Přestalo fungovat bluetooth

[Abby]

Ahojky, potřebovala bych poradit. Přestalo mi fungovat bluetooth, systém (Linux Mint 17.3 KDE) tvrdí, že není nainstalovaný žádný HW. Ale ve Windows 10 to normálně funguje (posílání souborů, sdílení internetu). Co s tím prosím?

[Cuore]

nějaký výpis? třeba

Kód: [Vybrat]

rfkill list

[Abby]

rfkill list
0: phy0: Wireless LAN
        Soft blocked: no
        Hard blocked: no

[Jakub Vaněk]

Bluetooth tam není. To znamená, že jádro nemá načtený ovladač. Co to je za hardware?

[Abby]

Jak to zjistím? Pomohlo by výpis ze správce zařízení ve windows?

[martyj]

Jak to zjistím? Pomohlo by výpis ze správce zařízení ve windows?

Kód: [Vybrat]

sudo lshw

[Abby]

To mi vypsalo tohle:

Kód: [Vybrat]

abby-v130                 
    description: Portable Computer
    product: Vostro V130 (To be filled by O.E.M.)
    vendor: Dell Inc.
    version: A07
    serial: 5H3JHP1
    width: 64 bits
    capabilities: smbios-2.6 dmi-2.6 vsyscall32
    configuration: boot=normal chassis=portable sku=To be filled by O.E.M. uuid=44454C4C-4800-1033-804A-B5C04F485031
  *-core
       description: Motherboard
       product: 0KHTJH
       vendor: Dell Inc.
       physical id: 0
       version: A07
       serial: .5H3JHP1.CN7016616H00MD.
       slot: To Be Filled By O.E.M.
     *-cpu
          description: CPU
          product: Intel(R) Core(TM) i3 CPU       U 380  @ 1.33GHz
          vendor: Intel Corp.
          physical id: 4
          bus info: cpu@0
          version: Intel(R) Core(TM) i3 CPU       U 380  @ 1.33GH
          serial: To Be Filled By O.E.M.
          slot: CPU 1
          size: 1330MHz
          capacity: 1330MHz
          width: 64 bits
          clock: 533MHz
          capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt lahf_lm arat dtherm tpr_shadow vnmi flexpriority ept vpid cpufreq
          configuration: cores=2 enabledcores=1 threads=2
        *-cache:0
             description: L1 cache
             physical id: 5
             slot: L1-Cache
             size: 64KiB
             capacity: 64KiB
             capabilities: internal write-back unified
        *-cache:1
             description: L2 cache
             physical id: 6
             slot: L2-Cache
             size: 512KiB
             capacity: 512KiB
             capabilities: internal varies unified
        *-cache:2
             description: L3 cache
             physical id: 7
             slot: L3-Cache
             size: 3MiB
             capacity: 3MiB
             capabilities: internal varies unified
     *-memory:0 UNCLAIMED
          physical id: 1
        *-bank UNCLAIMED
             description: SODIMM DDR3 Synchronous 1333 MHz (0,8 ns)
             product: NT4GC64B8HB0NS-CG
             vendor: Undefined
             physical id: 0
             serial: 78400941
             slot: DIMM_A
             size: 4GiB
             width: 64 bits
             clock: 1333MHz (0.8ns)
     *-memory:1
          description: System Memory
          physical id: 1c
          slot: System board or motherboard
     *-firmware
          description: BIOS
          vendor: Dell Inc.
          physical id: 0
          version: A07
          date: 05/28/2014
          size: 64KiB
          capacity: 1984KiB
          capabilities: mca pci upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb zipboot biosbootspecification
     *-memory:2 UNCLAIMED
          physical id: 2
     *-memory:3 UNCLAIMED
          physical id: 3
     *-pci:0
          description: Host bridge
          product: Core Processor QuickPath Architecture Generic Non-core Registers
          vendor: Intel Corporation
          physical id: 100
          bus info: pci@0000:ff:00.0
          version: 05
          width: 32 bits
          clock: 33MHz
     *-pci:1
          description: Host bridge
          product: Core Processor QuickPath Architecture System Address Decoder
          vendor: Intel Corporation
          physical id: 101
          bus info: pci@0000:ff:00.1
          version: 05
          width: 32 bits
          clock: 33MHz
     *-pci:2
          description: Host bridge
          product: Core Processor QPI Link 0
          vendor: Intel Corporation
          physical id: 102
          bus info: pci@0000:ff:02.0
          version: 05
          width: 32 bits
          clock: 33MHz
     *-pci:3
          description: Host bridge
          product: 1st Generation Core i3/5/7 Processor QPI Physical 0
          vendor: Intel Corporation
          physical id: 103
          bus info: pci@0000:ff:02.1
          version: 05
          width: 32 bits
          clock: 33MHz
     *-pci:4
          description: Host bridge
          product: 1st Generation Core i3/5/7 Processor Reserved
          vendor: Intel Corporation
          physical id: 104
          bus info: pci@0000:ff:02.2
          version: 05
          width: 32 bits
          clock: 33MHz
     *-pci:5
          description: Host bridge
          product: 1st Generation Core i3/5/7 Processor Reserved
          vendor: Intel Corporation
          physical id: 105
          bus info: pci@0000:ff:02.3
          version: 05
          width: 32 bits
          clock: 33MHz
     *-pci:6
          description: Host bridge
          product: Core Processor DRAM Controller
          vendor: Intel Corporation
          physical id: 106
          bus info: pci@0000:00:00.0
          version: 18
          width: 32 bits
          clock: 33MHz
          configuration: driver=agpgart-intel
          resources: irq:0
        *-display
             description: VGA compatible controller
             product: Core Processor Integrated Graphics Controller
             vendor: Intel Corporation
             physical id: 2
             bus info: pci@0000:00:02.0
             version: 18
             width: 64 bits
             clock: 33MHz
             capabilities: msi pm vga_controller bus_master cap_list rom
             configuration: driver=i915 latency=0
             resources: irq:30 memory:fe000000-fe3fffff memory:c0000000-cfffffff ioport:f080(size=8)
        *-usb:0
             description: USB controller
             product: 5 Series/3400 Series Chipset USB2 Enhanced Host Controller
             vendor: Intel Corporation
             physical id: 1a
             bus info: pci@0000:00:1a.0
             version: 06
             width: 32 bits
             clock: 33MHz
             capabilities: pm debug ehci bus_master cap_list
             configuration: driver=ehci-pci latency=0
             resources: irq:16 memory:fe508000-fe5083ff
        *-multimedia
             description: Audio device
             product: 5 Series/3400 Series Chipset High Definition Audio
             vendor: Intel Corporation
             physical id: 1b
             bus info: pci@0000:00:1b.0
             version: 06
             width: 64 bits
             clock: 33MHz
             capabilities: pm msi pciexpress bus_master cap_list
             configuration: driver=snd_hda_intel latency=0
             resources: irq:32 memory:fe500000-fe503fff
        *-pci:0
             description: PCI bridge
             product: 5 Series/3400 Series Chipset PCI Express Root Port 1
             vendor: Intel Corporation
             physical id: 1c
             bus info: pci@0000:00:1c.0
             version: 06
             width: 32 bits
             clock: 33MHz
             capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             resources: irq:24 ioport:2000(size=4096) memory:d0100000-d02fffff ioport:d0300000(size=2097152)
        *-pci:1
             description: PCI bridge
             product: 5 Series/3400 Series Chipset PCI Express Root Port 2
             vendor: Intel Corporation
             physical id: 1c.1
             bus info: pci@0000:00:1c.1
             version: 06
             width: 32 bits
             clock: 33MHz
             capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             resources: irq:25 ioport:3000(size=4096) memory:fe400000-fe4fffff ioport:d0500000(size=2097152)
           *-network
                description: Wireless interface
                product: AR9285 Wireless Network Adapter (PCI-Express)
                vendor: Qualcomm Atheros
                physical id: 0
                bus info: pci@0000:12:00.0
                logical name: wlan0
                version: 01
                serial: cc:af:78:84:01:c5
                width: 64 bits
                clock: 33MHz
                capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
                configuration: broadcast=yes driver=ath9k driverversion=3.19.0-32-generic firmware=N/A ip=192.168.0.12 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn
                resources: irq:17 memory:fe400000-fe40ffff
        *-pci:2
             description: PCI bridge
             product: 5 Series/3400 Series Chipset PCI Express Root Port 3
             vendor: Intel Corporation
             physical id: 1c.2
             bus info: pci@0000:00:1c.2
             version: 06
             width: 32 bits
             clock: 33MHz
             capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             resources: irq:26 ioport:e000(size=4096) memory:d0700000-d0afffff ioport:d0000000(size=1048576)
           *-network
                description: Ethernet interface
                product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
                vendor: Realtek Semiconductor Co., Ltd.
                physical id: 0
                bus info: pci@0000:13:00.0
                logical name: eth0
                version: 06
                serial: 18:03:73:59:96:94
                size: 10Mbit/s
                capacity: 1Gbit/s
                width: 64 bits
                clock: 33MHz
                capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
                configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8168e-2.fw latency=0 link=no multicast=yes port=MII speed=10Mbit/s
                resources: irq:28 ioport:e000(size=256) memory:d0004000-d0004fff memory:d0000000-d0003fff
        *-pci:3
             description: PCI bridge
             product: 5 Series/3400 Series Chipset PCI Express Root Port 5
             vendor: Intel Corporation
             physical id: 1c.4
             bus info: pci@0000:00:1c.4
             version: 06
             width: 32 bits
             clock: 33MHz
             capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             resources: irq:27 ioport:4000(size=4096) memory:d0b00000-d0cfffff ioport:d0d00000(size=2097152)
        *-usb:1
             description: USB controller
             product: 5 Series/3400 Series Chipset USB2 Enhanced Host Controller
             vendor: Intel Corporation
             physical id: 1d
             bus info: pci@0000:00:1d.0
             version: 06
             width: 32 bits
             clock: 33MHz
             capabilities: pm debug ehci bus_master cap_list
             configuration: driver=ehci-pci latency=0
             resources: irq:23 memory:fe507000-fe5073ff
        *-pci:4
             description: PCI bridge
             product: 82801 Mobile PCI Bridge
             vendor: Intel Corporation
             physical id: 1e
             bus info: pci@0000:00:1e.0
             version: a6
             width: 32 bits
             clock: 33MHz
             capabilities: pci subtractive_decode bus_master cap_list
        *-isa
             description: ISA bridge
             product: HM57 Chipset LPC Interface Controller
             vendor: Intel Corporation
             physical id: 1f
             bus info: pci@0000:00:1f.0
             version: 06
             width: 32 bits
             clock: 33MHz
             capabilities: isa bus_master cap_list
             configuration: driver=lpc_ich latency=0
             resources: irq:0
        *-storage
             description: SATA controller
             product: 5 Series/3400 Series Chipset 6 port SATA AHCI Controller
             vendor: Intel Corporation
             physical id: 1f.2
             bus info: pci@0000:00:1f.2
             version: 06
             width: 32 bits
             clock: 66MHz
             capabilities: storage msi pm ahci_1.0 bus_master cap_list
             configuration: driver=ahci latency=0
             resources: irq:29 ioport:f070(size=8) ioport:f060(size=4) ioport:f050(size=8) ioport:f040(size=4) ioport:f020(size=32) memory:fe506000-fe5067ff
        *-serial UNCLAIMED
             description: SMBus
             product: 5 Series/3400 Series Chipset SMBus Controller
             vendor: Intel Corporation
             physical id: 1f.3
             bus info: pci@0000:00:1f.3
             version: 06
             width: 64 bits
             clock: 33MHz
             configuration: latency=0
             resources: memory:fe505000-fe5050ff ioport:f000(size=32)
        *-generic
             description: Signal processing controller
             product: 5 Series/3400 Series Chipset Thermal Subsystem
             vendor: Intel Corporation
             physical id: 1f.6
             bus info: pci@0000:00:1f.6
             version: 06
             width: 64 bits
             clock: 33MHz
             capabilities: pm msi bus_master cap_list
             configuration: driver=intel ips latency=0
             resources: irq:18 memory:fe504000-fe504fff
        *-communication
             description: Communication controller
             product: 5 Series/3400 Series Chipset HECI Controller
             vendor: Intel Corporation
             physical id: 16
             bus info: pci@0000:00:16.0
             version: 06
             width: 64 bits
             clock: 33MHz
             capabilities: pm msi bus_master cap_list
             configuration: driver=mei_me latency=0
             resources: irq:31 memory:fe509000-fe50900f
     *-scsi
          physical id: 5
          logical name: scsi0
          capabilities: emulated
        *-disk
             description: ATA Disk
             product: OCZ-ARC100
             physical id: 0.0.0
             bus info: scsi@0:0.0.0
             logical name: /dev/sda
             version: 1.01
             serial: A22L1061531004865
             size: 223GiB (240GB)
             capabilities: partitioned partitioned:dos
             configuration: ansiversion=5 sectorsize=512 signature=6ec7ec13
           *-volume:0
                description: Windows NTFS volume
                physical id: 1
                bus info: scsi@0:0.0.0,1
                logical name: /dev/sda1
                version: 3.1
                serial: b615-c948
                size: 498MiB
                capacity: 500MiB
                capabilities: primary bootable ntfs initialized
                configuration: clustersize=4096 created=2016-03-14 00:21:34 filesystem=ntfs label=Rezervováno systémem modified_by_chkdsk=true mounted_on_nt4=true resize_log_file=true state=dirty upgrade_on_mount=true
           *-volume:1
                description: Windows NTFS volume
                physical id: 2
                bus info: scsi@0:0.0.0,2
                logical name: /dev/sda2
                version: 3.1
                serial: b22b577b-96aa-034c-afe3-302985bb52ee
                size: 185GiB
                capacity: 190GiB
                capabilities: primary ntfs initialized
                configuration: clustersize=4096 created=2016-03-14 00:22:29 filesystem=ntfs state=clean
           *-volume:2
                description: Extended partition
                physical id: 3
                bus info: scsi@0:0.0.0,3
                logical name: /dev/sda3
                size: 33GiB
                capacity: 33GiB
                capabilities: primary extended partitioned partitioned:extended
              *-logicalvolume:0
                   description: Linux swap / Solaris partition
                   physical id: 5
                   logical name: /dev/sda5
                   capacity: 2046MiB
                   capabilities: nofs
              *-logicalvolume:1
                   description: Linux filesystem partition
                   physical id: 6
                   logical name: /dev/sda6
                   logical name: /
                   capacity: 10235MiB
                   configuration: mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered state=mounted
              *-logicalvolume:2
                   description: Linux filesystem partition
                   physical id: 7
                   logical name: /dev/sda7
                   logical name: /home
                   capacity: 21GiB
                   configuration: mount.fstype=ext4 mount.options=rw,relatime,data=ordered state=mounted
  *-battery
       description: Lithium Ion Battery
       product: DELL 449TX16
       vendor: Sanyo
       physical id: 1
       version: 10/31/2006
       serial: 66
       slot: Sys. Battery Bay
       capacity: 27000mWh
       configuration: voltage=11,1V

