Ubuntu nevidí druhý disk [vyřešeno]

[Majis007]

Zdravím.
vím, že toto téma tu bylo několikrát, ale nikde jsem nenašel řešení.
Na můj starý počítač jsem si nainstaloval Ubuntu vedle Windows XP. Problém je v tom, že přes Ubuntu nevidím můj druhý disk. Disk se nezobrazuje ani v sudo fdisk -l ani v GParted. Jedná se o disk  Western Digital Blue 320GB 8MB cache

Připojuji výpis sudo fdisk -l

Disk /dev/sda: 80.0 GB, 80026361856 bytes
hlav: 255, sektorů na stopu: 63, cylindrů: 9 729, celkem 156 301 488 sektorů
Jednotky = sektory po 1 * 512 = 512 bajtech
Velikost sektoru (logického/fyzického): 512 bajtů / 512 bajtů
Velikost I/O (minimální/optimální): 512 bajtů / 512 bajtů
Identifikátor disku: 0x1eb71eb6

Zařízení Zavádět   Začátek       Konec    Bloky    Id  Systém
/dev/sda1   *          63   117222304    58611121    7  HPFS/NTFS/exFAT
/dev/sda2       117223422   156301311    19538945    5  Rozšířený
/dev/sda5       117223424   154204159    18490368   83  Linux
/dev/sda6       154206208   156301311     1047552   82  Linux swap/Solaris

Díky za jakékoliv řešení

[Petr Merlin Vaněček]

Tak to je zajímavé.
Ten disk by měl být vidět tak jak tak.

Zkusil bych se mrknout na nastavení BIOSu.

Taky sem prosím dej výpis - vytvoří to v domovské složce soubor lshw.txt, ten sem prosím dej

Kód: [Vybrat]

sudo lshw > ~/lshw.txt


[Majis007]

Kód: [Vybrat]

