vždy bylo.

Cuore · « **Odpověď #12 kdy:** 13 Října 2013, 12:47:09 »

na ten log použij tedy nano nebo cat atd.

Kód: [Vybrat]

nano /var/log/Xorg.0.log

Kód: [Vybrat]

cat /var/log/Xorg.0.lognebo jen otevři cestu a log Xorg.0.log si najdi a otevři klikací cestou

Kód: [Vybrat]

nautilus /var/log

patapon · « **Odpověď #13 kdy:** 13 Října 2013, 12:48:31 »

mozte vyskusat nasledovne--->
jedna sa o dve varianty.
prepnut sa do negrafickeho rezimu (ctrl+alt+F1)

Kód: [Vybrat]

1.
sudo apt-get remove --purge xserver-xorg
sudo apt-get install xserver-xorg
sudo dpkg-reconfigure xserver-xorg
2.
sudo apt-get purge nvidia-current
sudo apt-get install nvidia-current
sudo reboot

mne osobne to vzdy pomohlo.

FlaWleZz · « **Odpověď #14 kdy:** 13 Října 2013, 19:51:29 »

Citace: patapon 13 Října 2013, 12:48:31

mozte vyskusat nasledovne--->
jedna sa o dve varianty.
prepnut sa do negrafickeho rezimu (ctrl+alt+F1)
Kód: [Vybrat]
1. sudo apt-get remove --purge xserver-xorg sudo apt-get install xserver-xorg sudo dpkg-reconfigure xserver-xorg 2. sudo apt-get purge nvidia-current sudo apt-get install nvidia-current sudo reboot
mne osobne to vzdy pomohlo.

Nepomohlo ani jedno. Doufám že mnou nepohrdáte. O linux se zajímám už asi 5 měsíců a jinak se věnuji programovaní C#,PHP,SQL.
Takže opravdu nejsem nováček na informační technologii.
Jediný co pomůže je reinstalace Ubuntu, ale po té co zase začnu se řidit podle jakékoliv tutorialu nainstalovaní NVIDIA ovladače, nastane stejný problém po rebootu. Takže si myslím, že tento hardware opravdu asi není zatím podporovany.
Takže do té doby budu používat asi Wokna, protože kdybych používal Linux a polovina hardware nefungovala. Tak to rovnou jsou vyhozený peníze za to, že nebudu používat ten hardware.

pacholik · « **Odpověď #15 kdy:** 13 Října 2013, 20:28:51 »

Tak už sem pošli ten log.

Cuore · « **Odpověď #16 kdy:** 13 Října 2013, 20:44:17 »

Citace

Doufám že mnou nepohrdáte

máš takový dojem? Pokud neposkytneš relevantní informace, tak nemůžeme pomoct.

FlaWleZz · « **Odpověď #17 kdy:** 13 Října 2013, 20:52:18 »

