HP scanjet 2200c

[compaq]

Po několika stránkách začne skenovat blbě (viz obr. 3. a 4. strana blbě). Někdy naskenuje dobře jednu, někdy pár... to samé při čb skenování
blbne od instalace u14.04.3

skener je samostatný, ne multi a je připojen USB kabelem
v gscan2pdf skenuje normálně
v U10.04 skenuje normálně
druhý skener skenuje normálně
zapojení do jiného USB portu nepomáhá
restarty všeho nepomohly

díky všem za všechny tipy a rady (K+)

[compaq]

Prosím o rady.

Stejný skener na U10.04 a U12.04 funguje bez problémů... Ponížení balíku v U14.04 na 3.12.1.0 nepomohlo.

simple-scan

** (simple-scan:14368): WARNING **: Couldn't register with accessibility bus: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.

S tímto výpisem skenuje, ale po dvou třech čtyřech stranách se to zmrská...
Při spuštění se sudo nevypíše chybovou hlášku, ale blbne stejně...

Další problém je se skenerem FUJITSU fi-4120c. S U14.04 naskenovanou A4 dole ořízne o 1-1.5cm, takže tam někdy není poslední řádek a zápatí. Nastavení velikosti stránky nepomůže. Opět v U10.04 a U12.04 bez problémů.

Jiný skenovátko Scanner Utility 0.6.2 dělá úplný blbosti... flegita taky... :-(

[compaq]

Výpisů není nikdy dost:

simple-scan -d

** (simple-scan:14938): WARNING **: Couldn't register with accessibility bus: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
[+0,00s] DEBUG: simple-scan.vala:596: Starting Simple Scan 3.12.1, PID=14938
[+0,00s] DEBUG: Connecting to session manager
[+0,15s] DEBUG: ui.vala:1648: Loading state from /home/tomas/.cache/simple-scan/state
[+0,15s] DEBUG: ui.vala:1629: Restoring window to 1206x304 pixels
[+0,15s] DEBUG: autosave-manager.vala:64: Loading autosave information
[+0,15s] DEBUG: autosave-manager.vala:258: Waiting to autosave...
[+0,15s] WARNING: autosave-manager.vala:76: Could not load autosave infomation; not restoring any autosaves
[+0,26s] DEBUG: autosave-manager.vala:280: Autosaving book information
[+0,26s] DEBUG: ui.vala:1739: Saving state to /home/tomas/.cache/simple-scan/state
[+0,26s] DEBUG: scanner.vala:1443: sane_init () -> SANE_STATUS_GOOD
[+0,26s] DEBUG: scanner.vala:1449: SANE version 1.0.23
[+0,26s] DEBUG: scanner.vala:1510: Requesting redetection of scan devices
[+0,26s] DEBUG: scanner.vala:802: Processing request
[+0,41s] DEBUG: ui.vala:1739: Saving state to /home/tomas/.cache/simple-scan/state
[+4,25s] DEBUG: scanner.vala:338: sane_get_devices () -> SANE_STATUS_GOOD
[+4,25s] DEBUG: scanner.vala:350: Device: name="plustek:libusb:004:033" vendor="Hewlett-Packard" model="Scanjet 2200c" type="flatbed scanner"
[+4,25s] DEBUG: scanner.vala:350: Device: name="fujitsu:fi-4120Cdj:22161" vendor="FUJITSU" model="fi-4120Cdj" type="scanner"

Při spuštění skenování:

Processing request
[+65,80s] DEBUG: scanner.vala:863: sane_open ("plustek:libusb:004:033") -> SANE_STATUS_GOOD
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (0)
[+65,80s] DEBUG: scanner.vala:734: Option 0: title='Number of options' type=int size=4 cap=,soft-detect
[+65,80s] DEBUG: scanner.vala:737:   Description: Read-only option that specifies how many options a specific devices supports.
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (1)
[+65,80s] DEBUG: scanner.vala:734: Option 1: name='(null)' title='Scan Mode' type=group size=4
[+65,80s] DEBUG: scanner.vala:737:   Description:
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (2)
[+65,80s] DEBUG: scanner.vala:734: Option 2: name='mode' title='Scan mode' type=string size=8 values=["Lineart", "Gray", "Color"] cap=,soft-select,soft-detect
[+65,80s] DEBUG: scanner.vala:737:   Description: Selects the scan mode (e.g., lineart, monochrome, or color).
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (3)
[+65,80s] DEBUG: scanner.vala:734: Option 3: name='depth' title='Bit depth' type=int size=4 unit=bits values=[8, 14] cap=,soft-select,soft-detect
[+65,80s] DEBUG: scanner.vala:737:   Description: Number of bits per sample, typical values are 1 for "line-art" and 8 for multibit scans.
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (4)
[+65,80s] DEBUG: scanner.vala:734: Option 4: name='source' title='Scan source' type=string size=13 values=["Normal", "Transparency", "Negative"] cap=,soft-select,soft-detect,inactive
[+65,80s] DEBUG: scanner.vala:737:   Description: Selects the scan source (such as a document-feeder).
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (5)
[+65,80s] DEBUG: scanner.vala:734: Option 5: name='resolution' title='Scan resolution' type=int size=4 unit=dpi min=50, max=1200, quant=0 cap=,soft-select,soft-detect
[+65,80s] DEBUG: scanner.vala:737:   Description: Sets the resolution of the scanned image.
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (6)
[+65,80s] DEBUG: scanner.vala:734: Option 6: name='preview' title='Preview' type=bool size=4 cap=,soft-select,soft-detect
[+65,80s] DEBUG: scanner.vala:737:   Description: Request a preview-quality scan.
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (7)
[+65,80s] DEBUG: scanner.vala:734: Option 7: name='(null)' title='Geometry' type=group size=4 cap=,advanced
[+65,80s] DEBUG: scanner.vala:737:   Description:
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (
[+65,80s] DEBUG: scanner.vala:734: Option 8: name='tl-x' title='Top-left x' type=fixed size=4 unit=mm min=0,000000, max=215,000000, quant=0 cap=,soft-select,soft-detect
[+65,80s] DEBUG: scanner.vala:737:   Description: Top-left x position of scan area.
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (9)
[+65,80s] DEBUG: scanner.vala:734: Option 9: name='tl-y' title='Top-left y' type=fixed size=4 unit=mm min=0,000000, max=297,000000, quant=0 cap=,soft-select,soft-detect
[+65,80s] DEBUG: scanner.vala:737:   Description: Top-left y position of scan area.
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (10)
[+65,80s] DEBUG: scanner.vala:734: Option 10: name='br-x' title='Bottom-right x' type=fixed size=4 unit=mm min=0,000000, max=215,000000, quant=0 cap=,soft-select,soft-detect
[+65,80s] DEBUG: scanner.vala:737:   Description: Bottom-right x position of scan area.
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (11)
[+65,80s] DEBUG: scanner.vala:734: Option 11: name='br-y' title='Bottom-right y' type=fixed size=4 unit=mm min=0,000000, max=297,000000, quant=0 cap=,soft-select,soft-detect
[+65,80s] DEBUG: scanner.vala:737:   Description: Bottom-right y position of scan area.
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (12)
[+65,80s] DEBUG: scanner.vala:734: Option 12: name='(null)' title='Enhancement' type=group size=4
[+65,80s] DEBUG: scanner.vala:737:   Description:
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (13)
[+65,80s] DEBUG: scanner.vala:734: Option 13: name='brightness' title='Brightness' type=fixed size=4 unit=percent min=-100,000000, max=100,000000, quant=65536 cap=,soft-select,soft-detect
[+65,80s] DEBUG: scanner.vala:737:   Description: Controls the brightness of the acquired image.
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (14)
[+65,80s] DEBUG: scanner.vala:734: Option 14: name='contrast' title='Contrast' type=fixed size=4 unit=percent min=-100,000000, max=100,000000, quant=65536 cap=,soft-select,soft-detect
[+65,80s] DEBUG: scanner.vala:737:   Description: Controls the contrast of the acquired image.
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (15)
[+65,80s] DEBUG: scanner.vala:734: Option 15: name='custom-gamma' title='Use custom gamma table' type=bool size=4 cap=,soft-select,soft-detect
[+65,80s] DEBUG: scanner.vala:737:   Description: Determines whether a builtin or a custom gamma-table should be used.
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (16)
