Po pár dnech používání bez problémů Xubuntu najednou nelze spustit

[Ajpi]

Ahoj,
po zapnutí mi naběhne obrazovka, ve které mám na výběr mezi *Ubuntu, Advanced option for Ubuntu, anebo memory testy.
Zvolím ubunutu a na černé obrazovce bílým písmem na mě vyběhne:

Kód: [Vybrat]

/sbin/init: eror while loading shared libraries: /lib/i386-linux-gnu/libjson-c . so . 2 : cannot read file data : Eror 21
[     2.776457] Kernel panic - not syncing : Attempted to kill init! exitcode=0x00007f00
[     2.776504] CPU: 1 PID: 1 Comm: init not tained 3.13.0-30-generic #54-Ubuntu
[     2. 776544] Hardware name: MICRO-STAR INTERNATIONAL CO. ,LTD MS-7368/MS-7368, BIOS V1.5 10/15/2007
[     2.776585] 00000000 00000000 f705df1c c164f6f3 c1933e00 f705df3c c164a82c c182ba58
[     2.761419] c1aa9c80 f705df28 c1933e00 f681780 f 7090000 f705df8c c105911f c182bd7c
[     2.761752] 00007f00 00000004 b76e0f08 00000001 00000020 00000000 00000000 f6861c08
[     2.762085] call Trace:
[     2.762130]  [<c164f6f3>] dump_stack+0x41/0x52
[     2.762172]  [<c164a82c>] panic+0x87/0x181
[     2.762214]  [<c105911f>] do_exit+0x8ef/0x8f0
[     2.829247]  [<c1059194>] do_group_exit+0x34/0xa0
[     2.828287]  [<c1059216>]  Sys_exit_group+0x16/0x20
[     2.829329]  [<c16567c7>]  syscall_call+0x7/0xb
Protože mi to pořád blbne, mám podezření na špatný HW, je to možné?
Vždy nainstaluji Ubuntu, nebo v tomto případě Xubuntu a počítač pár dní jde a pak se objeví něco takového.

Děkuju za pomoc

[ntz_reloaded]

/sbin/init: eror while loading shared libraries: /lib/i386-linux-gnu/libjson-c . so . 2 : cannot read file data : Eror 21

zkus prosim nabootovat z cd a udelat nejaky test na HDD

http://askubuntu.com/questions/317241/can-i-use-ubuntu-to-diagnose-hard-drive-or-ram-problems-in-windows

[Rover623]

Jo, vypadá to na problém se čtením z disku

[Ajpi]

tak jsem zkontroloval disk pres gsmartcontrol
v eror logu je

Kód: [Vybrat]

Complete error log:

SMART Error Log Version: 1
ATA Error Count: 2389 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 2389 occurred at disk power-on lifetime: 20808 hours (867 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 39 ca 7f e0  Error: UNC at LBA = 0x007fca39 = 8374841

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 00 39 ca 7f e0 00      00:34:48.369  READ DMA EXT
  25 00 08 7f fc 76 e0 00      00:34:48.369  READ DMA EXT
  25 00 20 5f 03 75 e0 00      00:34:48.367  READ DMA EXT
  25 00 18 ff 89 40 e0 00      00:34:48.360  READ DMA EXT
  25 00 60 0f 56 54 e0 00      00:34:48.359  READ DMA EXT

Error 2388 occurred at disk power-on lifetime: 20808 hours (867 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 39 ca 7f e0  Error: UNC at LBA = 0x007fca39 = 8374841

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 00 31 ca 7f e0 00      00:34:34.407  READ DMA EXT
  25 00 80 b1 c9 7f e0 00      00:34:34.415  READ DMA EXT
  25 00 80 31 c9 7f e0 00      00:34:34.414  READ DMA EXT
  25 00 80 b1 c8 7f e0 00      00:34:34.414  READ DMA EXT
  25 00 80 31 c8 7f e0 00      00:34:34.413  READ DMA EXT

Error 2387 occurred at disk power-on lifetime: 20807 hours (866 days + 23 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 39 ca 7f e0  Error: UNC at LBA = 0x007fca39 = 8374841

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 00 39 ca 7f e0 00      00:07:03.854  READ DMA EXT
  25 00 40 0f 7a 54 e0 00      00:07:03.854  READ DMA EXT
  25 00 20 ef 79 54 e0 00      00:07:03.917  READ DMA EXT
  25 00 60 0f 56 54 e0 00      00:07:03.902  READ DMA EXT
  25 00 80 8f 55 54 e0 00      00:07:03.895  READ DMA EXT

Error 2386 occurred at disk power-on lifetime: 20807 hours (866 days + 23 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 39 ca 7f e0  Error: UNC at LBA = 0x007fca39 = 8374841

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 00 21 ca 7f e0 00      00:06:43.330  READ DMA EXT
  25 00 40 0f 4b 54 e0 00      00:06:43.303  READ DMA EXT
  25 00 08 67 36 75 e0 00      00:06:43.289  READ DMA EXT
  25 00 66 27 04 03 e0 00      00:06:43.278  READ DMA EXT
  25 00 60 87 64 44 e0 00      00:06:43.277  READ DMA EXT

Error 2385 occurred at disk power-on lifetime: 20807 hours (866 days + 23 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 39 ca 7f e0  Error: UNC at LBA = 0x007fca39 = 8374841

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 40 21 ca 7f e0 00      00:03:16.822  READ DMA EXT
  25 00 08 6f 44 62 e0 00      00:03:16.820  READ DMA EXT
  35 00 08 97 79 5d e0 00      00:03:16.819  WRITE DMA EXT
  25 00 08 07 1a 13 e0 00      00:03:16.790  READ DMA EXT
  25 00 08 c7 55 00 e0 00      00:03:16.898  READ DMA EXTv attributes a self test log je: viz obrazek

tak nevim, vubec se v tom nevyznam....

Diky za pomoc

[příloha smazaná administrátorem]

[Petr Merlin Vaněček]

Ten disk jde do křemíkového nebe, zálohuj co se dá a vyměň.

[Ajpi]

Takze koupit novy jo? Poradil bys mi prosim jaky?
Diky

[Ajpi]

A jak to, ze to vzdycky par dnu jde a pak toto?
Jak to, ze to vubec funguje? I kdyz jen par dni....

Dekuju

[Rover623]

Elektronika to vzdává, to se projevuje takhle