Citace

[ 16.966]
X.Org X Server 1.14.2.901 (1.14.3 RC 1)
Release Date: 2013-07-25
[ 16.966] X Protocol Version 11, Revision 0
[ 16.966] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu
[ 16.966] Current Operating System: Linux flawlezz-pc 3.11.0-8-generic #15-Ubuntu SMP Fri Sep 20 04:11:26 UTC 2013 x86_64
[ 16.966] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-8-generic root=UUID=2ff9d745-a4b1-4643-b6df-38ed9e37a390 ro quiet splash
[ 16.966] Build Date: 24 September 2013 06:09:26PM
[ 16.966] xorg-server 2:1.14.2.901-2ubuntu5 (For technical support please see http://www.ubuntu.com/support)
[ 16.966] Current version of pixman: 0.30.2
[ 16.966]    Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
[ 16.966] Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 16.966] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 13 20:43:42 2013
[ 16.986] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 16.987] (==) No Layout section. Using the first Screen section.
[ 16.987] (==) No screen section available. Using defaults.
[ 16.987] (**) |-->Screen "Default Screen Section" (0)
[ 16.987] (**) | |-->Monitor "<default monitor>"
[ 16.987] (==) No monitor specified for screen "Default Screen Section".
   Using a default monitor configuration.
[ 16.987] (==) Automatically adding devices
[ 16.987] (==) Automatically enabling devices
[ 16.987] (==) Automatically adding GPU devices
[ 16.987] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 16.987]    Entry deleted from font path.
[ 16.987] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 16.987]    Entry deleted from font path.
[ 16.987] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 16.987]    Entry deleted from font path.
[ 16.987] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 16.987]    Entry deleted from font path.
[ 16.987] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 16.987]    Entry deleted from font path.
[ 16.987] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 16.987]    Entry deleted from font path.
[ 16.987] (==) FontPath set to:
   /usr/share/fonts/X11/misc,
   /usr/share/fonts/X11/Type1,
   built-ins
[ 16.987] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 16.987] (II) The server relies on udev to provide the list of input devices.
   If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 16.987] (II) Loader magic: 0x7fad15488d20
[ 16.987] (II) Module ABI versions:
[ 16.987]    X.Org ANSI C Emulation: 0.4
[ 16.987]    X.Org Video Driver: 14.1
[ 16.987]    X.Org XInput driver : 19.1
[ 16.987]    X.Org Server Extension : 7.0
[ 16.987] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 16.988] (--) PCI:*(0:0:2:0) 8086:0166:17aa:3901 rev 9, Mem @ 0xd3400000/4194304, 0xe0000000/268435456, I/O @ 0x00004000/64
[ 16.988] (--) PCI: (0:1:0:0) 10de:0de3:17aa:3901 rev 161, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x??/524288
[ 16.989] (II) Open ACPI successful (/var/run/acpid.socket)
[ 16.989] Initializing built-in extension Generic Event Extension
[ 16.989] Initializing built-in extension SHAPE
[ 16.989] Initializing built-in extension MIT-SHM
[ 16.989] Initializing built-in extension XInputExtension
[ 16.989] Initializing built-in extension XTEST
[ 16.989] Initializing built-in extension BIG-REQUESTS
[ 16.989] Initializing built-in extension SYNC
[ 16.989] Initializing built-in extension XKEYBOARD
[ 16.989] Initializing built-in extension XC-MISC
[ 16.989] Initializing built-in extension SECURITY
[ 16.989] Initializing built-in extension XINERAMA
[ 16.989] Initializing built-in extension XFIXES
[ 16.989] Initializing built-in extension RENDER
[ 16.989] Initializing built-in extension RANDR
[ 16.989] Initializing built-in extension COMPOSITE
[ 16.989] Initializing built-in extension DAMAGE
[ 16.989] Initializing built-in extension MIT-SCREEN-SAVER
[ 16.989] Initializing built-in extension DOUBLE-BUFFER
[ 16.989] Initializing built-in extension RECORD
[ 16.989] Initializing built-in extension DPMS
[ 16.989] Initializing built-in extension X-Resource
[ 16.989] Initializing built-in extension XVideo
[ 16.989] Initializing built-in extension XVideo-MotionCompensation
[ 16.989] Initializing built-in extension SELinux
[ 16.989] Initializing built-in extension XFree86-VidModeExtension
[ 16.989] Initializing built-in extension XFree86-DGA
[ 16.989] Initializing built-in extension XFree86-DRI
[ 16.989] Initializing built-in extension DRI2
[ 16.989] (II) LoadModule: "glx"
[ 17.079] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[ 19.145] (II) Module glx: vendor="NVIDIA Corporation"
[ 19.145]    compiled for 4.0.2, module version = 1.0.0
[ 19.145]    Module class: X.Org Server Extension
[ 19.145] (II) NVIDIA GLX Module 304.88 Wed Mar 27 14:46:57 PDT 2013
[ 19.145] Loading extension GLX
[ 19.145] (==) Matched intel as autoconfigured driver 0
[ 19.145] (==) Matched intel as autoconfigured driver 1
[ 19.145] (==) Matched vesa as autoconfigured driver 2
[ 19.145] (==) Matched modesetting as autoconfigured driver 3
[ 19.145] (==) Matched fbdev as autoconfigured driver 4
[ 19.145] (==) Assigned the driver to the xf86ConfigLayout
[ 19.145] (II) LoadModule: "intel"
[ 19.146] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 19.158] (II) Module intel: vendor="X.Org Foundation"
[ 19.158]    compiled for 1.14.2.901, module version = 2.21.14
[ 19.158]    Module class: X.Org Video Driver
[ 19.158]    ABI class: X.Org Video Driver, version 14.1
[ 19.159] (II) LoadModule: "vesa"
[ 19.159] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 19.159] (II) Module vesa: vendor="X.Org Foundation"
[ 19.159]    compiled for 1.14.1, module version = 2.3.2
[ 19.159]    Module class: X.Org Video Driver
[ 19.159]    ABI class: X.Org Video Driver, version 14.1
[ 19.159] (II) LoadModule: "modesetting"
[ 19.159] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 19.159] (II) Module modesetting: vendor="X.Org Foundation"
[ 19.159]    compiled for 1.14.1, module version = 0.8.0
[ 19.159]    Module class: X.Org Video Driver
[ 19.159]    ABI class: X.Org Video Driver, version 14.1
[ 19.159] (II) LoadModule: "fbdev"
[ 19.159] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 19.159] (II) Module fbdev: vendor="X.Org Foundation"
[ 19.159]    compiled for 1.14.1, module version = 0.4.3
[ 19.159]    Module class: X.Org Video Driver
[ 19.159]    ABI class: X.Org Video Driver, version 14.1
[ 19.159] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
   i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
   915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
   Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
   GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
   HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
   HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
   HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
   HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 19.159] (II) VESA: driver for VESA chipsets: vesa
[ 19.159] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 19.159] (II) FBDEV: driver for framebuffer: fbdev
[ 19.159] (++) using VT number 7