[+65,80s] DEBUG: scanner.vala:734: Option 16: name='gamma-table' title='Image intensity' type=int size=16384 min=0, max=255, quant=0 cap=,soft-select,soft-detect,inactive
[+65,80s] DEBUG: scanner.vala:737:   Description: Gamma-correction table.  In color mode this option equally affects the red, green, and blue channels simultaneously (i.e., it is an intensity gamma table).
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (17)
[+65,80s] DEBUG: scanner.vala:734: Option 17: name='red-gamma-table' title='Red intensity' type=int size=16384 min=0, max=255, quant=0 cap=,soft-select,soft-detect,inactive
[+65,80s] DEBUG: scanner.vala:737:   Description: Gamma-correction table for the red band.
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (18)
[+65,80s] DEBUG: scanner.vala:734: Option 18: name='green-gamma-table' title='Green intensity' type=int size=16384 min=0, max=255, quant=0 cap=,soft-select,soft-detect,inactive
[+65,80s] DEBUG: scanner.vala:737:   Description: Gamma-correction table for the green band.
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (19)
[+65,80s] DEBUG: scanner.vala:734: Option 19: name='blue-gamma-table' title='Blue intensity' type=int size=16384 min=0, max=255, quant=0 cap=,soft-select,soft-detect,inactive
[+65,80s] DEBUG: scanner.vala:737:   Description: Gamma-correction table for the blue band.
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (20)
[+65,80s] DEBUG: scanner.vala:734: Option 20: name='(null)' title='Device-Settings' type=group size=4
[+65,80s] DEBUG: scanner.vala:737:   Description:
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (21)
[+65,80s] DEBUG: scanner.vala:734: Option 21: name='lamp-switch' title='Lampswitch' type=bool size=4 cap=,soft-select,soft-detect
[+65,80s] DEBUG: scanner.vala:737:   Description: Manually switching the lamp(s).
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (22)
[+65,80s] DEBUG: scanner.vala:734: Option 22: name='lampoff-time' title='Lampoff-time' type=int size=4 min=0, max=999, quant=1 cap=,soft-select,soft-detect
[+65,80s] DEBUG: scanner.vala:737:   Description: Lampoff-time in seconds.
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (23)
[+65,80s] DEBUG: scanner.vala:734: Option 23: name='lamp-off-at-exit' title='Lamp off at exit' type=bool size=4 cap=,soft-select,soft-detect
[+65,80s] DEBUG: scanner.vala:737:   Description: Turn off lamp when program exits
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (24)
[+65,80s] DEBUG: scanner.vala:734: Option 24: name='warmup-time' title='Warmup-time' type=int size=4 min=-1, max=999, quant=1 cap=,soft-select,soft-detect
[+65,80s] DEBUG: scanner.vala:737:   Description: Warmup-time in seconds.
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (25)
[+65,80s] DEBUG: scanner.vala:734: Option 25: name='lamp-off-during-dcal' title='Lamp off during dark calibration' type=bool size=4 cap=,soft-select,soft-detect,inactive
[+65,80s] DEBUG: scanner.vala:737:   Description: Always switches lamp off when doing dark calibration.
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (26)
[+65,80s] DEBUG: scanner.vala:734: Option 26: name='calibration-cache' title='Calibration data cache' type=bool size=4 cap=,soft-select,soft-detect
[+65,80s] DEBUG: scanner.vala:737:   Description: Enables or disables calibration data cache.
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (27)
[+65,80s] DEBUG: scanner.vala:734: Option 27: name='speedup-switch' title='Speedup sensor' type=bool size=4 cap=,soft-select,soft-detect
[+65,80s] DEBUG: scanner.vala:737:   Description: Enables or disables speeding up sensor movement.
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (28)
[+65,80s] DEBUG: scanner.vala:734: Option 28: name='calibrate' title='Calibrate' type=button size=4 cap=,soft-select,soft-detect,automatic,inactive
[+65,80s] DEBUG: scanner.vala:737:   Description: Performs calibration
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (29)
[+65,80s] DEBUG: scanner.vala:734: Option 29: name='(null)' title='Analog frontend' type=group size=4 cap=,advanced
[+65,80s] DEBUG: scanner.vala:737:   Description:
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (30)
[+65,80s] DEBUG: scanner.vala:734: Option 30: name='red-gain' title='Red gain' type=int size=4 min=-1, max=63, quant=1 cap=,soft-select,soft-detect
[+65,80s] DEBUG: scanner.vala:737:   Description: Red gain value of the AFE
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (31)
[+65,80s] DEBUG: scanner.vala:734: Option 31: name='green-gain' title='Green gain' type=int size=4 min=-1, max=63, quant=1 cap=,soft-select,soft-detect
[+65,80s] DEBUG: scanner.vala:737:   Description: Green gain value of the AFE
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (32)
[+65,80s] DEBUG: scanner.vala:734: Option 32: name='blue-gain' title='Blue gain' type=int size=4 min=-1, max=63, quant=1 cap=,soft-select,soft-detect
[+65,80s] DEBUG: scanner.vala:737:   Description: Blue gain value of the AFE
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (33)
