a nebo se nauc pouzivat wodim a mkisofs z cli .. stejne tohle "pod kapotou" pouziva brasero i k3b ..
# wodim --help
Usage: wodim [options] track1...trackn
Options:
-version print version information and exit
dev=target SCSI target to use as CD/DVD-Recorder
gracetime=# set the grace time before starting to write to #.
timeout=# set the default SCSI command timeout to #.
debug=#,-d Set to # or increment misc debug level
kdebug=#,kd=# do Kernel debugging
-verbose,-v increment general verbose level by one
-Verbose,-V increment SCSI command transport verbose level by one
-silent,-s do not print status of failed SCSI commands
driver=name user supplied driver name, use with extreme care
driveropts=opt a comma separated list of driver specific options
-setdropts set driver specific options and exit
-checkdrive check if a driver for the drive is present
-prcap print drive capabilities for MMC compliant drives
-inq do an inquiry for the drive and exit
-scanbus scan the SCSI and IDE buses and exit
-reset reset the SCSI bus with the cdrecorder (if possible)
-abort send an abort sequence to the drive (may help if hung)
-overburn allow to write more than the official size of a medium
-ignsize ignore the known size of a medium (may cause problems)
-useinfo use *.inf files to overwrite audio options.
speed=# set speed of drive
blank=type blank a CD-RW disc (see blank=help)
-format format a CD-RW/DVD-RW/DVD+RW disc
formattype=# select the format method for DVD+RW disc
fs=# Set fifo size to # (0 to disable, default is 4 MB)
ts=# set maximum transfer size for a single SCSI command
-load load the disk and exit (works only with tray loader)
-lock load and lock the disk and exit (works only with tray loader)
-eject eject the disk after doing the work
-dummy do everything with laser turned off
-msinfo retrieve multi-session info for genisoimage
-msifile=path run -msinfo and copy output to file
-toc retrieve and print TOC/PMA data
-atip retrieve and print ATIP data
-multi generate a TOC that allows multi session
In this case default track type is CD-ROM XA mode 2 form 1 - 2048 bytes
-fix fixate a corrupt or unfixated disk (generate a TOC)
-nofix do not fixate disk after writing tracks
-waiti wait until input is available before opening SCSI
-immed Try to use the SCSI IMMED flag with certain long lasting commands
-force force to continue on some errors to allow blanking bad disks
-tao Write disk in TAO mode.
-dao Write disk in SAO mode.
-sao Write disk in SAO mode.
-raw Write disk in RAW mode.
-raw96r Write disk in RAW/RAW96R mode.
-raw96p Write disk in RAW/RAW96P mode.
-raw16 Write disk in RAW/RAW16 mode.
-clone Write disk in clone write mode.
tsize=# Length of valid data in next track
padsize=# Amount of padding for next track
pregap=# Amount of pre-gap sectors before next track
defpregap=# Amount of pre-gap sectors for all but track #1
mcn=text Set the media catalog number for this CD to 'text'
isrc=text Set the ISRC number for the next track to 'text'
index=list Set the index list for the next track to 'list'
-text Write CD-Text from information from *.inf or *.cue files
textfile=name Set the file with CD-Text data to 'name'
cuefile=name Set the file with CDRWIN CUE data to 'name'
-audio Subsequent tracks are CD-DA audio tracks
-data Subsequent tracks are CD-ROM data mode 1 - 2048 bytes (default)
-mode2 Subsequent tracks are CD-ROM data mode 2 - 2336 bytes
-xa Subsequent tracks are CD-ROM XA mode 2 form 1 - 2048 bytes
-xa1 Subsequent tracks are CD-ROM XA mode 2 form 1 - 2056 bytes
-xa2 Subsequent tracks are CD-ROM XA mode 2 form 2 - 2324 bytes
-xamix Subsequent tracks are CD-ROM XA mode 2 form 1/2 - 2332 bytes
-cdi Subsequent tracks are CDI tracks
-isosize Use iso9660 file system size for next data track
-preemp Audio tracks are mastered with 50/15 microseconds preemphasis
-nopreemp Audio tracks are mastered with no preemphasis (default)
-copy Audio tracks have unlimited copy permission
-nocopy Audio tracks may only be copied once for personal use (default)
-scms Audio tracks will not have any copy permission at all
-pad Pad data tracks with 15 zeroed sectors
Pad audio tracks to a multiple of 2352 bytes
-nopad Do not pad data tracks (default)
-shorttrack Subsequent tracks may be non Red Book < 4 seconds if in SAO or RAW mode
-noshorttrack Subsequent tracks must be >= 4 seconds
-swab Audio data source is byte-swapped (little-endian/Intel)
The type of the first track is used for the toc type.
Currently only form 1 tracks are supported.
# mkisofs --help
Usage: genisoimage [options] file...