[ 19.159] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.21.14-4ubuntu4 (Christopher James Halse Rogers <raof@ubuntu.com>)
[ 19.160] (WW) Falling back to old probe method for vesa
[ 19.160] (WW) Falling back to old probe method for modesetting
[ 19.160] (WW) Falling back to old probe method for fbdev
[ 19.160] (II) Loading sub module "fbdevhw"
[ 19.160] (II) LoadModule: "fbdevhw"
[ 19.176] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 19.176] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 19.176]    compiled for 1.14.2.901, module version = 0.0.2
[ 19.176]    ABI class: X.Org Video Driver, version 14.1
[ 19.176] (II) intel(0): Creating default Display subsection in Screen section
   "Default Screen Section" for depth/fbbpp 24/32
[ 19.177] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 19.177] (==) intel(0): RGB weight 888
[ 19.177] (==) intel(0): Default visual is TrueColor
[ 19.177] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[ 19.177] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 19.177] (**) intel(0): Framebuffer tiled
[ 19.177] (**) intel(0): Pixmaps tiled
[ 19.177] (**) intel(0): "Tear free" disabled
[ 19.177] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 19.177] (II) intel(0): Output LVDS1 has no monitor section
[ 19.177] (--) intel(0): found backlight control interface acpi_video1 (type 'firmware')
[ 19.177] (II) intel(0): Output VGA1 has no monitor section
[ 19.177] (II) intel(0): Output HDMI1 has no monitor section
[ 19.177] (II) intel(0): Output DP1 has no monitor section
[ 19.177] (--) intel(0): Output LVDS1 using initial mode 1600x900 on pipe 0
[ 19.177] (==) intel(0): DPI set to (96, 96)
[ 19.177] (II) Loading sub module "dri2"
[ 19.177] (II) LoadModule: "dri2"
[ 19.177] (II) Module "dri2" already built-in
[ 19.177] (II) UnloadModule: "vesa"
[ 19.177] (II) Unloading vesa
[ 19.177] (II) UnloadModule: "modesetting"
[ 19.177] (II) Unloading modesetting
[ 19.177] (II) UnloadModule: "fbdev"
[ 19.177] (II) Unloading fbdev
[ 19.177] (II) UnloadSubModule: "fbdevhw"
[ 19.177] (II) Unloading fbdevhw
[ 19.177] (==) Depth 24 pixmap format is 32 bpp
[ 19.177] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[ 19.177] (==) intel(0): Backing store disabled
[ 19.177] (==) intel(0): Silken mouse enabled
[ 19.177] (II) intel(0): HW Cursor enabled
[ 19.177] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 19.178] (==) intel(0): DPMS enabled
[ 19.178] (II) intel(0): [DRI2] Setup complete
[ 19.178] (II) intel(0): [DRI2] DRI driver: i965
[ 19.178] (II) intel(0): direct rendering: DRI2 Enabled
[ 19.178] (==) intel(0): hotplug detection: "enabled"
[ 19.178] (--) RandR disabled
[ 19.182] (II) SELinux: Disabled on system
[ 19.202] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[ 19.203] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using LVDS1, position (0, 0), rotation normal
[ 19.220] (II) intel(0): Setting screen physical size to 423 x 238
[ 19.224] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 19.244] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 19.244] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 19.244] (II) LoadModule: "evdev"
[ 19.245] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 19.262] (II) Module evdev: vendor="X.Org Foundation"
[ 19.262]    compiled for 1.14.1, module version = 2.7.3
[ 19.262]    Module class: X.Org XInput Driver
[ 19.262]    ABI class: X.Org XInput driver, version 19.1
[ 19.262] (II) Using input driver 'evdev' for 'Power Button'
[ 19.262] (**) Power Button: always reports core events
[ 19.262] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 19.262] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 19.262] (--) evdev: Power Button: Found keys
[ 19.262] (II) evdev: Power Button: Configuring as keyboard
[ 19.262] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 19.262] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 19.262] (**) Option "xkb_rules" "evdev"
[ 19.262] (**) Option "xkb_model" "pc105"
[ 19.262] (**) Option "xkb_layout" "cz"
[ 19.264] (II) XKB: reuse xkmfile /var/lib/xkb/server-583B992BBA3776030BA62AC94FC7F0AE9B04119F.xkm
[ 19.264] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 19.264] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 19.264] (II) Using input driver 'evdev' for 'Video Bus'
[ 19.264] (**) Video Bus: always reports core events
[ 19.264] (**) evdev: Video Bus: Device: "/dev/input/event9"
[ 19.264] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 19.264] (--) evdev: Video Bus: Found keys