[Abby]

Zkusila jsem v Nastavení vypnout a zapnout "Povolit integraci Bluetooth" a najednou to funguje. Máte někdo tušení, v čem mohl být problém?

[voltaren]

Zkusila jsem v Nastavení vypnout a zapnout "Povolit integraci Bluetooth" a najednou to funguje. Máte někdo tušení, v čem mohl být problém?

HW..

[Abby]

To znamená co?

[Cuore]

Jelikož bluetooth není v žádném výpisu, tak muselo být blokované na úrovni Biosu. Párkrát jsem to viděl, že windows vypínal zařízení přímo v biosu (obdoba když si vypneš, třeba integrovanou grafiku, síť apod.). Pak je v systému nedetekovatelné.

[Abby]

Nj, ale ještě asi před týdnem to normálně fungovalo. Když teď nabootuji jakékoliv live distro (zkoušela jsem Ubuntu 14.04 a 15.10, Linux Mint KDE a Cinnamon 17.3 a Elementary OS Freya), bluetooth funguje, ve Windows funguje, v biosu je povolené. Prostě to přestalo fungovat po nějaké aktualizaci, ale netuším proč. Jinak ten notebook je Dell Vostro V130, nemá UEFI, ale obyčejný starý BIOS, tam Windows přece sáhnout nemůžou, nebo ano?

[Cuore]

A před tím si Live testovala?