home-pc
    description: Tower Computer
    product: System Name
    vendor: ATComputers
    version: System Version
    serial: DT073231
    width: 32 bits
    capabilities: smbios-2.3 dmi-2.3
    configuration: boot=normal chassis=tower uuid=C040720D-521B-D911-B8B8-A59B2F1A0C8E
  *-core
       description: Motherboard
       product: P4SP-MX
       vendor: ASUSTeK Computer INC.
       physical id: 0
       version: REV 1.xx
       serial: xxxxxxxxxxx
     *-firmware
          description: BIOS
          vendor: Award Software, Inc.
          physical id: 0
          version: ASUS P4SP-MX ACPI BIOS Revision 1004
          date: 09/01/2004
          size: 64KiB
          capacity: 192KiB
          capabilities: pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb agp
     *-cpu
          description: CPU
          product: Intel(R) Celeron(R) CPU 2.80GHz
          vendor: Intel Corp.
          physical id: 4
          bus info: cpu@0
          version: 15.3.3
          serial: 0000-0F33-0000-0000-0000-0000
          slot: PGA 478
          size: 2800MHz
          capacity: 3200MHz
          width: 32 bits
          clock: 133MHz
          capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe constant_tsc pebs bts pni dtes64 monitor ds_cpl cid
          configuration: id=0
        *-cache:0
             description: L1 cache
             physical id: 8
             slot: L1 Cache
             size: 8KiB
             capacity: 32KiB
             capabilities: pipeline-burst synchronous internal write-back data
        *-cache:1
             description: L2 cache
             physical id: 9
             slot: L2 Cache
             size: 256KiB
             capacity: 1MiB
             capabilities: pipeline-burst synchronous internal write-back data
     *-memory
          description: System Memory
          physical id: 25
          slot: System board or motherboard
          size: 1GiB
          capacity: 1GiB
        *-bank:0
             description: DIMM DRAM Synchronous
             physical id: 0
             slot: DIMM 1
             size: 512MiB
             width: 64 bits
        *-bank:1
             description: DIMM DRAM Synchronous
             physical id: 1
             slot: DIMM 2
             size: 512MiB
             width: 64 bits
     *-communication UNCLAIMED
          description: Communication controller
          product: V.92 56K WinModem
          vendor: LSI Corporation
          physical id: f
          bus info: pci@0000:00:0f.0
          version: 03
          width: 32 bits
          clock: 33MHz
          capabilities: pm bus_master cap_list
          configuration: latency=32 maxlatency=14 mingnt=252
          resources: memory:d5000000-d50000ff ioport:8400(size=8) ioport:8000(size=256)
     *-pci
          description: Host bridge
          product: 651 Host
          vendor: Silicon Integrated Systems [SiS]
          physical id: 100
          bus info: pci@0000:00:00.0
          version: 02
          width: 32 bits
          clock: 33MHz
          configuration: driver=agpgart-sis latency=32
          resources: irq:0 memory:d8000000-dbffffff
        *-pci
             description: PCI bridge
             product: AGP Port (virtual PCI-to-PCI bridge)
             vendor: Silicon Integrated Systems [SiS]
             physical id: 1
             bus info: pci@0000:00:01.0
             version: 00
             width: 32 bits
             clock: 33MHz
             capabilities: pci normal_decode bus_master
             resources: ioport:d000(size=4096) memory:d7800000-d7ffffff memory:dff00000-febfffff
           *-display
                description: VGA compatible controller
                product: RV620 LE [Radeon HD 3450 AGP]
                vendor: Advanced Micro Devices, Inc. [AMD/ATI]
                physical id: 0
                bus info: pci@0000:01:00.0
                version: 00
                width: 32 bits
                clock: 66MHz
                capabilities: pm agp agp-2.0 vga_controller bus_master cap_list rom
                configuration: driver=radeon latency=64 mingnt=8
                resources: irq:16 memory:e0000000-efffffff ioport:d800(size=256) memory:d7800000-d780ffff memory:dffe0000-dfffffff
        *-isa
             description: ISA bridge
             product: SiS962 [MuTIOL Media IO] LPC Controller
             vendor: Silicon Integrated Systems [SiS]
             physical id: 2
             bus info: pci@0000:00:02.0
             version: 25
             width: 32 bits
             clock: 33MHz
             capabilities: isa bus_master
             configuration: latency=0
        *-serial
             description: SMBus
             product: SiS961/2/3 SMBus controller
             vendor: Silicon Integrated Systems [SiS]
             physical id: 2.1
             bus info: pci@0000:00:02.1
             version: 00
             width: 32 bits
             clock: 33MHz
             configuration: driver=sis96x_smbus latency=0
             resources: irq:0 ioport:e600(size=32)
        *-ide
             description: IDE interface
             product: 5513 IDE Controller
             vendor: Silicon Integrated Systems [SiS]
             physical id: 2.5
             bus info: pci@0000:00:02.5
             version: 00
             width: 32 bits
             clock: 33MHz
             capabilities: ide bus_master
             configuration: driver=pata_sis latency=128
             resources: irq:16 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:a400(size=16)
        *-multimedia
             description: Multimedia audio controller
             product: SiS7012 AC'97 Sound Controller
             vendor: Silicon Integrated Systems [SiS]
             physical id: 2.7
             bus info: pci@0000:00:02.7
             version: a0
             width: 32 bits
             clock: 33MHz
             capabilities: pm bus_master cap_list
             configuration: driver=snd_intel8x0 latency=32 maxlatency=11 mingnt=52
             resources: irq:18 ioport:9400(size=256) ioport:9000(size=128)
        *-usb:0
             description: USB controller
             product: USB 1.1 Controller
             vendor: Silicon Integrated Systems [SiS]
             physical id: 3
             bus info: pci@0000:00:03.0
             version: 0f
             width: 32 bits
             clock: 33MHz
             capabilities: ohci bus_master
             configuration: driver=ohci-pci latency=32 maxlatency=80
             resources: irq:9 memory:d7000000-d7000fff
        *-usb:1
             description: USB controller
             product: USB 1.1 Controller
             vendor: Silicon Integrated Systems [SiS]
             physical id: 3.1
             bus info: pci@0000:00:03.1
             version: 0f
             width: 32 bits
             clock: 33MHz
             capabilities: ohci bus_master
             configuration: driver=ohci-pci latency=32 maxlatency=80
             resources: irq:21 memory:d6800000-d6800fff
        *-usb:2
             description: USB controller
             product: USB 2.0 Controller
             vendor: Silicon Integrated Systems [SiS]
             physical id: 3.3
             bus info: pci@0000:00:03.3
             version: 00
             width: 32 bits
             clock: 33MHz
             capabilities: pm ehci bus_master cap_list
             configuration: driver=ehci-pci latency=32 maxlatency=80
             resources: irq:23 memory:d6000000-d6000fff
        *-network
             description: Ethernet interface
             product: SiS900 PCI Fast Ethernet
             vendor: Silicon Integrated Systems [SiS]
             physical id: 4
             bus info: pci@0000:00:04.0
             logical name: eth0
             version: 91
             serial: 00:11:2f:ae:50:df
             size: 100Mbit/s
             capacity: 100Mbit/s
             width: 32 bits
             clock: 33MHz
             capabilities: pm bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
             configuration: autonegotiation=on broadcast=yes driver=sis900 driverversion=v1.08.10 Apr. 2 2006 duplex=full ip=192.168.0.11 latency=32 link=yes maxlatency=11 mingnt=52 multicast=yes port=MII speed=100Mbit/s
             resources: irq:19 ioport:8800(size=256) memory:d5800000-d5800fff memory:dfee0000-dfefffff
     *-scsi:0
          physical id: 1
          logical name: scsi0
          capabilities: emulated
        *-disk
             description: ATA Disk
             product: WDC WD800JB-00JJ
             vendor: Western Digital
             physical id: 0.0.0
             bus info: scsi@0:0.0.0
             logical name: /dev/sda
             version: 05.0
             serial: WD-WCAM93054174
             size: 74GiB (80GB)
             capabilities: partitioned partitioned:dos
             configuration: ansiversion=5 sectorsize=512 signature=1eb71eb6
           *-volume:0
                description: Windows NTFS volume
                physical id: 1
                bus info: scsi@0:0.0.0,1
                logical name: /dev/sda1
                version: 3.1
                serial: 54aa0ef4-d31e-664d-9c5e-ecf71f4fb4ef
                size: 55GiB
                capacity: 55GiB
                capabilities: primary bootable ntfs initialized
                configuration: clustersize=4096 created=2013-01-04 17:25:49 filesystem=ntfs modified_by_chkdsk=true mounted_on_nt4=true resize_log_file=true state=dirty upgrade_on_mount=true
           *-volume:1
                description: Extended partition
                physical id: 2
                bus info: scsi@0:0.0.0,2
                logical name: /dev/sda2
                size: 18GiB
                capacity: 18GiB
                capabilities: primary extended partitioned partitioned:extended
              *-logicalvolume:0
                   description: Linux filesystem partition
                   physical id: 5
                   logical name: /dev/sda5
                   logical name: /
                   capacity: 17GiB
                   configuration: mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered state=mounted
              *-logicalvolume:1
                   description: Linux swap / Solaris partition
                   physical id: 6
                   logical name: /dev/sda6
                   capacity: 1023MiB
                   capabilities: nofs
     *-scsi:1
          physical id: 2
          logical name: scsi1
          capabilities: emulated
        *-cdrom
             description: DVD writer
             product: DVD RW DW-D23A
             vendor: SONY
             physical id: 0.0.0
             bus info: scsi@1:0.0.0
             logical name: /dev/cdrom
             logical name: /dev/sr0
             version: CYS1
             capabilities: removable audio cd-r cd-rw dvd dvd-r
             configuration: ansiversion=5 status=nodisc


[Petr Merlin Vaněček]

Kam je ten disk připojený?
Podle toho výpisu jej systém vůbec nevidí.