[ 19.264] (II) evdev: Video Bus: Configuring as keyboard
[ 19.264] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9/event9"
[ 19.264] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 19.264] (**) Option "xkb_rules" "evdev"
[ 19.264] (**) Option "xkb_model" "pc105"
[ 19.264] (**) Option "xkb_layout" "cz"
[ 19.265] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 19.265] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 19.265] (II) Using input driver 'evdev' for 'Power Button'
[ 19.265] (**) Power Button: always reports core events
[ 19.265] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 19.265] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 19.265] (--) evdev: Power Button: Found keys
[ 19.265] (II) evdev: Power Button: Configuring as keyboard
[ 19.265] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input0/event0"
[ 19.265] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id
[ 19.265] (**) Option "xkb_rules" "evdev"
[ 19.265] (**) Option "xkb_model" "pc105"
[ 19.265] (**) Option "xkb_layout" "cz"
[ 19.265] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 19.265] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 19.265] (II) Using input driver 'evdev' for 'Sleep Button'
[ 19.265] (**) Sleep Button: always reports core events
[ 19.265] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 19.265] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 19.265] (--) evdev: Sleep Button: Found keys
[ 19.265] (II) evdev: Sleep Button: Configuring as keyboard
[ 19.265] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0E:00/input/input1/event1"
[ 19.265] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 19.265] (**) Option "xkb_rules" "evdev"
[ 19.265] (**) Option "xkb_model" "pc105"
[ 19.265] (**) Option "xkb_layout" "cz"
[ 19.265] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 19.265] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 19.265] (II) Using input driver 'evdev' for 'Video Bus'
[ 19.265] (**) Video Bus: always reports core events
[ 19.265] (**) evdev: Video Bus: Device: "/dev/input/event8"
[ 19.265] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 19.265] (--) evdev: Video Bus: Found keys
[ 19.265] (II) evdev: Video Bus: Configuring as keyboard
[ 19.265] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:36/LNXVIDEO:00/input/input8/event8"
[ 19.265] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 10)
[ 19.265] (**) Option "xkb_rules" "evdev"
[ 19.265] (**) Option "xkb_model" "pc105"
[ 19.265] (**) Option "xkb_layout" "cz"
[ 19.266] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 19.266] (II) No input driver specified, ignoring this device.
[ 19.266] (II) This device may have been added with another device file.
[ 19.266] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 19.266] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[ 19.266] (II) config/udev: Adding input device PIXART USB OPTICAL MOUSE (/dev/input/event5)
[ 19.266] (**) PIXART USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[ 19.266] (II) Using input driver 'evdev' for 'PIXART USB OPTICAL MOUSE'
[ 19.266] (**) PIXART USB OPTICAL MOUSE: always reports core events
[ 19.266] (**) evdev: PIXART USB OPTICAL MOUSE: Device: "/dev/input/event5"
[ 19.266] (--) evdev: PIXART USB OPTICAL MOUSE: Vendor 0x93a Product 0x2510
[ 19.266] (--) evdev: PIXART USB OPTICAL MOUSE: Found 3 mouse buttons
[ 19.266] (--) evdev: PIXART USB OPTICAL MOUSE: Found scroll wheel(s)
[ 19.266] (--) evdev: PIXART USB OPTICAL MOUSE: Found relative axes
[ 19.266] (--) evdev: PIXART USB OPTICAL MOUSE: Found x and y relative axes
[ 19.266] (II) evdev: PIXART USB OPTICAL MOUSE: Configuring as mouse
[ 19.266] (II) evdev: PIXART USB OPTICAL MOUSE: Adding scrollwheel support
[ 19.266] (**) evdev: PIXART USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[ 19.266] (**) evdev: PIXART USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 19.266] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input5/event5"
[ 19.266] (II) XINPUT: Adding extended input device "PIXART USB OPTICAL MOUSE" (type: MOUSE, id 11)
[ 19.266] (II) evdev: PIXART USB OPTICAL MOUSE: initialized for relative axes.
[ 19.266] (**) PIXART USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[ 19.266] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration profile 0
[ 19.266] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[ 19.266] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[ 19.266] (II) config/udev: Adding input device PIXART USB OPTICAL MOUSE (/dev/input/mouse0)