[Abby]

Ovšem že ne, nebyl k tomu důvod, když všechno normálně fungovalo.

[voltaren]

To znamená co?

To znamená to, že občas sa stávajú veci, ktoré sa nedajú "reálne" vysvetliť. Pokiaľ ti to znovu ide, tak je všetko OK.

[Cuore]

Ovšem že ne, nebyl k tomu důvod, když všechno normálně fungovalo.

když ti nešlo bluetooth, tak nebyl důvod? a po rozběhání důvod byl?

Když teď nabootuji jakékoliv live distro (zkoušela jsem Ubuntu 14.04 a 15.10, Linux Mint KDE a Cinnamon 17.3 a Elementary OS Freya), bluetooth funguje, ve Windows funguje, v biosu je povolené.

[Abby]

Cuore: ano, přesně tak. Nemám potřebu spuštět live distra a zkoušet, jestli funguje bluetooth nebo cokoliv jiného. Počítač používám a je mi jedno, co dělá, když funguje. Zkusila jsem to až když to nešlo a zjistila jsem, že HW problém to není (což je jasné už z toho, že ve Windows to normálně funguje).

[Cuore]

Ujasníme si jednu věc protože jsem se v tom zamotal. Současná situace je tedy jaká? Bluetooth ti jede nebo ne?

[Abby]

Současná situace je taková, že bluetooth jede až do restartu. Po restartu se opět nehlásí a je nutné opakovat postup výše (vypnout a zapnout integraci bluetooth). Ve Windows 10 funguje bez problémů a po jakémkoliv startu jakéhokoliv live CD/DVD také funguje. Zkusila jsem i čistou instalaci Mintu bez aktualizací, bluetooth normálně fungovalo. Poté jsem nechala systém aktualizovat a po restartu se situace opakuje, bluetooth nefunguje dokud neprovedu vypnutí a zapnutí integrace. Takže je tam někde nějaká aktualizace, která to rozbila.


edit: ještě doplnění. Zkusila jsem také nainstalovat Open SUSE 42.1 Leap a tam bluetooth nefungovalo od začátku, ale výše zmíněný postup ho zprovoznil. Open SUSE má Plasmu 5 a jádro 4 a něco, takže to vypadá, že bude asi nějaká chyba přímo v jádře, protože starší distribuce fungují bez problémů, novější ne. Do Mintu jsem nainstalovala i jádro 4.5 a problém přetrvává. Teď je otázka, dá se to nějak vyřešit? Pro mě je totiž funkční bluetooth dost kritické, používám ho často a posledních pár dnů mám radši spuštěné widle, kde to funguje korektně a musím říct, že je to dost děs...

[Jakub Vaněk]

Pošli sem prosím výstup příkazu dmesg, třeba tam bude něco zajímavého.

[Abby]

Kód: [Vybrat]