[sabraq]

No já bych řekl, že by měl být jako první disk na scsi0, dle bus info... Co syslog?

[Majis007]

Oba disky jsou zapojeny přes jeden UATA kabel (každej má vlastní sběrnici)

Kód: [Vybrat]

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.11.0-12-generic (buildd@komainu) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu7) ) #19-Ubuntu SMP Wed Oct 9 16:12:00 UTC 2013 (Ubuntu 3.11.0-12.19-generic 3.11.3)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003fffbfff] usable
[    0.000000] BIOS-e820: [mem 0x000000003fffc000-0x000000003fffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000003ffff000-0x000000003fffffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] SMBIOS 2.3 present.
[    0.000000] DMI: ATComputers System Name/P4SP-MX, BIOS ASUS P4SP-MX ACPI BIOS Revision 1004 09/01/2004
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x3fffc max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 base 0D8000000 mask FFC000000 write-combining
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff]
[    0.000000]  [mem 0x37800000-0x379fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x34000000-0x377fffff]
[    0.000000]  [mem 0x34000000-0x377fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x33ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[    0.000000]  [mem 0x37a00000-0x37bfdfff] page 4k
[    0.000000] BRK [0x01b39000, 0x01b39fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35fa4000-0x36fc9fff]
[    0.000000] ACPI: RSDP 000f5520 00014 (v00 ASUS  )
[    0.000000] ACPI: RSDT 3fffc000 00030 (v01 ASUS   P4SP-MX  42302E31 MSFT 31313031)
[    0.000000] ACPI: FACP 3fffc0c0 00074 (v01 ASUS   P4SP-MX  42302E31 MSFT 31313031)
[    0.000000] ACPI: DSDT 3fffc134 02743 (v01   ASUS P4SP-MX  00001000 MSFT 0100000B)
[    0.000000] ACPI: FACS 3ffff000 00040
[    0.000000] ACPI: BOOT 3fffc030 00028 (v01 ASUS   P4SP-MX  42302E31 MSFT 31313031)
[    0.000000] ACPI: APIC 3fffc058 0005A (v01 ASUS   P4SP-MX  42302E31 MSFT 31313031)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 131MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] BRK [0x01b3a000, 0x01b3afff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x37bfdfff]
[    0.000000]   HighMem  [mem 0x37bfe000-0x3fffbfff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x3fffbfff]
[    0.000000] On node 0 totalpages: 262042
[    0.000000] free_area_init_node: node 0, pgdat c1948bc0, node_mem_map f73fe020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 1752 pages used for memmap
[    0.000000]   Normal zone: 224254 pages, LIFO batch:31
[    0.000000]   HighMem zone: 264 pages used for memmap
[    0.000000]   HighMem zone: 33790 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0xe408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 128, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x40000000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f73e9000 s36288 r0 d21056 u57344
[    0.000000] pcpu-alloc: s36288 r0 d21056 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260258
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=d97ce1e1-fb63-4ec8-9693-5d280a668386 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 2097112 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00037bfe:0003fffc)
[    0.000000] Memory: 1008936K/1048168K available (6351K kernel code, 607K rwdata, 2640K rodata, 880K init, 908K bss, 39232K reserved, 135160K highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff14000 - 0xfffff000   ( 940 kB)
[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
[    0.000000]       .init : 0xc1962000 - 0xc1a3e000   ( 880 kB)
[    0.000000]       .data : 0xc16341e4 - 0xc1961e00   (3255 kB)
[    0.000000]       .text : 0xc1000000 - 0xc16341e4   (6352 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=f5806000 soft=f5808000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2792.955 MHz processor
[    0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5585.91 BogoMIPS (lpj=11171820)
[    0.004010] pid_max: default: 32768 minimum: 301
[    0.004068] Security Framework initialized
[    0.004103] AppArmor: AppArmor initialized
[    0.004107] Yama: becoming mindful.
[    0.004195] Mount-cache hash table entries: 512
[    0.004555] Initializing cgroup subsys memory
[    0.004576] Initializing cgroup subsys devices
[    0.004580] Initializing cgroup subsys freezer
[    0.004584] Initializing cgroup subsys blkio
[    0.004587] Initializing cgroup subsys perf_event
[    0.004592] Initializing cgroup subsys hugetlb
[    0.004645] CPU0: Hyper-Threading is disabled
[    0.004653] mce: CPU supports 4 MCE banks
[    0.004669] CPU0: Thermal monitoring enabled (TM1)
[    0.004694] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128
[    0.004694] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64
[    0.004694] tlb_flushall_shift: 6
[    0.026692] Freeing SMP alternatives memory: 28K (c1a3e000 - c1a45000)
[    0.030101] ACPI: Core revision 20130517
[    0.031808] ACPI: All ACPI Tables successfully acquired
[    0.032029] ftrace: allocating 27134 entries in 53 pages
[    0.044185] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.044511] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.086093] smpboot: CPU0: Intel(R) Celeron(R) CPU 2.80GHz (fam: 0f, model: 03, stepping: 03)
[    0.088000] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[    0.088000] ... version:                0
[    0.088000] ... bit width:              40
[    0.088000] ... generic registers:      18
[    0.088000] ... value mask:             000000ffffffffff
[    0.088000] ... max period:             0000007fffffffff
[    0.088000] ... fixed-purpose events:   0
[    0.088000] ... event mask:             000000000003ffff
[    0.088000] Brought up 1 CPUs
[    0.088000] smpboot: Total of 1 processors activated (5585.91 BogoMIPS)
[    0.088000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.088000] devtmpfs: initialized
[    0.088235] EVM: security.selinux
[    0.088240] EVM: security.SMACK64
[    0.088242] EVM: security.capability
[    0.088438] PM: Registering ACPI NVS region [mem 0x3ffff000-0x3fffffff] (4096 bytes)
[    0.090285] regulator-dummy: no parameters
[    0.090338] RTC time: 11:24:31, date: 04/13/14
[    0.090425] NET: Registered protocol family 16
[    0.090711] EISA bus registered
[    0.090841] ACPI: bus type PCI registered
[    0.090848] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.092485] PCI: PCI BIOS revision 2.10 entry at 0xf1020, last bus=1
[    0.092489] PCI: Using configuration type 1 for base access
[    0.094392] bio: create slab <bio-0> at 0
[    0.094724] ACPI: Added _OSI(Module Device)
[    0.094730] ACPI: Added _OSI(Processor Device)
[    0.094733] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.094736] ACPI: Added _OSI(Processor Aggregator Device)
[    0.095332] ACPI: EC: Look up EC in DSDT
[    0.100065] ACPI: Interpreter enabled
[    0.100097] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[    0.100122] ACPI: (supports S0 S1 S3 S4 S5)
[    0.100126] ACPI: Using IOAPIC for interrupt routing
[    0.100389] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.100493] ACPI: No dock devices found.
[    0.125021] acpi LNXCPU:00: Invalid PBLK length [5]
[    0.125189] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.125326] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.125463] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.125602] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.125739] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.125876] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
[    0.125995] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.126130] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
[    0.126247] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.126258] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.126262] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.126415] acpi PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.126421] acpi PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.126425] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.126429] acpi PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[    0.126433] acpi PNP0A03:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)
[    0.126437] PCI: root bus 00: using default resources
[    0.126442] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.