[ 19.266] (II) No input driver specified, ignoring this device.
[ 19.266] (II) This device may have been added with another device file.
[ 19.266] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[ 19.266] (II) No input driver specified, ignoring this device.
[ 19.266] (II) This device may have been added with another device file.
[ 19.267] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[ 19.267] (II) No input driver specified, ignoring this device.
[ 19.267] (II) This device may have been added with another device file.
[ 19.267] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
[ 19.267] (II) No input driver specified, ignoring this device.
[ 19.267] (II) This device may have been added with another device file.
[ 19.267] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event7)
[ 19.267] (**) Lenovo EasyCamera: Applying InputClass "evdev keyboard catchall"
[ 19.267] (II) Using input driver 'evdev' for 'Lenovo EasyCamera'
[ 19.267] (**) Lenovo EasyCamera: always reports core events
[ 19.267] (**) evdev: Lenovo EasyCamera: Device: "/dev/input/event7"
[ 19.267] (--) evdev: Lenovo EasyCamera: Vendor 0x5986 Product 0x295
[ 19.267] (--) evdev: Lenovo EasyCamera: Found keys
[ 19.267] (II) evdev: Lenovo EasyCamera: Configuring as keyboard
[ 19.267] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input7/event7"
[ 19.267] (II) XINPUT: Adding extended input device "Lenovo EasyCamera" (type: KEYBOARD, id 12)
[ 19.267] (**) Option "xkb_rules" "evdev"
[ 19.267] (**) Option "xkb_model" "pc105"
[ 19.267] (**) Option "xkb_layout" "cz"
[ 19.267] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 19.267] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 19.267] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 19.267] (**) AT Translated Set 2 keyboard: always reports core events
[ 19.267] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[ 19.267] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 19.267] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 19.267] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 19.267] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 19.267] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 19.267] (**) Option "xkb_rules" "evdev"
[ 19.267] (**) Option "xkb_model" "pc105"
[ 19.267] (**) Option "xkb_layout" "cz"
[ 19.268] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event13)
[ 19.268] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 19.268] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 19.268] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 19.268] (II) LoadModule: "synaptics"
[ 19.268] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 19.268] (II) Module synaptics: vendor="X.Org Foundation"
[ 19.268]    compiled for 1.14.2, module version = 1.7.1
[ 19.268]    Module class: X.Org XInput Driver
[ 19.268]    ABI class: X.Org XInput driver, version 19.1
[ 19.268] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 19.268] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 19.268] (**) Option "Device" "/dev/input/event13"
[ 19.288] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 19.288] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5728 (res 46)
[ 19.288] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4902 (res 83)
[ 19.288] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 19.288] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 19.288] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 19.288] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 19.288] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 19.288] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 19.300] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input13/event13"
[ 19.300] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[ 19.300] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 19.300] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 19.300] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.036
[ 19.300] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 19.300] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 19.300] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 19.300] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 19.300] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 19.300] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 19.300] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 19.300] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event6)
[ 19.300] (**) Ideapad extra buttons: Applying InputClass "evdev keyboard catchall"