[    0.000000] microcode: CPU0 microcode updated early to revision 0x4, date = 2013-06-28
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.1.15-8-default (geeko@buildhost) (gcc version 4.8.5 (SUSE Linux) ) #1 SMP PREEMPT Wed Jan 20 16:41:00 UTC 2016 (0e3b3ab)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.1.15-8-default root=UUID=f9dfa308-8b97-4d6f-8a41-d3d8aa88fb5d splash=silent quiet showopts
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bb57afff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb57b000-0x00000000bb5c2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bb5c3000-0x00000000bb5cdfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bb5ce000-0x00000000bb5d0fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bb5d1000-0x00000000bb5f4fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bb5f5000-0x00000000bb5f5fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb5f6000-0x00000000bb5fdfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bb5fe000-0x00000000bb600fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bb601000-0x00000000bb605fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bb606000-0x00000000bb655fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bb656000-0x00000000bb698fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bb699000-0x00000000bb7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bde00000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000137ffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Dell Inc. Vostro V130/0KHTJH, BIOS A07   05/28/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x138000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 100000000 mask FC0000000 write-back
[    0.000000]   2 base 0BC000000 mask FFC000000 uncachable
[    0.000000]   3 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   4 base 138000000 mask FF8000000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC 
[    0.000000] e820: update [mem 0xbc000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xbb800 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fcda0-0x000fcdaf] mapped at [ffff8800000fcda0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x0221a000, 0x0221afff] PGTABLE
[    0.000000] BRK [0x0221b000, 0x0221bfff] PGTABLE
[    0.000000] BRK [0x0221c000, 0x0221cfff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x137e00000-0x137ffffff]
[    0.000000]  [mem 0x137e00000-0x137ffffff] page 2M
[    0.000000] BRK [0x0221d000, 0x0221dfff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x120000000-0x137dfffff]
[    0.000000]  [mem 0x120000000-0x137dfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x11fffffff]
[    0.000000]  [mem 0x100000000-0x11fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbb57afff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0xbb3fffff] page 2M
[    0.000000]  [mem 0xbb400000-0xbb57afff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbb5f5000-0xbb5f5fff]
[    0.000000]  [mem 0xbb5f5000-0xbb5f5fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbb699000-0xbb7fffff]
[    0.000000]  [mem 0xbb699000-0xbb7fffff] page 4k
[    0.000000] BRK [0x0221e000, 0x0221efff] PGTABLE
[    0.000000] RAMDISK: [mem 0x369a2000-0x374c8fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0410 000024 (v03 DELL  )
[    0.000000] ACPI: XSDT 0x00000000BB5C3080 000054 (v01 DELL   WN09     01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000BB5CCF88 0000F4 (v04 DELL   WN09     01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000BB5C3168 009E1A (v02 DELL   WN09     00000013 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000BB601F40 000040
[    0.000000] ACPI: FACS 0x00000000BB601F80 000040
[    0.000000] ACPI: APIC 0x00000000BB5CD080 000072 (v01 DELL   WN09     01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000BB5CD0F8 00014E (v01 AMICPU PROC     00000001 MSFT 03000001)
[    0.000000] ACPI: MCFG 0x00000000BB5CD248 00003C (v01 DELL   WN09     01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000BB5CD288 000038 (v01 DELL   WN09     01072009 AMI. 00000003)
[    0.000000] ACPI: OSFR 0x00000000BB5CD2C0 000086 (v01 DELL   M08      07DE051C ASL  00000061)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x0000000137ffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x137fe9000-0x137ffcfff]
[    0.000000]  [ffffea0000000000-ffffea0004dfffff] PMD -> [ffff880133800000-ffff8801375fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x0000000137ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bb57afff]
[    0.000000]   node   0: [mem 0x00000000bb5f5000-0x00000000bb5f5fff]
[    0.000000]   node   0: [mem 0x00000000bb699000-0x00000000bb7fffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x0000000137ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000137ffffff]
[    0.000000] On node 0 totalpages: 996991
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11932 pages used for memmap
[    0.000000]   DMA32 zone: 763619 pages, LIFO batch:31
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 229376 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0xbe000000-0xbfffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb57b000-0xbb5c2fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb5c3000-0xbb5cdfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb5ce000-0xbb5d0fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb5d1000-0xbb5f4fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb5f6000-0xbb5fdfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb5fe000-0xbb600fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb601000-0xbb605fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb606000-0xbb655fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb656000-0xbb698fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb800000-0xbddfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbde00000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff880137c00000 s97368 r8192 d29608 u524288
[    0.000000] pcpu-alloc: s97368 r8192 d29608 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 981390
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.1.15-8-default root=UUID=f9dfa308-8b97-4d6f-8a41-d3d8aa88fb5d splash=silent quiet showopts
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Memory: 3827488K/3987964K available (6547K kernel code, 1084K rwdata, 4848K rodata, 1560K init, 1516K bss, 160476K reserved, 0K cma-reserved)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:456 16
[    0.000000]  Offload RCU callbacks from all CPUs
[    0.000000]  Offload RCU callbacks from CPUs: 0-3.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1329.942 MHz processor
[    0.000060] Calibrating delay loop (skipped), value calculated using timer frequency.. 2659.88 BogoMIPS (lpj=5319768)
[    0.000065] pid_max: default: 32768 minimum: 301
[    0.000079] ACPI: Core revision 20150410
[    0.025348] ACPI: All ACPI Tables successfully acquired
[    0.025407] Security Framework initialized
[    0.025438] AppArmor: AppArmor initialized
[    0.026074] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.027968] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.028780] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.028795] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.029252] Initializing cgroup subsys blkio
[    0.029260] Initializing cgroup subsys memory
[    0.029280] Initializing cgroup subsys devices
[    0.029286] Initializing cgroup subsys freezer