Options:
-nobak Do not include backup files
-no-bak Do not include backup files
-abstract FILE Set Abstract filename
-A ID, -appid ID Set Application ID
-biblio FILE Set Bibliographic filename
-cache-inodes Cache inodes (needed to detect hard links)
-no-cache-inodes Do not cache inodes (if filesystem has no unique unides)
-check-oldnames Check all imported ISO9660 names from old session
-check-session FILE Check all ISO9660 names from previous session
-copyright FILE Set Copyright filename
-debug Set debug flag
-b FILE, -eltorito-boot FILE
Set El Torito boot image name
-eltorito-alt-boot Start specifying alternative El Torito boot parameters
-B FILES, -sparc-boot FILES Set sparc boot image names
-sunx86-boot FILES Set sunx86 boot image names
-G FILE, -generic-boot FILE Set generic boot image name
-sparc-label label text Set sparc boot disk label
-sunx86-label label text Set sunx86 boot disk label
-c FILE, -eltorito-catalog FILE
Set El Torito boot catalog name
-C PARAMS, -cdrecord-params PARAMS
Magic paramters from cdrecord
-d, -omit-period Omit trailing periods from filenames (violates ISO9660)
-dir-mode mode Make the mode of all directories this mode.
-D, -disable-deep-relocation
Disable deep directory relocation (violates ISO9660)
-file-mode mode Make the mode of all plain files this mode.
-f, -follow-links Follow symbolic links
-gid gid Make the group owner of all files this gid.
-graft-points Allow to use graft points for filenames
-root DIR Set root directory for all new files and directories
-old-root DIR Set root directory in previous session that is searched for files
-help Print option help
-hide GLOBFILE Hide ISO9660/RR file
-hide-list FILE File with list of ISO9660/RR files to hide
-hidden GLOBFILE Set hidden attribute on ISO9660 file
-hidden-list FILE File with list of ISO9660 files with hidden attribute
-hide-joliet GLOBFILE Hide Joliet file
-hide-joliet-list FILE File with list of Joliet files to hide
-hide-joliet-trans-tbl Hide TRANS.TBL from Joliet tree
-hide-rr-moved Rename RR_MOVED to .rr_moved in Rock Ridge tree
-gui Switch behaviour for GUI
-i ADD_FILES No longer supported
-input-charset CHARSET Local input charset for file name conversion
-output-charset CHARSET Output charset for file name conversion
-iso-level LEVEL Set ISO9660 conformance level (1..3) or 4 for ISO9660 version 2
-J, -joliet Generate Joliet directory information
-joliet-long Allow Joliet file names to be 103 Unicode characters
-jcharset CHARSET Local charset for Joliet directory information
-l, -full-iso9660-filenames Allow full 31 character filenames for ISO9660 names
-max-iso9660-filenames Allow 37 character filenames for ISO9660 names (violates ISO9660)
-allow-limited-size Allow different file sizes in ISO9660/UDF on large files
-allow-leading-dots Allow ISO9660 filenames to start with '.' (violates ISO9660)
-ldots Allow ISO9660 filenames to start with '.' (violates ISO9660)
-L, -allow-leading-dots Allow ISO9660 filenames to start with '.' (violates ISO9660)
-log-file LOG_FILE Re-direct messages to LOG_FILE
-m GLOBFILE, -exclude GLOBFILE
Exclude file name
-exclude-list FILE File with list of file names to exclude
-pad Pad output to a multiple of 32k (default)
-no-pad Do not pad output to a multiple of 32k
-M FILE, -prev-session FILE Set path to previous session to merge
-dev SCSIdev Set path to previous session to merge
-N, -omit-version-number Omit version number from ISO9660 filename (violates ISO9660)
-new-dir-mode mode Mode used when creating new directories.
-force-rr Inhibit automatic Rock Ridge detection for previous session
-no-rr Inhibit reading of Rock Ridge attributes from previous session
-no-split-symlink-components
Inhibit splitting symlink components
-no-split-symlink-fields Inhibit splitting symlink fields
-o FILE, -output FILE Set output file name
-path-list FILE File with list of pathnames to process
-p PREP, -preparer PREP Set Volume preparer
-print-size Print estimated filesystem size and exit
-publisher PUB Set Volume publisher
-P PUB, -publisher PUB Set Volume publisher
-quiet Run quietly
-r, -rational-rock Generate rationalized Rock Ridge directory information
-R, -rock Generate Rock Ridge directory information
-s TYPE, -sectype TYPE Set output sector type to e.g. data/xa1/raw
-alpha-boot FILE Set alpha boot image name (relative to image root)
-hppa-cmdline CMDLINE Set hppa boot command line (relative to image root)
-hppa-kernel-32 FILE Set hppa 32-bit image name (relative to image root)
-hppa-kernel-64 FILE Set hppa 64-bit image name (relative to image root)
-hppa-bootloader FILE Set hppa boot loader file name (relative to image root)
-hppa-ramdisk FILE Set hppa ramdisk file name (relative to image root)
-mips-boot FILE Set mips boot image name (relative to image root)
-mipsel-boot FILE Set mipsel boot image name (relative to image root)
-jigdo-jigdo FILE Produce a jigdo .jigdo file as well as the .iso
-jigdo-template FILE Produce a jigdo .template file as well as the .iso
-jigdo-min-file-size SIZE Minimum size for a file to be listed in the jigdo file
-jigdo-force-md5 PATTERN Pattern(s) where files MUST match an externally-supplied MD5sum
-jigdo-exclude PATTERN Pattern(s) to exclude from the jigdo file
-jigdo-map PATTERN1=PATTERN2
Pattern(s) to map paths (e.g. Debian=/mirror/debian)
-md5-list FILE File containing MD5 sums of the files that should be checked
-jigdo-template-compress ALGORITHM
Choose to use gzip or bzip2 compression for template data; default is gzip
-checksum_algorithm_iso alg1,alg2,...