[ 19.300] (II) Using input driver 'evdev' for 'Ideapad extra buttons'
[ 19.300] (**) Ideapad extra buttons: always reports core events
[ 19.300] (**) evdev: Ideapad extra buttons: Device: "/dev/input/event6"
[ 19.300] (--) evdev: Ideapad extra buttons: Vendor 0 Product 0
[ 19.300] (--) evdev: Ideapad extra buttons: Found keys
[ 19.300] (II) evdev: Ideapad extra buttons: Configuring as keyboard
[ 19.300] (**) Option "config_info" "udev:/sys/devices/platform/ideapad/input/input6/event6"
[ 19.300] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 15)
[ 19.300] (**) Option "xkb_rules" "evdev"
[ 19.301] (**) Option "xkb_model" "pc105"
[ 19.301] (**) Option "xkb_layout" "cz"
[ 21.307] (II) intel(0): EDID vendor "SEC", prod id 16982
[ 21.334] (II) intel(0): Printing DDC gathered Modelines:
[ 21.334] (II) intel(0): Modeline "1600x900"x0.0 107.80 1600 1648 1680 1932 900 902 907 930 -hsync -vsync (55.8 kHz eP)
[ 30.389] (II) XKB: reuse xkmfile /var/lib/xkb/server-583B992BBA3776030BA62AC94FC7F0AE9B04119F.xkm
[ 30.393] (II) XKB: reuse xkmfile /var/lib/xkb/server-583B992BBA3776030BA62AC94FC7F0AE9B04119F.xkm
[ 30.396] (II) XKB: reuse xkmfile /var/lib/xkb/server-583B992BBA3776030BA62AC94FC7F0AE9B04119F.xkm
[ 30.434] (II) XKB: reuse xkmfile /var/lib/xkb/server-A17A8B7E6A035B08AEF1458EC9F5EEBBE3604670.xkm
[ 30.437] (II) XKB: reuse xkmfile /var/lib/xkb/server-A17A8B7E6A035B08AEF1458EC9F5EEBBE3604670.xkm
[ 30.514] (II) XKB: reuse xkmfile /var/lib/xkb/server-A17A8B7E6A035B08AEF1458EC9F5EEBBE3604670.xkm
[ 31.372] (II) XKB: reuse xkmfile /var/lib/xkb/server-A17A8B7E6A035B08AEF1458EC9F5EEBBE3604670.xkm
[ 109.081] (II) config/udev: removing device PIXART USB OPTICAL MOUSE
[ 109.081] (II) evdev: PIXART USB OPTICAL MOUSE: Close
[ 109.081] (II) UnloadModule: "evdev"
[ 110.584] (II) config/udev: Adding input device PIXART USB OPTICAL MOUSE (/dev/input/mouse0)
[ 110.584] (II) No input driver specified, ignoring this device.
[ 110.584] (II) This device may have been added with another device file.
[ 110.585] (II) config/udev: Adding input device PIXART USB OPTICAL MOUSE (/dev/input/event5)
[ 110.585] (**) PIXART USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[ 110.585] (II) Using input driver 'evdev' for 'PIXART USB OPTICAL MOUSE'
[ 110.585] (**) PIXART USB OPTICAL MOUSE: always reports core events
[ 110.585] (**) evdev: PIXART USB OPTICAL MOUSE: Device: "/dev/input/event5"
[ 110.585] (--) evdev: PIXART USB OPTICAL MOUSE: Vendor 0x93a Product 0x2510
[ 110.585] (--) evdev: PIXART USB OPTICAL MOUSE: Found 3 mouse buttons
[ 110.585] (--) evdev: PIXART USB OPTICAL MOUSE: Found scroll wheel(s)
[ 110.585] (--) evdev: PIXART USB OPTICAL MOUSE: Found relative axes
[ 110.585] (--) evdev: PIXART USB OPTICAL MOUSE: Found x and y relative axes
[ 110.585] (II) evdev: PIXART USB OPTICAL MOUSE: Configuring as mouse
[ 110.585] (II) evdev: PIXART USB OPTICAL MOUSE: Adding scrollwheel support
[ 110.585] (**) evdev: PIXART USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[ 110.585] (**) evdev: PIXART USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 110.585] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input14/event5"
[ 110.585] (II) XINPUT: Adding extended input device "PIXART USB OPTICAL MOUSE" (type: MOUSE, id 11)
[ 110.586] (II) evdev: PIXART USB OPTICAL MOUSE: initialized for relative axes.
[ 110.586] (**) PIXART USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[ 110.586] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration profile 0
[ 110.586] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[ 110.586] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[ 119.518] (II) evdev: Ideapad extra buttons: Close
[ 119.518] (II) UnloadModule: "evdev"
[ 119.518] (II) UnloadModule: "synaptics"
[ 119.518] (II) evdev: AT Translated Set 2 keyboard: Close
[ 119.518] (II) UnloadModule: "evdev"
[ 119.518] (II) evdev: Lenovo EasyCamera: Close
[ 119.518] (II) UnloadModule: "evdev"
[ 119.518] (II) evdev: Video Bus: Close
[ 119.518] (II) UnloadModule: "evdev"
[ 119.518] (II) evdev: Sleep Button: Close
[ 119.518] (II) UnloadModule: "evdev"
[ 119.518] (II) evdev: Power Button: Close
[ 119.518] (II) UnloadModule: "evdev"
[ 119.518] (II) evdev: Video Bus: Close
[ 119.518] (II) UnloadModule: "evdev"
[ 119.518] (II) evdev: Power Button: Close
[ 119.518] (II) UnloadModule: "evdev"
[ 119.518] (II) evdev: PIXART USB OPTICAL MOUSE: Close
[ 119.564] (II) UnloadModule: "evdev"
[ 119.565] (EE) Server terminated successfully (0). Closing log file.

