Prosíme přihlašte se nebo zaregistrujte.

Přihlašte se svým uživatelským jménem a heslem.

Autor Téma: [Vyřešeno] MSI GE60 nefunguje bumblebee  (Přečteno 1482 krát)

marun

  • Stálý člen
  • ***
  • Příspěvků: 601
    • Zobrazit profil
[Vyřešeno] MSI GE60 nefunguje bumblebee
« kdy: 05 Prosinec 2013, 14:55:27 »
mám nový notebook msi ge60 2oe-244xcz má přepínatelnou grafiku intel/nvidia sle nemůžu na něm rozjet bumblebee
nainstaloval jsem bumblebee bumblebee-nvidia
restartoval jsem a glxspheres mi fuguje
ale optirun glxspheres ne napíše to

Kód: [Vybrat]
martin@martin-GE60-2OC-2OD-2OE:~$ optirun -vv glxspheres
[  538.680056] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[  538.680707] [INFO]Configured driver: nvidia
[  538.680983] [DEBUG]optirun version 3.2.1 starting...
[  538.681006] [DEBUG]Active configuration:
[  538.681015] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[  538.681024] [DEBUG] X display: :8
[  538.681032] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-304:/usr/lib32/nvidia-304
[  538.681041] [DEBUG] Socket path: /var/run/bumblebee.socket
[  538.681050] [DEBUG] Accel/display bridge: auto
[  538.681058] [DEBUG] VGL Compression: proxy
[  538.681067] [DEBUG] VGLrun extra options:
[  538.681076] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
[  538.681205] [DEBUG]Using auto-detected bridge virtualgl
[  539.775707] [INFO]Response: No - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0.  Please

[  539.775723] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0.  Please

[  539.775728] [DEBUG]Socket closed.
[  539.775740] [ERROR]Aborting because fallback start is disabled.
[  539.775745] [DEBUG]Killing all remaining processes.
martin@martin-GE60-2OC-2OD-2OE:~$
mám zatím ovladač nvidia-304

nastavení bumblebee
Kód: [Vybrat]
# Configuration file for Bumblebee. Values should **not** be put between quotes

## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d

## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false


# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
#         bbswitch - new in BB 3, recommended if available
#       switcheroo - vga_switcheroo method, use at your own risk
#             none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods

## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia_304
PMMethod=none
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-current:/usr/lib32/nvidia-current
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-current/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia

## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau

mám ubuntu 13.04

Kód: [Vybrat]
martin@martin-GE60-2OC-2OD-2OE:~$ uname -a
Linux martin-GE60-2OC-2OD-2OE 3.8.0-34-generic #49-Ubuntu SMP Tue Nov 12 18:00:10 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux

martin@martin-GE60-2OC-2OD-2OE:~$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 13.04
Release: 13.04
Codename: raring

hw:

Kód: [Vybrat]
martin@martin-GE60-2OC-2OD-2OE:~$ lspci
00:00.0 Host bridge: Intel Corporation Haswell DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Haswell PCI Express x16 Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation Haswell Integrated Graphics Controller (rev 06)
00:03.0 Audio device: Intel Corporation Haswell HD Audio Controller (rev 06)
00:14.0 USB controller: Intel Corporation Lynx Point USB xHCI Host Controller (rev 05)
00:16.0 Communication controller: Intel Corporation Lynx Point MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation Lynx Point High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port #1 (rev d5)
00:1c.3 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port #4 (rev d5)
00:1c.4 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port #5 (rev d5)
00:1c.5 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port #6 (rev d5)
00:1d.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation Lynx Point LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation Lynx Point 6-port SATA Controller 1 [AHCI mode] (rev 05)
00:1f.3 SMBus: Intel Corporation Lynx Point SMBus Controller (rev 05)
01:00.0 3D controller: NVIDIA Corporation GK106M [GeForce GTX 765M] (rev a1)
03:00.0 Ethernet controller: Qualcomm Atheros Killer E2200 Gigabit Ethernet Controller (rev 13)
04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5227 (rev 01)
05:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723AE PCIe Wireless Network Adapter