[    0.029291] Initializing cgroup subsys net_cls
[    0.029298] Initializing cgroup subsys perf_event
[    0.029304] Initializing cgroup subsys net_prio
[    0.029310] Initializing cgroup subsys hugetlb
[    0.029348] CPU: Physical Processor ID: 0
[    0.029350] CPU: Processor Core ID: 0
[    0.029359] mce: CPU supports 9 MCE banks
[    0.029380] CPU0: Thermal monitoring enabled (TM1)
[    0.029393] process: using mwait in idle threads
[    0.029400] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[    0.029402] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.030002] Freeing SMP alternatives memory: 24K (ffffffff82097000 - ffffffff8209d000)
[    0.042322] ftrace: allocating 25000 entries in 98 pages
[    0.066360] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.211511] smpboot: CPU0: Intel(R) Core(TM) i3 CPU       U 380  @ 1.33GHz (fam: 06, model: 25, stepping: 05)
[    0.211560] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[    0.211595] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[    0.211600] ... version:                3
[    0.211602] ... bit width:              48
[    0.211604] ... generic registers:      4
[    0.211606] ... value mask:             0000ffffffffffff
[    0.211608] ... max period:             000000007fffffff
[    0.211610] ... fixed-purpose events:   3
[    0.211612] ... event mask:             000000070000000f
[    0.243701] x86: Booting SMP configuration:
[    0.243705] .... node  #0, CPUs:      #1
[    0.255101] microcode: CPU1 microcode updated early to revision 0x4, date = 2013-06-28
[    0.257396] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.263715]  #2 #3
[    0.296888] x86: Booted up 1 node, 4 CPUs
[    0.296895] smpboot: Total of 4 processors activated (10639.53 BogoMIPS)
[    0.300241] devtmpfs: initialized
[    0.305432] PM: Registering ACPI NVS region [mem 0xbb57b000-0xbb5c2fff] (294912 bytes)
[    0.305448] PM: Registering ACPI NVS region [mem 0xbb5ce000-0xbb5d0fff] (12288 bytes)
[    0.305451] PM: Registering ACPI NVS region [mem 0xbb5f6000-0xbb5fdfff] (32768 bytes)
[    0.305454] PM: Registering ACPI NVS region [mem 0xbb601000-0xbb605fff] (20480 bytes)
[    0.305458] PM: Registering ACPI NVS region [mem 0xbb656000-0xbb698fff] (274432 bytes)
[    0.305629] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.305786] pinctrl core: initialized pinctrl subsystem
[    0.305840] RTC time: 14:28:36, date: 04/06/16
[    0.306053] NET: Registered protocol family 16
[    0.307553] cpuidle: using governor ladder
[    0.311543] cpuidle: using governor menu
[    0.311650] ACPI: bus type PCI registered
[    0.311653] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.311790] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.311795] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.312752] PCI: Using configuration type 1 for base access
[    0.316267] ACPI: Added _OSI(Module Device)
[    0.316270] ACPI: Added _OSI(Processor Device)
[    0.316273] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.316275] ACPI: Added _OSI(Processor Aggregator Device)
[    0.321285] ACPI: Executed 1 blocks of module-level executable AML code
[    0.331257] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.335723] ACPI: Dynamic OEM Table Load:
[    0.335735] ACPI: SSDT 0xFFFF880132959400 0003A4 (v01 AMI    IST      00000001 MSFT 03000001)
[    0.338047] ACPI: Interpreter enabled
[    0.338059] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-580)
[    0.338067] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
[    0.338095] ACPI: (supports S0 S3 S4 S5)
[    0.338098] ACPI: Using IOAPIC for interrupt routing
[    0.338170] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.362121] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.362133] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.362595] acpi PNP0A08:00: _OSC: platform does not support [PME]
[    0.363036] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug AER PCIeCapability]
[    0.363548] PCI host bridge to bus 0000:00
[    0.363554] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.363559] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.363562] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.363565] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.363569] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
[    0.363583] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[    0.363619] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[    0.363774] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
[    0.363792] pci 0000:00:02.0: reg 0x10: [mem 0xfe000000-0xfe3fffff 64bit]
[    0.363802] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.363810] pci 0000:00:02.0: reg 0x20: [io  0xf080-0xf087]
[    0.364023] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[    0.364052] pci 0000:00:16.0: reg 0x10: [mem 0xfe509000-0xfe50900f 64bit]
[    0.364151] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.364320] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[    0.364343] pci 0000:00:1a.0: reg 0x10: [mem 0xfe508000-0xfe5083ff]
[    0.364449] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.364616] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[    0.364639] pci 0000:00:1b.0: reg 0x10: [mem 0xfe500000-0xfe503fff 64bit]
[    0.364732] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.364895] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[    0.364983] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.365081] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.365159] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[    0.365246] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.365343] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.365420] pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400
[    0.365508] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.365602] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.365683] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[    0.365771] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.365864] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.365950] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[    0.365974] pci 0000:00:1d.0: reg 0x10: [mem 0xfe507000-0xfe5073ff]
[    0.366080] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.369272] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.369356] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.369520] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.369601] pci 0000:00:1f.0: [8086:3b0b] type 00 class 0x060100
[    0.369874] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
[    0.369900] pci 0000:00:1f.2: reg 0x10: [io  0xf070-0xf077]
[    0.369913] pci 0000:00:1f.2: reg 0x14: [io  0xf060-0xf063]
[    0.369926] pci 0000:00:1f.2: reg 0x18: [io  0xf050-0xf057]
[    0.369939] pci 0000:00:1f.2: reg 0x1c: [io  0xf040-0xf043]
[    0.369952] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
[    0.369964] pci 0000:00:1f.2: reg 0x24: [mem 0xfe506000-0xfe5067ff]
[    0.370033] pci 0000:00:1f.2: PME# supported from D3hot
[    0.370194] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[    0.370214] pci 0000:00:1f.3: reg 0x10: [mem 0xfe505000-0xfe5050ff 64bit]
[    0.370241] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.370420] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[    0.370447] pci 0000:00:1f.6: reg 0x10: [mem 0xfe504000-0xfe504fff 64bit]
[    0.370789] pci 0000:00:1c.0: PCI bridge to [bus 11]