pacholik · « **Odpověď #18 kdy:** 13 Října 2013, 21:12:31 »

Vygeneroval bych si ten xorg.conf.

Kód: [Vybrat]

sudo nvidia-xconfig

FlaWleZz · « **Odpověď #19 kdy:** 13 Října 2013, 21:22:31 »

Citace: pacholik 13 Října 2013, 21:12:31

Vygeneroval bych si ten xorg.conf.
Kód: [Vybrat]
sudo nvidia-xconfig

WARNING: Unable to locate/open X conf file
New X conf file written to '/etc/X11/xorg.conf/'

Kód: [Vybrat]

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 304.88  (buildmeister@swio-display-x86-rhel47-06)  Wed Mar 27 15:32:58 PDT 2013

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Teď jsem si uvědomil že v Linux Mint 15 a Kubuntu 13.04 jsem žádné takové problemy neměl.
Jednoduše jsem dal Driver Manager a tam jsem dal stahnout/nainstalovat , reboot a už to šlo.
Tady v tom Driver Manageru nic nemam ke stahnutí.

Rover623 · « **Odpověď #20 kdy:** 13 Října 2013, 22:01:22 »

Nemá cenu se zabývat ovladačem nVidia (tím předvoleným), nějaké střevo pustilo do výchozího stavu nějaký update pro verzi 304.88 (předvolená). který na 12.04 způsobuje na velkém počtu karet nefunkčnost akcelerace (momentálně vím o 10 lidech kterým to přestalo chodit). Kdo má možnost, nechť instaluje experimentální ovladač 319, sice přestane fungovat plymouth, ale aspoň vám bude fungovat akcelerace.

Jinak musím opět konstatovat, jestli má být 12.04 verze LTS, proč se sakra skoro po každém updatu něco rozbije.

majakmp3 · « **Odpověď #21 kdy:** 27 Října 2013, 00:08:46 »

Citace: Rover623 13 Října 2013, 22:01:22

Nemá cenu se zabývat ovladačem nVidia (tím předvoleným), nějaké střevo pustilo do výchozího stavu nějaký update pro verzi 304.88 (předvolená). který na 12.04 způsobuje na velkém počtu karet nefunkčnost akcelerace (momentálně vím o 10 lidech kterým to přestalo chodit). Kdo má možnost, nechť instaluje experimentální ovladač 319, sice přestane fungovat plymouth, ale aspoň vám bude fungovat akcelerace.