[Majis007]

pokračování

Kód: [Vybrat]

[    0.126577] PCI host bridge to bus 0000:00
[    0.126586] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.126590] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.126594] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[    0.126618] pci 0000:00:00.0: [1039:0651] type 00 class 0x060000
[    0.126635] pci 0000:00:00.0: reg 0x10: [mem 0xd8000000-0xdbffffff]
[    0.126811] pci 0000:00:01.0: [1039:0001] type 01 class 0x060400
[    0.126900] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.126960] pci 0000:00:02.0: [1039:0962] type 00 class 0x060100
[    0.127049] pci 0000:00:02.0: Enabling SiS 96x SMBus
[    0.127148] pci 0000:00:02.1: [1039:0016] type 00 class 0x0c0500
[    0.127214] pci 0000:00:02.1: reg 0x20: [io  0xe600-0xe61f]
[    0.127329] pci 0000:00:02.5: [1039:5513] type 00 class 0x01018a
[    0.127364] pci 0000:00:02.5: reg 0x10: [io  0xb800-0xb807]
[    0.127379] pci 0000:00:02.5: reg 0x14: [io  0xb400-0xb403]
[    0.127393] pci 0000:00:02.5: reg 0x18: [io  0xb000-0xb007]
[    0.127407] pci 0000:00:02.5: reg 0x1c: [io  0xa800-0xa803]
[    0.127420] pci 0000:00:02.5: reg 0x20: [io  0xa400-0xa40f]
[    0.127547] pci 0000:00:02.7: [1039:7012] type 00 class 0x040100
[    0.127573] pci 0000:00:02.7: reg 0x10: [io  0x9400-0x94ff]
[    0.127588] pci 0000:00:02.7: reg 0x14: [io  0x9000-0x907f]
[    0.127682] pci 0000:00:02.7: supports D1 D2
[    0.127686] pci 0000:00:02.7: PME# supported from D3hot D3cold
[    0.127775] pci 0000:00:03.0: [1039:7001] type 00 class 0x0c0310
[    0.127797] pci 0000:00:03.0: reg 0x10: [mem 0xd7000000-0xd7000fff]
[    0.127913] pci 0000:00:03.0: System wakeup disabled by ACPI
[    0.127976] pci 0000:00:03.1: [1039:7001] type 00 class 0x0c0310
[    0.127998] pci 0000:00:03.1: reg 0x10: [mem 0xd6800000-0xd6800fff]
[    0.128129] pci 0000:00:03.1: System wakeup disabled by ACPI
[    0.128203] pci 0000:00:03.3: [1039:7002] type 00 class 0x0c0320
[    0.128230] pci 0000:00:03.3: reg 0x10: [mem 0xd6000000-0xd6000fff]
[    0.128332] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[    0.128382] pci 0000:00:03.3: System wakeup disabled by ACPI
[    0.128463] pci 0000:00:04.0: [1039:0900] type 00 class 0x020000
[    0.128490] pci 0000:00:04.0: reg 0x10: [io  0x8800-0x88ff]
[    0.128506] pci 0000:00:04.0: reg 0x14: [mem 0xd5800000-0xd5800fff]
[    0.128564] pci 0000:00:04.0: reg 0x30: [mem 0xdfee0000-0xdfefffff pref]
[    0.128604] pci 0000:00:04.0: supports D1 D2
[    0.128608] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.128724] pci 0000:00:0f.0: [11c1:048c] type 00 class 0x078000
[    0.128751] pci 0000:00:0f.0: reg 0x10: [mem 0xd5000000-0xd50000ff]
[    0.128766] pci 0000:00:0f.0: reg 0x14: [io  0x8400-0x8407]
[    0.128781] pci 0000:00:0f.0: reg 0x18: [io  0x8000-0x80ff]
[    0.128864] pci 0000:00:0f.0: supports D2
[    0.128868] pci 0000:00:0f.0: PME# supported from D2 D3hot D3cold
[    0.129048] pci 0000:01:00.0: [1002:95c6] type 00 class 0x030000
[    0.129078] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[    0.129092] pci 0000:01:00.0: reg 0x14: [io  0xd800-0xd8ff]
[    0.129105] pci 0000:01:00.0: reg 0x18: [mem 0xd7800000-0xd780ffff]
[    0.129147] pci 0000:01:00.0: reg 0x30: [mem 0xdffe0000-0xdfffffff pref]
[    0.129198] pci 0000:01:00.0: supports D1 D2
[    0.129293] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.129301] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.129308] pci 0000:00:01.0:   bridge window [mem 0xd7800000-0xd7ffffff]
[    0.129315] pci 0000:00:01.0:   bridge window [mem 0xdff00000-0xfebfffff pref]
[    0.129329] pci_bus 0000:00: on NUMA node 0
[    0.131934] ACPI: \_SB_.PCI0: notify handler is installed
[    0.131968] Found 1 acpi root devices
[    0.132224] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.132229] vgaarb: loaded
[    0.132231] vgaarb: bridge control possible 0000:01:00.0
[    0.132603] SCSI subsystem initialized
[    0.132612] ACPI: bus type ATA registered
[    0.132726] libata version 3.00 loaded.
[    0.132769] ACPI: bus type USB registered
[    0.132815] usbcore: registered new interface driver usbfs
[    0.132837] usbcore: registered new interface driver hub
[    0.132901] usbcore: registered new device driver usb
[    0.133156] PCI: Using ACPI for IRQ routing
[    0.133166] PCI: pci_cache_line_size set to 64 bytes
[    0.133227] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.133231] e820: reserve RAM buffer [mem 0x3fffc000-0x3fffffff]
[    0.133432] NetLabel: Initializing
[    0.133436] NetLabel:  domain hash size = 128
[    0.133438] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.133455] NetLabel:  unlabeled traffic allowed by default
[    0.133698] Switched to clocksource refined-jiffies
[    0.143878] AppArmor: AppArmor Filesystem Enabled
[    0.143948] pnp: PnP ACPI init
[    0.143977] ACPI: bus type PNP registered
[    0.144257] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.144265] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.144270] system 00:00: [mem 0x00100000-0x3fffffff] could not be reserved
[    0.144275] system 00:00: [mem 0xfec00000-0xfec000ff] could not be reserved
[    0.144279] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.144287] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.144698] system 00:01: [io  0xe400-0xe47f] has been reserved