[+65,80s] DEBUG: scanner.vala:734: Option 33: name='red-offset' title='Red offset' type=int size=4 min=-1, max=63, quant=1 cap=,soft-select,soft-detect
[+65,80s] DEBUG: scanner.vala:737:   Description: Red offset value of the AFE
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (34)
[+65,80s] DEBUG: scanner.vala:734: Option 34: name='green-offset' title='Green offset' type=int size=4 min=-1, max=63, quant=1 cap=,soft-select,soft-detect
[+65,80s] DEBUG: scanner.vala:737:   Description: Green offset value of the AFE
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (35)
[+65,80s] DEBUG: scanner.vala:734: Option 35: name='blue-offset' title='Blue offset' type=int size=4 min=-1, max=63, quant=1 cap=,soft-select,soft-detect
[+65,80s] DEBUG: scanner.vala:737:   Description: Blue offset value of the AFE
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (36)
[+65,80s] DEBUG: scanner.vala:734: Option 36: name='redlamp-off' title='Red lamp off' type=int size=4 min=-1, max=16363, quant=1 cap=,soft-select,soft-detect,inactive
[+65,80s] DEBUG: scanner.vala:737:   Description: Defines red lamp off parameter
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (37)
[+65,80s] DEBUG: scanner.vala:734: Option 37: name='greenlamp-off' title='Green lamp off' type=int size=4 min=-1, max=16363, quant=1 cap=,soft-select,soft-detect,inactive
[+65,80s] DEBUG: scanner.vala:737:   Description: Defines green lamp off parameter
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (38)
[+65,80s] DEBUG: scanner.vala:734: Option 38: name='bluelamp-off' title='Blue lamp off' type=int size=4 min=-1, max=16363, quant=1 cap=,soft-select,soft-detect,inactive
[+65,80s] DEBUG: scanner.vala:737:   Description: Defines blue lamp off parameter
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (39)
[+65,80s] DEBUG: scanner.vala:734: Option 39: name='(null)' title='Buttons' type=group size=4 cap=,advanced
[+65,80s] DEBUG: scanner.vala:737:   Description:
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (40)
[+65,80s] DEBUG: scanner.vala:734: Option 40: name='button 0' title='Scanner button 0' type=bool size=4 cap=,hard-select,soft-detect,advanced
[+65,80s] DEBUG: scanner.vala:737:   Description: This option reflects the status of the scanner buttons.
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (41)
[+65,80s] DEBUG: scanner.vala:734: Option 41: name='button 1' title='Scanner button 1' type=bool size=4 cap=,hard-select,soft-detect,advanced
[+65,80s] DEBUG: scanner.vala:737:   Description: This option reflects the status of the scanner buttons.
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (42)
[+65,80s] DEBUG: scanner.vala:734: Option 42: name='button 2' title='Scanner button 2' type=bool size=4 cap=,hard-select,soft-detect,inactive,advanced
[+65,80s] DEBUG: scanner.vala:737:   Description: This option reflects the status of the scanner buttons.
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (43)
[+65,80s] DEBUG: scanner.vala:734: Option 43: name='button 3' title='Scanner button 3' type=bool size=4 cap=,hard-select,soft-detect,inactive,advanced
[+65,80s] DEBUG: scanner.vala:737:   Description: This option reflects the status of the scanner buttons.
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (44)
[+65,80s] DEBUG: scanner.vala:734: Option 44: name='button 4' title='Scanner button 4' type=bool size=4 cap=,hard-select,soft-detect,inactive,advanced
[+65,80s] DEBUG: scanner.vala:737:   Description: This option reflects the status of the scanner buttons.
[+65,80s] DEBUG: scanner.vala:884: sane_get_option_descriptor (45)
[+65,80s] DEBUG: scanner.vala:895: SCAN_SOURCE not available, trying alternative "doc-source"
[+65,80s] DEBUG: scanner.vala:546: sane_control_option (2, SANE_ACTION_SET_VALUE, "Color") -> (SANE_STATUS_GOOD, "Color")
[+65,80s] DEBUG: scanner.vala:462: sane_control_option (5, SANE_ACTION_SET_VALUE, 150) -> (SANE_STATUS_GOOD, 150)
[+65,80s] DEBUG: scanner.vala:462: sane_control_option (3, SANE_ACTION_SET_VALUE, -> (SANE_STATUS_GOOD,
[+65,80s] DEBUG: scanner.vala:502: sane_control_option (10, SANE_ACTION_SET_VALUE, 210,000000) -> (SANE_STATUS_GOOD, 210,000000)
[+65,80s] DEBUG: scanner.vala:502: sane_control_option (11, SANE_ACTION_SET_VALUE, 297,000000) -> (SANE_STATUS_GOOD, 297,000000)
[+65,82s] DEBUG: scanner.vala:1209: sane_start (page=0, pass=0) -> SANE_STATUS_GOOD
[+65,82s] DEBUG: scanner.vala:1226: sane_get_parameters () -> SANE_STATUS_GOOD
[+65,82s] DEBUG: scanner.vala:1238: Parameters: format=SANE_FRAME_RGB last_frame=SANE_TRUE bytes_per_line=3720 pixels_per_line=1240 lines=1753 depth=8
[+65,82s] DEBUG: simple-scan.vala:254: Page is 1240 pixels wide, 1753 pixels high, 8 bits per pixel
[+65,85s] DEBUG: simple-scan.vala:188: Getting color profile for device plustek:libusb:004:033
[+65,87s] DEBUG: simple-scan.vala:208: Unable to find colord device plustek:libusb:004:033: property match 'Serial'='sane:plustek:libusb:004:033' does not exist
[+65,95s] DEBUG: ui.vala:1739: Saving state to /home/tomas/.cache/simple-scan/state