martin@martin-GE60-2OC-2OD-2OE:~$ lsmod
Module                  Size  Used by
nls_iso8859_1          12713  1
parport_pc             28152  0
ppdev                  17073  0
rfcomm                 32862  12
bnep                   18040  2
snd_hda_codec_realtek    78445  1
snd_hda_codec_hdmi     36855  1
joydev                 17377  0
rtsx_pci_ms            13011  0
arc4                   12615  2
memstick               16554  1 rtsx_pci_ms
coretemp               13355  0
kvm_intel             132891  0
kvm                   443165  1 kvm_intel
ghash_clmulni_intel    13259  0
aesni_intel            55399  1
aes_x86_64             17255  1 aesni_intel
xts                    12885  1 aesni_intel
lrw                    13257  1 aesni_intel
gf128mul               14951  2 lrw,xts
ablk_helper            13597  1 aesni_intel
cryptd                 20373  3 ghash_clmulni_intel,aesni_intel,ablk_helper
snd_hda_intel          39619  5
snd_hda_codec         136498  3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep              13602  1 snd_hda_codec
snd_pcm                97451  3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc         18710  2 snd_pcm,snd_hda_intel
snd_seq_midi           13324  0
snd_seq_midi_event     14899  1 snd_seq_midi
snd_rawmidi            30180  1 snd_seq_midi
lpc_ich                17061  0
snd_seq                61554  2 snd_seq_midi_event,snd_seq_midi
microcode              22881  0
snd_seq_device         14497  3 snd_seq,snd_rawmidi,snd_seq_midi
rtl8723ae             169248  0
rtl_pci                35460  1 rtl8723ae
rtlwifi                89981  2 rtl_pci,rtl8723ae
snd_timer              29425  2 snd_pcm,snd_seq
psmouse                95905  0
serio_raw              13215  0
mac80211              564385  3 rtl_pci,rtlwifi,rtl8723ae
cfg80211              557387  2 mac80211,rtlwifi
btusb                  22513  0
bluetooth             238357  22 bnep,btusb,rfcomm
i915                  600501  3
snd                    68876  20 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device
drm_kms_helper         49394  1 i915
mei                    41158  0
alx                    32173  0
mdio                   13807  1 alx
drm                   286028  4 i915,drm_kms_helper
compat                 15383  9 alx,bnep,cfg80211,btusb,mac80211,rtlwifi,rfcomm,bluetooth,rtl8723ae
i2c_algo_bit           13413  1 i915
soundcore              12680  1 snd
mxm_wmi                13021  0
video                  19390  1 i915
wmi                    19070  1 mxm_wmi
mac_hid                13205  0
lp                     17759  0
parport                46345  3 lp,ppdev,parport_pc
mmc_block              27090  2
hid_generic            12540  0
usbhid                 47074  0
hid                   101289  2 hid_generic,usbhid
rtsx_pci_sdmmc         17475  0
rtsx_pci               34351  2 rtsx_pci_ms,rtsx_pci_sdmmc
ahci                   25731  3
libahci                31364  1 ahci

a teď po startu mi to hodilo dokonce kernel panic viz příloha

ale po tom už to vyhazuje ty chybové hlášky


EDIT:

Vyřešeno

z
Kód: [Vybrat]
ppa:ubuntu-x-swat/x-updates jsem nainstaloval
Kód: [Vybrat]
nvidia-331a změnil všechny
Kód: [Vybrat]
nvidia-current na
Kód: [Vybrat]
nvidia-331 a krenel driver na
Kód: [Vybrat]
nvidia_331
Kód: [Vybrat]
# Configuration file for Bumblebee. Values should **not** be put between quotes

## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d

## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false


# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
#         bbswitch - new in BB 3, recommended if available
#       switcheroo - vga_switcheroo method, use at your own risk
#             none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods

## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia_331
PMMethod=none
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-331:/usr/lib32/nvidia-331
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-331/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia

## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau

po restartu
Kód: [Vybrat]
optirun glxspheres funguje

[příloha smazaná administrátorem]
« Poslední změna: 07 Prosinec 2013, 12:11:12 od marun »