Prosíme přihlašte se nebo zaregistrujte.

Přihlašte se svým uživatelským jménem a heslem.
Vaše pomoc je stále potřeba!

Autor Téma: Grub rescue -> boot_info_script  (Přečteno 1065 krát)

qwertys

  • Návštěvník
  • Příspěvků: 2
Grub rescue -> boot_info_script
« kdy: 07 Srpna 2014, 20:19:41 »
Ahoj..

Formatoval jsem disk na kterem jsem mel ubuntu a w7 .
Pri instalaci w7 ze skryteho disku na my vyskocila hlaska Grub rescue.
Bootoval jsem z flashky na ktere mam linux a projel nekolik navodu google / youtube  kazdy hodil nejaky error v pulce / na konci.

Potreboval bych trosku nakopnout / poradt / hodit link na nejek tutorial (nejlepe step by step problbce) co s tim tedka mam delat uz vubec nevim co tu mam nainstalovane co ne atd ...
Prikladam lod z bootinfoscript.

Kód: [Vybrat]
                  Boot Info Script 0.61      [1 April 2012]


============================= Boot Info Summary: ===============================

 => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
    the same hard drive for core.img. core.img is at this location and looks
    in partition 112 for .
 => Syslinux MBR (3.61-4.03) is installed in the MBR of /dev/sdb.

sda1: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows Vista/7: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System: 
    Boot files:        /bootmgr /boot/bcd

sda2: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows Vista/7: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System: 
    Boot files:        /bootmgr /Boot/BCD

sda3: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows Vista/7: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows 7
    Boot files:        /Windows/System32/winload.exe

sdb1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  SYSLINUX 4.03 2010-10-22 ........>..sr>.......#..9...0...~.....~...f...M.f.f....f..0~....>E}.u......
    Boot sector info:  Syslinux looks at sector 2142480 of /dev/sdb1 for its
                       second stage. SYSLINUX is installed in the  directory.
                       The integrity check of the ADV area failed. No errors
                       found in the Boot Parameter Block.
    Operating System: 
    Boot files:        /syslinux.cfg /ldlinux.sys

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1               2,048    32,051,199    32,049,152  27 Hidden NTFS (Recovery Environment)
/dev/sda2    *     32,051,200    32,255,999       204,800   7 NTFS / exFAT / HPFS
/dev/sda3          32,256,000   976,771,071   944,515,072   7 NTFS / exFAT / HPFS


Drive: sdb _____________________________________________________________________

Disk /dev/sdb: 8426 MB, 8426356736 bytes
114 heads, 49 sectors/track, 2946 cylinders, total 16457728 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1    *            640    16,457,727    16,457,088   c W95 FAT32 (LBA)


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/sda1        B61E28A21E285E1D                       ntfs       Recovery
/dev/sda2        805CE6CB5CE6BAD4                       ntfs       System Reserved
/dev/sda3        F4DAE90BDAE8CB46                       ntfs       
/dev/sdb1        E63B-19D8                              vfat       

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/sdb1        /cdrom                   vfat       (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)


============================== sdb1/syslinux.cfg: ==============================

--------------------------------------------------------------------------------
default menu.c32
prompt 0
menu title UNetbootin
timeout 100

label unetbootindefault
menu label Default
kernel /ubnkern
append initrd=/ubninit file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --

label ubnentry0
menu label ^Help
kernel /ubnkern
append initrd=/ubninit

label ubnentry1
menu label ^Try Ubuntu without installing
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper  quiet splash --

label ubnentry2
menu label ^Install Ubuntu
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity  quiet splash --

label ubnentry3
menu label ^Check disc for defects
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz boot=casper integrity-check  quiet splash --

label ubnentry4
menu label Test ^memory
kernel /install/mt86plus
append initrd=/ubninit

label ubnentry5
menu label ^Boot from first hard disk
kernel /ubnkern
append initrd=/ubninit

--------------------------------------------------------------------------------

================= sdb1: Location of files loaded by Syslinux: ==================

           GiB - GB             File                                 Fragment(s)


============== sdb1: Version of COM32(R) files used by Syslinux: ===============

 menu.c32                           :  COM32R module (v4.xx)

=============================== StdErr Messages: ===============================

bootinfoscript: line 1646: [: 2.73495e+09: integer expression expected
cat: /tmp/BootInfo-LeWeBo8w/Tmp_Log: No such file or directory
  No volume groups found

(jde mi o nainstalovani w7 ze skryteho disku aktualne jsem na ubuntu pres flushku)

Dekuji za pripadne rady.

qwertys

  • Návštěvník
  • Příspěvků: 2
Re:Grub rescue -> boot_info_script
« Odpověď #1 kdy: 08 Srpna 2014, 09:08:08 »
ok muzete loknout uz jsem to vyresil .. :)

lubu

  • Návštěvník
  • Příspěvků: 28
Re:Grub rescue -> boot_info_script
« Odpověď #2 kdy: 09 Srpna 2014, 15:31:21 »
Děkujeme Ti, qwertysi, že jsi se s námi o ten postup - jak to vyřešit - podělil.

 

Provoz zaštiťuje spolek OpenAlt.