Výpis je z Open SUSE 42.1 Leap, snad to nevadí. A musím to rozdělit na dvakrát, je to moc dlouhé.

[Abby]

Kód: [Vybrat]

[    0.370943] pci 0000:12:00.0: [168c:002b] type 00 class 0x028000
[    0.370978] pci 0000:12:00.0: reg 0x10: [mem 0xfe400000-0xfe40ffff 64bit]
[    0.371133] pci 0000:12:00.0: supports D1
[    0.371137] pci 0000:12:00.0: PME# supported from D0 D1 D3hot
[    0.376839] pci 0000:00:1c.1: PCI bridge to [bus 12]
[    0.376855] pci 0000:00:1c.1:   bridge window [mem 0xfe400000-0xfe4fffff]
[    0.376982] pci 0000:13:00.0: [10ec:8168] type 00 class 0x020000
[    0.377053] pci 0000:13:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.377151] pci 0000:13:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
[    0.377214] pci 0000:13:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
[    0.377508] pci 0000:13:00.0: supports D1 D2
[    0.377511] pci 0000:13:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.377712] pci 0000:00:1c.2: PCI bridge to [bus 13]
[    0.377718] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.377729] pci 0000:00:1c.2:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.377859] pci 0000:00:1c.4: PCI bridge to [bus 15]
[    0.377980] pci 0000:00:1e.0: PCI bridge to [bus 20] (subtractive decode)
[    0.377995] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.377999] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.378002] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.378006] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
[    0.379040] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.379185] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.379327] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.379468] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15)
[    0.379617] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[    0.379761] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[    0.379904] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.380046] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.380458] ACPI: Enabled 5 GPEs in block 00 to 3F
[    0.380623] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.380627] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.380632] vgaarb: loaded
[    0.380634] vgaarb: bridge control possible 0000:00:02.0
[    0.380801] SCSI subsystem initialized
[    0.380902] libata version 3.00 loaded.
[    0.381052] PCI: Using ACPI for IRQ routing
[    0.391344] PCI: Discovered peer bus ff
[    0.391347] PCI: root bus ff: using default resources
[    0.391349] PCI: Probing PCI hardware (bus ff)
[    0.391410] ACPI: \: failed to evaluate _DSM (0x1001)
[    0.391412] PCI host bridge to bus 0000:ff
[    0.391417] pci_bus 0000:ff: root bus resource [io  0x0000-0xffff]
[    0.391420] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
[    0.391423] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
[    0.391428] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[    0.391437] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[    0.391528] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[    0.391616] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[    0.391699] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[    0.391780] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[    0.391863] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[    0.391960] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
[    0.391965] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[    0.391969] PCI: pci_cache_line_size set to 64 bytes
[    0.392049] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    0.392052] e820: reserve RAM buffer [mem 0xbb57b000-0xbbffffff]
[    0.392056] e820: reserve RAM buffer [mem 0xbb5f6000-0xbbffffff]
[    0.392059] e820: reserve RAM buffer [mem 0xbb800000-0xbbffffff]
[    0.392277] NetLabel: Initializing
[    0.392280] NetLabel:  domain hash size = 128
[    0.392281] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.392307] NetLabel:  unlabeled traffic allowed by default
[    0.392361] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.392370] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.394421] Switched to clocksource hpet
[    0.406512] AppArmor: AppArmor Filesystem Enabled
[    0.406634] pnp: PnP ACPI init
[    0.406952] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.406957] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.406961] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.406964] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.406968] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[    0.406976] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.407074] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.407186] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.407191] system 00:02: [mem 0xfe800000-0xfe8001ff] has been reserved
[    0.407197] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.407330] pnp 00:03: Plug and Play ACPI device, IDs DLL049c SYN0600 SYN0002 PNP0f13 (active)
[    0.407408] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.407869] system 00:05: [io  0x0400-0x047f] could not be reserved
[    0.407874] system 00:05: [io  0x1180-0x119f] has been reserved
[    0.407878] system 00:05: [io  0x0500-0x057f] has been reserved
[    0.407883] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.407887] system 00:05: [mem 0xfec00000-0xfecfffff] could not be reserved
[    0.407890] system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved
[    0.407894] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.407899] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.408605] pnp: PnP ACPI: found 6 devices
[    0.416639] clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.416666] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 11] add_size 1000
[    0.416673] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 11] add_size 200000 add_align 100000
[    0.416677] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 11] add_size 200000 add_align 100000
[    0.416690] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 12] add_size 1000
[    0.416694] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 12] add_size 200000 add_align 100000
[    0.416706] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 13] add_size 400000 add_align 100000
[    0.416718] pci 0000:00:1c.4: bridge window [io  0x1000-0x0fff] to [bus 15] add_size 1000
[    0.416722] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 15] add_size 200000 add_align 100000
[    0.416726] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 15] add_size 200000 add_align 100000
[    0.416748] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.416752] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.416756] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.416759] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.416763] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.416767] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.416770] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 400000 min_align 100000
[    0.416774] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x004fffff] res_to_dev_res add_size 400000 min_align 100000
[    0.416777] pci 0000:00:1c.4: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.416781] pci 0000:00:1c.4: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.416784] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.416788] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.416792] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.416795] pci 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.416798] pci 0000:00:1c.1: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.416802] pci 0000:00:1c.1: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.416805] pci 0000:00:1c.4: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.416809] pci 0000:00:1c.4: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.416818] pci 0000:00:1c.0: BAR 14: assigned [mem 0xd0100000-0xd02fffff]