[    0.144705] system 00:01: [io  0xe480-0xe4ff] has been reserved
[    0.144710] system 00:01: [io  0xe600-0xe61f] has been reserved
[    0.144714] system 00:01: [io  0x0480-0x048f] has been reserved
[    0.144719] system 00:01: [mem 0xffee0000-0xffefffff] has been reserved
[    0.144725] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.144819] system 00:02: [mem 0xfffe0000-0xffffffff] could not be reserved
[    0.144827] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.144936] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.144944] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.145061] pnp 00:04: [dma 4]
[    0.145109] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.145194] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.145251] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.145310] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.145658] pnp 00:08: [dma 2]
[    0.145737] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.146638] pnp 00:09: [dma 3]
[    0.146736] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.147440] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.148158] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.149133] pnp 00:0c: Plug and Play ACPI device, IDs PNPb02f (active)
[    0.149251] system 00:0d: [io  0x03f0-0x03f1] has been reserved
[    0.149258] system 00:0d: [io  0x0290-0x0297] has been reserved
[    0.149264] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.149285] pnp: PnP ACPI: found 14 devices
[    0.149287] ACPI: bus type PNP unregistered
[    0.149295] PnPBIOS: Disabled by ACPI PNP
[    0.187259] Switched to clocksource acpi_pm
[    0.187304] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.187312] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.187321] pci 0000:00:01.0:   bridge window [mem 0xd7800000-0xd7ffffff]
[    0.187328] pci 0000:00:01.0:   bridge window [mem 0xdff00000-0xfebfffff pref]
[    0.187351] pci 0000:00:01.0: setting latency timer to 64
[    0.187358] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.187362] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[    0.187366] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.187369] pci_bus 0000:01: resource 1 [mem 0xd7800000-0xd7ffffff]
[    0.187373] pci_bus 0000:01: resource 2 [mem 0xdff00000-0xfebfffff pref]
[    0.187435] NET: Registered protocol family 2
[    0.187773] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.187817] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.187858] TCP: Hash tables configured (established 8192 bind 8192)
[    0.187935] TCP: reno registered
[    0.187944] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.187961] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.187961] NET: Registered protocol family 1
[    0.332362] pci 0000:01:00.0: Boot video device
[    0.332371] PCI: CLS 32 bytes, default 64
[    0.332468] Trying to unpack rootfs image as initramfs...
[    0.890621] Freeing initrd memory: 16536K (f5fa4000 - f6fca000)
[    0.890789] Simple Boot Flag at 0x3a set to 0x1
[    0.890956] Scanning for low memory corruption every 60 seconds
[    0.891316] Initialise module verification
[    0.891396] audit: initializing netlink socket (disabled)
[    0.891421] type=2000 audit(1397388271.887:1): initialized
[    0.923230] bounce pool size: 64 pages
[    0.923250] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.925377] zbud: loaded
[    0.925579] VFS: Disk quotas dquot_6.5.2
[    0.925669] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.926622] fuse init (API version 7.22)
[    0.926812] msgmni has been set to 1738
[    0.927573] Key type asymmetric registered
[    0.927580] Asymmetric key parser 'x509' registered
[    0.927667] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.927755] io scheduler noop registered
[    0.927760] io scheduler deadline registered (default)
[    0.927824] io scheduler cfq registered
[    0.928063] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.928094] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.928336] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.928347] ACPI: Power Button [PWRB]
[    0.928429] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.928436] ACPI: Power Button [PWRF]
[    0.928590] GHES: HEST is not enabled!
[    0.928831] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.949392] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.949496] isapnp: Scanning for PnP cards...
[    1.044763] Linux agpgart interface v0.103
[    1.047303] brd: module loaded
[    1.092388] loop: module loaded
[    1.092640] pata_sis 0000:00:02.5: version 0.5.2
[    1.092839] pata_sis 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133 controller
[    1.093380] scsi0 : pata_sis
[    1.093829] scsi1 : pata_sis
[    1.094143] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xa400 irq 14
[    1.094149] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xa408 irq 15
[    1.094706] libphy: Fixed MDIO Bus: probed
[    1.094882] tun: Universal TUN/TAP device driver, 1.6
[    1.094885] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.094998] PPP generic driver version 2.4.2
[    1.095113] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.095118] ehci-pci: EHCI PCI platform driver
[    1.095315] ehci-pci 0000:00:03.3: EHCI Host Controller
[    1.095331] ehci-pci 0000:00:03.3: new USB bus registered, assigned bus number 1