Konec skenování (poslední část):

[+129,56s] DEBUG: scanner.vala:1310: sane_read (55801) -> (SANE_STATUS_GOOD, 7440)
[+129,56s] DEBUG: scanner.vala:1310: sane_read (55801) -> (SANE_STATUS_GOOD, 7440)
[+129,56s] DEBUG: scanner.vala:1310: sane_read (55801) -> (SANE_STATUS_GOOD, 11160)
[+129,56s] DEBUG: scanner.vala:1310: sane_read (55801) -> (SANE_STATUS_GOOD, 7440)
[+129,56s] DEBUG: scanner.vala:1310: sane_read (55801) -> (SANE_STATUS_GOOD, 7440)
[+129,56s] DEBUG: scanner.vala:1310: sane_read (55801) -> (SANE_STATUS_GOOD, 3720)
[+130,04s] DEBUG: scanner.vala:1310: sane_read (55801) -> (SANE_STATUS_EOF, 0)
[+130,04s] DEBUG: scanner.vala:1182: sane_cancel ()
[+130,04s] DEBUG: autosave-manager.vala:348: Autosaving page pixels to /home/tomas/.cache/simple-scan/autosaves/15969840.pixels
[+130,06s] DEBUG: autosave-manager.vala:280: Autosaving book information
[+130,07s] DEBUG: autosave-manager.vala:297: Autosaving page page-0
[+223,56s] DEBUG: autosave-manager.vala:194: Deleting autosave records
[+223,57s] DEBUG: scanner.vala:1583: Stopping scan thread
[+223,57s] DEBUG: scanner.vala:802: Processing request
[+223,57s] DEBUG: scanner.vala:764: sane_cancel ()
[+223,57s] DEBUG: scanner.vala:767: sane_close ()
[+223,59s] DEBUG: scanner.vala:1594: sane_exit (

[compaq]

nikdo neskenuje?

Odesláno z mého HM NOTE 1W pomocí Tapatalk