Specify the checksum types desired for the output image
-checksum_algorithm_template alg1,alg2,...
Specify the checksum types desired for the output jigdo template
-sort FILE Sort file content locations according to rules in FILE
-split-output Split output into files of approx. 1GB size
-stream-file-name FILE_NAME Set the stream file ISO9660 name (incl. version)
-stream-media-size # Set the size of your CD media in sectors
-sysid ID Set System ID
-T, -translation-table Generate translation tables for systems that don't understand long filenames
-table-name TABLE_NAME Translation table file name
-ucs-level LEVEL Set Joliet UCS level (1..3)
-udf Generate UDF file system
-dvd-video Generate DVD-Video compliant UDF file system
-uid uid Make the owner of all files this uid.
-U, -untranslated-filenames Allow Untranslated filenames (for HPUX & AIX - violates ISO9660). Forces -l, -d, -N, -allow-leading-dots, -relaxed-filenames, -allow-lowercase, -allow-multidot
-relaxed-filenames Allow 7 bit ASCII except lower case characters (violates ISO9660)
-no-iso-translate Do not translate illegal ISO characters '~', '-' and '#' (violates ISO9660)
-allow-lowercase Allow lower case characters in addition to the current character set (violates ISO9660)
-allow-multidot Allow more than one dot in filenames (e.g. .tar.gz) (violates ISO9660)
-use-fileversion LEVEL Use file version # from filesystem
-v, -verbose Verbose
-version Print the current version
-V ID, -volid ID Set Volume ID
-volset ID Set Volume set ID
-volset-size # Set Volume set size
-volset-seqno # Set Volume set sequence number
-x FILE, -old-exclude FILE Exclude file name(depreciated)
-hard-disk-boot Boot image is a hard disk image
-no-emul-boot Boot image is 'no emulation' image
-no-boot Boot image is not bootable
-boot-load-seg # Set load segment for boot image
-boot-load-size # Set numbers of load sectors
-boot-info-table Patch boot image with info table
-XA Generate XA directory attruibutes
-xa Generate rationalized XA directory attruibutes
-z, -transparent-compression
Enable transparent compression of files
-hfs-type TYPE Set HFS default TYPE
-hfs-creator CREATOR Set HFS default CREATOR
-g, -apple Add Apple ISO9660 extensions
-h, -hfs Create ISO9660/HFS hybrid
-map MAPPING_FILE Map file extensions to HFS TYPE/CREATOR
-H MAPPING_FILE, -map MAPPING_FILE
Map file extensions to HFS TYPE/CREATOR
-magic FILE Magic file for HFS TYPE/CREATOR
-probe Probe all files for Apple/Unix file types
-mac-name Use Macintosh name for ISO9660/Joliet/RockRidge file name
-no-mac-files Do not look for Unix/Mac files (depreciated)
-boot-hfs-file FILE Set HFS boot image name
-part Generate HFS partition table
-cluster-size SIZE Cluster size for PC Exchange Macintosh files
-auto FILE Set HFS AutoStart file name
-no-desktop Do not create the HFS (empty) Desktop files
-hide-hfs GLOBFILE Hide HFS file
-hide-hfs-list FILE List of HFS files to hide
-hfs-volid HFS_VOLID Volume name for the HFS partition
-icon-position Keep HFS icon position
-root-info FILE finderinfo for root folder
-input-hfs-charset CHARSET Local input charset for HFS file name conversion
-output-hfs-charset CHARSET Output charset for HFS file name conversion
-hfs-unlock Leave HFS Volume unlocked
-hfs-bless FOLDER_NAME Name of Folder to be blessed
-hfs-parms PARAMETERS Comma separated list of HFS parameters
-prep-boot FILE PReP boot image file -- up to 4 are allowed
-chrp-boot Add CHRP boot header
--cap Look for AUFS CAP Macintosh files
--netatalk Look for NETATALK Macintosh files
--double Look for AppleDouble Macintosh files
--ethershare Look for Helios EtherShare Macintosh files
--exchange Look for PC Exchange Macintosh files
--sgi Look for SGI Macintosh files
--macbin Look for MacBinary Macintosh files
--single Look for AppleSingle Macintosh files
--ushare Look for IPT UShare Macintosh files
--xinet Look for XINET Macintosh files
--dave Look for DAVE Macintosh files
--sfm Look for SFM Macintosh files
--osx-double Look for MacOS X AppleDouble Macintosh files
--osx-hfs Look for MacOS X HFS Macintosh files
Report problems to debburn-devel@lists.alioth.debian.org.
Téma: Brasero howno umí (Přečteno 3468 krát)