Jinak musím opět konstatovat, jestli má být 12.04 verze LTS, proč se sakra skoro po každém updatu něco rozbije.

Tohle potvrzuji.
Původně jsem dle instrukcí na wiki rozchodil bumblebee s experimentálním ovladačem 310 a vše chodilo OK. Po opravdu dlouhé době jsem dnes na noťasovi spustil HL2: Episode One a nestačil se divit. Nejprve jsem zjistil, že hra jede na Intelu. Při hloubání nad tím, proč je tomu tak, jsem došel k zajímavým závěrům:

Současný uzavřený ovladač nVidia je verze 304.88
bumblebee-indicator zmizel nejenom ze seznamu aplikací, které se automaticky spouští po startu, ale on zmizel úplně ze systému
optirun glxspheres funguje OK
vblank_mode=0 primusrun glxspheres - je v háji, odkazuje se na ovladač 310, který se však v systému nenalézá

Kód: [Vybrat]

vblank_mode=0 primusrun glxspheres
primus: fatal: failed to load any of the libraries: /usr/lib/nvidia-experimental-310/libGL.so.1:/usr/lib32/nvidia-experimental-310/libGL.so.1
/usr/lib/nvidia-experimental-310/libGL.so.1: cannot open shared object file: No such file or directory
/usr/lib32/nvidia-experimental-310/libGL.so.1: cannot open shared object file: No such file or directory

Na to, že používám Xubuntu 12.04 LTS verzi, se mi tu občas dějí věci, že nad tím zůstává rozum stát.

Rover623 · « **Odpověď #22 kdy:** 27 Října 2013, 12:05:15 »

Tak fixnutý ovladač 304.88 je venku. Akcelerace už by měla fungovat normálně. Bohužel zůstal jeden bug, pokud se provede update ze staré verze, obvykle akcelerace po restartu zase selže. Chce to celý ovladač odstranit a povolit znovu.

sabraq · « **Odpověď #23 kdy:** 27 Října 2013, 19:00:59 »

K instalaci ovladače 319 jen krátce - 304.88 jsem měl nainstalovaný a dlužno říct, že pouhým odinstalováním/nainstalováním v synapticu jsem se dostal akorát tak ke konzolovému loginu po restartu. Vtip je v tom, že modul nvidie verze 304.88 zůstal v dkms i po odinstalování v apt. Problém je odhalitelný ve /var/log/kern.log na který odkazuje Xorg.0.log, kde si kernel stěžuje na neshodu ve verzích ovladače (kdysi mi to dělalo i s jinými experimentálními ovladači) a musí se sáhnout po ručním odstranění dkms modulu. Takže pokud by měl někdo předchozí verzi ovladače a instaloval jiný, např. z ppa, může se mu to stát.

Kód: [Vybrat]

sudo dkms status 

acx-mac80211, git, 3.5.0-42-generic, i686: installed
nvidia-319, 319.49, 3.5.0-42-generic, i686: installed

Nyní už je tam správně pouze jeden modul, předtím tam byl i 304.88. Tedy pokud bych potřeboval odstranit ten 319, provedu

Kód: [Vybrat]

sudo dkms remove nvidia-319/319.49 --all
Název modulu 304.88 byl tuším jenom nvidia, takže ten tvar by měl být sudo dkms remove nvidia/304.88 --all. Po odinstalování si můžete zkontrolovat dkms status a restartovat do grafiky.

pepops · « **Odpověď #24 kdy:** 05 Prosince 2013, 17:52:28 »

Citace: sabraq 27 Října 2013, 19:00:59

Kód: [Vybrat]
sudo dkms remove nvidia-319/319.49 --all
Název modulu 304.88 byl tuším jenom nvidia, takže ten tvar by měl být sudo dkms remove nvidia/304.88 --all. Po odinstalování si můžete zkontrolovat dkms status a restartovat do grafiky.

bohuzial nefunguje odinstaloval som nvidia-current
taktiez nvidia-304/304.88 --all
dkms neukazuje nič a napriek tomu je tam krížik a nič viac