[    1.095413] ehci-pci 0000:00:03.3: irq 23, io mem 0xd6000000
[    1.139244] ehci-pci 0000:00:03.3: USB 2.0 started, EHCI 1.00
[    1.139308] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.139313] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.139316] usb usb1: Product: EHCI Host Controller
[    1.139320] usb usb1: Manufacturer: Linux 3.11.0-12-generic ehci_hcd
[    1.139323] usb usb1: SerialNumber: 0000:00:03.3
[    1.139550] hub 1-0:1.0: USB hub found
[    1.139560] hub 1-0:1.0: 6 ports detected
[    1.139775] ehci-platform: EHCI generic platform driver
[    1.139799] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.139803] ohci-platform: OHCI generic platform driver
[    1.139816] uhci_hcd: USB Universal Host Controller Interface driver
[    1.139951] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.139955] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.140203] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.140430] mousedev: PS/2 mouse device common for all mice
[    1.140711] rtc_cmos 00:05: RTC can wake from S4
[    1.140899] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.140936] rtc_cmos 00:05: alarms up to one month, 242 bytes nvram
[    1.141077] device-mapper: uevent: version 1.0.3
[    1.141214] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[    1.141269] platform eisa.0: Probing EISA bus 0
[    1.141304] platform eisa.0: EISA: Detected 0 cards
[    1.141318] cpufreq-nforce2: No nForce2 chipset.
[    1.141325] cpuidle: using governor ladder
[    1.141327] cpuidle: using governor menu
[    1.141351] ledtrig-cpu: registered to indicate activity on CPUs
[    1.141510] TCP: cubic registered
[    1.141670] NET: Registered protocol family 10
[    1.142001] NET: Registered protocol family 17
[    1.142035] Key type dns_resolver registered
[    1.142326] Using IPI No-Shortcut mode
[    1.142513] PM: Hibernation image not present or could not be loaded.
[    1.142524] Loading module verification certificates
[    1.191420] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 4b7c2664fb134f99aaf5e09f5b6d30d43b5eac95'
[    1.191453] registered taskstats version 1
[    1.240580] Key type trusted registered
[    1.245905] Key type encrypted registered
[    1.251301] AppArmor: AppArmor sha1 policy hashing enabled
[    1.251658]   Magic number: 10:503:428
[    1.251788] rtc_cmos 00:05: setting system clock to 2014-04-13 11:24:33 UTC (1397388273)
[    1.251931] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.251935] EDD information not available.
[    1.339397] isapnp: No Plug & Play device found
[    1.345937] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    1.888028] tsc: Refined TSC clocksource calibration: 2792.999 MHz
[    2.888090] Switched to clocksource tsc
[    6.264020] ata1: link is slow to respond, please be patient (ready=0)
[   11.136017] ata1: SRST failed (errno=-16)
[   16.332017] ata1: link is slow to respond, please be patient (ready=0)
[   21.148017] ata1: SRST failed (errno=-16)
[   26.344016] ata1: link is slow to respond, please be patient (ready=0)
[   51.208057] ata1.01: link status unknown, clearing UNKNOWN to NONE
[   51.232380] ata1.00: ATA-6: WDC WD800JB-00JJA0, 05.01C05, max UDMA/100
[   51.232387] ata1.00: 156301488 sectors, multi 16: LBA
[   51.240359] ata1.00: configured for UDMA/100
[   51.240568] scsi 0:0:0:0: Direct-Access     ATA      WDC WD800JB-00JJ 05.0 PQ: 0 ANSI: 5
[   51.240958] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[   51.241070] sd 0:0:0:0: [sda] Write Protect is off
[   51.241076] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   51.241124] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   51.241458] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   51.292794]  sda: sda1 sda2 < sda5 sda6 >
[   51.293512] sd 0:0:0:0: [sda] Attached SCSI disk
[   51.404292] ata2.00: ATAPI: SONY    DVD RW DW-D23A, CYS1, max UDMA/66
[   51.404306] ata2.00: limited to UDMA/33 due to 40-wire cable
[   51.420264] ata2.00: configured for UDMA/33
[   51.421580] scsi 1:0:0:0: CD-ROM            SONY     DVD RW DW-D23A   CYS1 PQ: 0 ANSI: 5
[   51.424051] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[   51.424057] cdrom: Uniform CD-ROM driver Revision: 3.20
[   51.424266] sr 1:0:0:0: Attached scsi CD-ROM sr0
[   51.424408] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   51.425554] Freeing unused kernel memory: 880K (c1962000 - c1a3e000)
[   51.425626] Write protecting the kernel text: 6356k
[   51.425699] Write protecting the kernel read-only data: 2644k
[   51.464469] systemd-udevd[94]: starting version 204
[   51.543391] floppy: module verification failed: signature and/or required key missing - tainting kernel
[   51.545394] Floppy drive(s): fd0 is 1.44M
[   51.563912] FDC 0 is a post-1991 82077
[   51.605219] sis900.c: v1.08.10 Apr. 2 2006
[   51.607004] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
[   51.619851] 0000:00:04.0: Using transceiver found at address 1 as default
[   51.632813] eth0: SiS 900 PCI Fast Ethernet at 0x00018800, IRQ 19, 00:11:2f:ae:50:df
[   52.147814] EXT4-fs (sda5): INFO: recovery required on readonly filesystem
[   52.147822] EXT4-fs (sda5): write access will be enabled during recovery
[   53.079755] EXT4-fs (sda5): recovery complete
[   53.087184] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   64.017375] Adding 1047548k swap on /dev/sda6.  Priority:-1 extents:1 across:1047548k FS
[   64.110197] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   64.316640] systemd-udevd[254]: starting version 204
[   64.459994] lp: driver loaded but no devices found
[   64.561707] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   64.896384] parport_pc 00:09: reported by Plug and Play ACPI
[   64.896462] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   64.991646] lp0: using parport0 (interrupt-driven).
[   65.187439] gameport gameport0: NS558 PnP Gameport is pnp00:0c/gameport0, io 0x200, speed 736kHz
[   65.268717] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0xe600
[   65.287711] agpgart-sis 0000:00:00.0: SiS chipset [1039/0651]
[   65.309795] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xd8000000
[   65.448099] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   65.519373] ohci-pci: OHCI PCI platform driver
[   65.519588] ohci-pci 0000:00:03.0: OHCI PCI host controller
[   65.519605] ohci-pci 0000:00:03.0: new USB bus registered, assigned bus number 2
[   65.519642] ohci-pci 0000:00:03.0: irq 9, io mem 0xd7000000
[   65.582580] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[   65.582589] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   65.582593] usb usb2: Product: OHCI PCI host controller
[   65.582597] usb usb2: Manufacturer: Linux 3.11.0-12-generic ohci_hcd
[   65.582601] usb usb2: SerialNumber: 0000:00:03.0
[   65.663329] hub 2-0:1.0: USB hub found
[   65.663353] hub 2-0:1.0: 3 ports detected
[   65.665223] ohci-pci 0000:00:03.1: OHCI PCI host controller
[   65.665243] ohci-pci 0000:00:03.1: new USB bus registered, assigned bus number 3
[   65.665297] ohci-pci 0000:00:03.1: irq 21, io mem 0xd6800000
[   65.722118] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[   65.722126] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   65.722131] usb usb3: Product: OHCI PCI host controller
[   65.722134] usb usb3: Manufacturer: Linux 3.11.0-12-generic ohci_hcd
[   65.722138] usb usb3: SerialNumber: 0000:00:03.1
[   65.728635] hub 3-0:1.0: USB hub found
[   65.728655] hub 3-0:1.0: 3 ports detected
[   65.730828] [drm] Initialized drm 1.1.0 20060810
[   66.184095] usb 3-1: new low-speed USB device number 2 using ohci-pci
[   66.190151] microcode: CPU0 sig=0xf33, pf=0x4, revision=0xb
[   66.387083] usb 3-1: New USB device found, idVendor=045e, idProduct=0083
[   66.387092] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   66.387096] usb 3-1: Product: Basic Optical Mouse
[   66.387100] usb 3-1: Manufacturer: Microsoft
[   66.694043] Bluetooth: Core ver 2.16
[   66.694103] NET: Registered protocol family 31
[   66.694104] Bluetooth: HCI device and connection manager initialized
[   66.694118] Bluetooth: HCI socket layer initialized
[   66.694121] Bluetooth: L2CAP socket layer initialized
[   66.694130] Bluetooth: SCO socket layer initialized
[   66.755656] type=1400 audit(1397381138.999:2): apparmor="STATUS" operation="profile_load" parent=422 profile="unconfined" name="/sbin/dhclient" pid=435 comm="apparmor_parser"
[   66.755675] type=1400 audit(1397381138.999:3): apparmor="STATUS" operation="profile_load" parent=422 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=435 comm="apparmor_parser"
[   66.755685] type=1400 audit(1397381138.999:4): apparmor="STATUS" operation="profile_load" parent=422 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=435 comm="apparmor_parser"
[   66.773137] [drm] radeon kernel modesetting enabled.
[   66.777702] type=1400 audit(1397381139.023:5): apparmor="STATUS" operation="profile_replace" parent=422 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=435 comm="apparmor_parser"
[   66.777724] type=1400 audit(1397381139.023:6): apparmor="STATUS" operation="profile_replace" parent=422 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=435 comm="apparmor_parser"
[   66.778272] type=1400 audit(1397381139.023:7): apparmor="STATUS" operation="profile_replace" parent=422 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=435 comm="apparmor_parser"
[   66.789099] [drm] initializing kernel modesetting (RV620 0x1002:0x95C6 0x174B:0x0028).
[   66.789137] [drm] register mmio base: 0xD7800000
[   66.789140] [drm] register mmio size: 65536
[   66.790542] ATOM BIOS:
[   66.790599] agpgart-sis 0000:00:00.0: AGP 2.0 bridge
[   66.790628] agpgart-sis 0000:00:00.0: putting AGP V2 device into 4x mode
[   66.790680] radeon 0000:01:00.0: putting AGP V2 device into 4x mode
[   66.790686] radeon 0000:01:00.0: GTT: 64M 0xD8000000 - 0xDBFFFFFF
[   66.790695] radeon 0000:01:00.0: VRAM: 512M 0xB8000000 - 0xD7FFFFFF (512M used)
[   66.790699] [drm] Detected VRAM RAM=512M, BAR=256M
[   66.790701] [drm] RAM width 64bits DDR
[   66.807056] Bluetooth: RFCOMM TTY layer initialized
[   66.807083] Bluetooth: RFCOMM socket layer initialized
[   66.807087] Bluetooth: RFCOMM ver 1.11
[   66.826647] type=1400 audit(1397381139.071:8): apparmor="STATUS" operation="profile_load" parent=422 profile="unconfined" name="/usr/sbin/ntpd" pid=436 comm="apparmor_parser"
[   66.881562] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   66.881571] Bluetooth: BNEP filters: protocol multicast
[   66.881590] Bluetooth: BNEP socket layer initialized
[   66.917101] [TTM] Zone  kernel: Available graphics memory: 445610 kiB
[   66.917108] [TTM] Zone highmem: Available graphics memory: 513190 kiB
[   66.917111] [TTM] Initializing pool allocator
[   66.917120] [TTM] Initializing DMA pool allocator
[   66.917169] [drm] radeon: 512M of VRAM memory ready
[   66.917174] [drm] radeon: 64M of GTT memory ready.
[   66.917211] [drm] GART: num cpu pages 16384, num gpu pages 16384
[   66.926289] [drm] Loading RV620 Microcode
[   67.283215] radeon 0000:01:00.0: WB disabled
[   67.283231] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000d8000004 and cpu addr 0xf8482004
[   67.283238] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x00000000d8000c0c and cpu addr 0xf8482c0c
[   67.283245] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   67.283248] [drm] Driver supports precise vblank timestamp query.
[   67.283297] [drm] radeon: irq initialized.
[   67.353581] [drm] ring test on 0 succeeded in 1 usecs
[   67.353649] [drm] ring test on 3 succeeded in 1 usecs
[   67.354030] [drm] ib test on ring 0 succeeded in 0 usecs
[   67.354059] [drm] ib test on ring 3 succeeded in 1 usecs
[   67.550497] ppdev: user-space parallel port driver
[   67.577629] [drm] Radeon Display Connectors
[   67.577639] [drm] Connector 0:
[   67.577643] [drm]   VGA-1
[   67.577647] [drm]   DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[   67.577649] [drm]   Encoders:
[   67.577652] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[   67.577654] [drm] Connector 1:
[   67.577657] [drm]   HDMI-A-1
[   67.577659] [drm]   HPD1
[   67.577662] [drm]   DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[   67.577664] [drm]   Encoders:
[   67.577666] [drm]     DFP1: INTERNAL_UNIPHY
[   67.577668] [drm] Connector 2:
[   67.577671] [drm]   DVI-I-1
[   67.577673] [drm]   HPD2
[   67.577676] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[   67.577678] [drm]   Encoders:
[   67.577680] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   67.577682] [drm]     DFP2: INTERNAL_KLDSCP_LVTMA
[   67.577737] [drm] Internal thermal controller with fan control
[   67.584801] [drm] radeon: power management initialized
[   67.761515] init: avahi-cups-reload main process (458) terminated with status 1
[   68.033809] type=1400 audit(1397381140.279:9): apparmor="STATUS" operation="profile_load" parent=473 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=489 comm="apparmor_parser"
[   68.033828] type=1400 audit(1397381140.279:10): apparmor="STATUS" operation="profile_load" parent=473 profile="unconfined" name="/usr/sbin/cupsd" pid=489 comm="apparmor_parser"
[   68.035053] type=1400 audit(1397381140.279:11): apparmor="STATUS" operation="profile_replace" parent=473 profile="unconfined" name="/usr/sbin/cupsd" pid=489 comm="apparmor_parser"
[   69.364860] intel8x0_measure_ac97_clock: measured 98441 usecs (4731 samples)
[   69.364870] intel8x0: clocking to 48000
[   69.486550] init: failsafe main process (513) killed by TERM signal
[   69.542455] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   69.850677] [drm] fb mappable at 0xE0062000
[   69.850686] [drm] vram apper at 0xE0000000
[   69.850689] [drm] size 8294400
[   69.850691] [drm] fb depth is 24
[   69.850694] [drm]    pitch is 7680
[   69.852939] fbcon: radeondrmfb (fb0) is primary device
[   69.972690] hidraw: raw HID events driver (C) Jiri Kosina
[   70.033764] usbcore: registered new interface driver usbhid
[   70.033766] usbhid: USB HID core driver
[   70.080495] Console: switching to colour frame buffer device 240x67
[   70.128385] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[   70.128390] radeon 0000:01:00.0: registered panic notifier
[   70.168135] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:03.1/usb3/3-1/3-1:1.0/input/input3
[   70.191540] hid-generic 0003:045E:0083.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:03.1-1/input0
[   70.211483] [drm] Initialized radeon 2.34.0 20080528 for 0000:01:00.0 on minor 0
[   70.896073] usb 2-3: new full-speed USB device number 2 using ohci-pci
[   71.141112] usb 2-3: New USB device found, idVendor=03f0, idProduct=3f11
[   71.141123] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   71.141127] usb 2-3: Product: psc 1310 series
[   71.141131] usb 2-3: Manufacturer: hp
[   71.141134] usb 2-3: SerialNumber: MY48QCB34NO2
[   71.365264] WARNING! power/level is deprecated; use power/control instead
[   71.524646] usblp 2-3:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x3F11
[   71.530629] usbcore: registered new interface driver usblp
[   74.465281] eth0: Media Link On 100mbps full-duplex
[   76.384987] zram: module is from the staging directory, the quality is unknown, you have been warned.
[   76.392377] zram: Created 1 device(s) ...
[   76.566509] Adding 513188k swap on /dev/zram0.  Priority:5 extents:1 across:513188k SSFS

[Filajs01]

Napojto tak že Ubuntu bude master a ten druhej slave a dej na jeden kabel.

[Majis007]

Tak jsem se spletl, ty disky byly napojeny na jeden řadič.
Prohodil jsem kabel slave a master zapojení a vše funguje jak má
(btw v BIOSu je pořád zobrazena původní konfigurace master-slave)


Dík za rady!

[marun]

nebude to špatně nastavenými jumpery na discích?

[Majis007]

Jo, to bude tím, ale to už řešit nebudu, dokud to bude fungovat

[sabraq]

Jo, to bude tím, ale to už řešit nebudu, dokud to bude fungovat

Správný a citlivý přístup:)