[    0.416826] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd0300000-0xd04fffff 64bit pref]
[    0.416834] pci 0000:00:1c.1: BAR 15: assigned [mem 0xd0500000-0xd06fffff 64bit pref]
[    0.416838] pci 0000:00:1c.2: BAR 14: assigned [mem 0xd0700000-0xd0afffff]
[    0.416841] pci 0000:00:1c.4: BAR 14: assigned [mem 0xd0b00000-0xd0cfffff]
[    0.416848] pci 0000:00:1c.4: BAR 15: assigned [mem 0xd0d00000-0xd0efffff 64bit pref]
[    0.416853] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.416857] pci 0000:00:1c.1: BAR 13: assigned [io  0x3000-0x3fff]
[    0.416861] pci 0000:00:1c.4: BAR 13: assigned [io  0x4000-0x4fff]
[    0.416867] pci 0000:00:1c.0: PCI bridge to [bus 11]
[    0.416872] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.416879] pci 0000:00:1c.0:   bridge window [mem 0xd0100000-0xd02fffff]
[    0.416885] pci 0000:00:1c.0:   bridge window [mem 0xd0300000-0xd04fffff 64bit pref]
[    0.416893] pci 0000:00:1c.1: PCI bridge to [bus 12]
[    0.416897] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.416904] pci 0000:00:1c.1:   bridge window [mem 0xfe400000-0xfe4fffff]
[    0.416910] pci 0000:00:1c.1:   bridge window [mem 0xd0500000-0xd06fffff 64bit pref]
[    0.416918] pci 0000:00:1c.2: PCI bridge to [bus 13]
[    0.416922] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.416929] pci 0000:00:1c.2:   bridge window [mem 0xd0700000-0xd0afffff]
[    0.416935] pci 0000:00:1c.2:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.416942] pci 0000:00:1c.4: PCI bridge to [bus 15]
[    0.416947] pci 0000:00:1c.4:   bridge window [io  0x4000-0x4fff]
[    0.416953] pci 0000:00:1c.4:   bridge window [mem 0xd0b00000-0xd0cfffff]
[    0.416959] pci 0000:00:1c.4:   bridge window [mem 0xd0d00000-0xd0efffff 64bit pref]
[    0.416967] pci 0000:00:1e.0: PCI bridge to [bus 20]
[    0.416983] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.416986] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.416990] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.416993] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff window]
[    0.416996] pci_bus 0000:11: resource 0 [io  0x2000-0x2fff]
[    0.416999] pci_bus 0000:11: resource 1 [mem 0xd0100000-0xd02fffff]
[    0.417002] pci_bus 0000:11: resource 2 [mem 0xd0300000-0xd04fffff 64bit pref]
[    0.417006] pci_bus 0000:12: resource 0 [io  0x3000-0x3fff]
[    0.417009] pci_bus 0000:12: resource 1 [mem 0xfe400000-0xfe4fffff]
[    0.417012] pci_bus 0000:12: resource 2 [mem 0xd0500000-0xd06fffff 64bit pref]
[    0.417015] pci_bus 0000:13: resource 0 [io  0xe000-0xefff]
[    0.417018] pci_bus 0000:13: resource 1 [mem 0xd0700000-0xd0afffff]
[    0.417021] pci_bus 0000:13: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.417024] pci_bus 0000:15: resource 0 [io  0x4000-0x4fff]
[    0.417027] pci_bus 0000:15: resource 1 [mem 0xd0b00000-0xd0cfffff]
[    0.417030] pci_bus 0000:15: resource 2 [mem 0xd0d00000-0xd0efffff 64bit pref]
[    0.417034] pci_bus 0000:20: resource 4 [io  0x0000-0x0cf7 window]
[    0.417037] pci_bus 0000:20: resource 5 [io  0x0d00-0xffff window]
[    0.417041] pci_bus 0000:20: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.417044] pci_bus 0000:20: resource 7 [mem 0xc0000000-0xffffffff window]
[    0.417049] pci_bus 0000:ff: resource 4 [io  0x0000-0xffff]
[    0.417052] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
[    0.417137] NET: Registered protocol family 2
[    0.417508] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.417668] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.417859] TCP: Hash tables configured (established 32768 bind 32768)
[    0.417907] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.417940] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.418046] NET: Registered protocol family 1
[    0.418074] pci 0000:00:02.0: Video device with shadowed ROM
[    0.674658] PCI: CLS mismatch (64 != 32), using 64 bytes
[    0.674777] Unpacking initramfs...
[    3.191226] Freeing initrd memory: 11420K (ffff8800369a2000 - ffff8800374c9000)
[    3.191243] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    3.191248] software IO TLB [mem 0xb757b000-0xbb57b000] (64MB) mapped at [ffff8800b757b000-ffff8800bb57afff]
[    3.191503] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x4
[    3.191518] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x4
[    3.191530] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x4
[    3.191543] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x4
[    3.191648] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    3.191700] Scanning for low memory corruption every 60 seconds
[    3.192273] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    3.192346] audit: initializing netlink subsys (disabled)
[    3.192379] audit: type=2000 audit(1459952919.068:1): initialized
[    3.193000] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    3.193057] zpool: loaded
[    3.193061] zbud: loaded
[    3.193337] VFS: Disk quotas dquot_6.6.0
[    3.193370] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    3.193738] Key type big_key registered
[    3.194222] Key type asymmetric registered
[    3.194229] Asymmetric key parser 'x509' registered
[    3.194275] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    3.194345] io scheduler noop registered
[    3.194351] io scheduler deadline registered
[    3.194372] io scheduler cfq registered (default)
[    3.195710] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    3.195937] pciehp 0000:00:1c.0:pcie04: Slot #0 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
[    3.196006] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[    3.196021] pciehp 0000:00:1c.1:pcie04: Slot #0 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
[    3.196069] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
[    3.196083] pciehp 0000:00:1c.2:pcie04: Slot #0 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
[    3.196136] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
[    3.196150] pciehp 0000:00:1c.4:pcie04: Slot #0 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
[    3.196199] pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded
[    3.196209] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    3.196251] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    3.196253] vesafb: scrolling: redraw
[    3.196256] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    3.196289] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90000800000, using 3072k, total 3072k
[    3.358935] Console: switching to colour frame buffer device 128x48
[    3.521405] fb0: VESA VGA frame buffer device
[    3.521440] intel_idle: MWAIT substates: 0x1120
[    3.521443] intel_idle: v0.4 model 0x25
[    3.521444] intel_idle: lapic_timer_reliable_states 0xffffffff
[    3.521787] GHES: HEST is not enabled!
[    3.521875] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled
[    3.524935] Non-volatile memory driver v1.3
[    3.524997] Linux agpgart interface v0.103
[    3.525113] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[    3.525142] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    3.525824] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[    3.526048] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[    3.526926] ahci 0000:00:1f.2: version 3.0
[    3.527260] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    3.542662] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    3.542668] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[    3.584118] scsi host0: ahci
[    3.584701] scsi host1: ahci
[    3.585274] scsi host2: ahci
[    3.586038] scsi host3: ahci
[    3.586639] scsi host4: ahci
[    3.586977] scsi host5: ahci
[    3.587124] ata1: SATA max UDMA/133 abar m2048@0xfe506000 port 0xfe506100 irq 28
[    3.587128] ata2: SATA max UDMA/133 abar m2048@0xfe506000 port 0xfe506180 irq 28
[    3.587132] ata3: SATA max UDMA/133 abar m2048@0xfe506000 port 0xfe506200 irq 28
[    3.587135] ata4: SATA max UDMA/133 abar m2048@0xfe506000 port 0xfe506280 irq 28
[    3.587138] ata5: SATA max UDMA/133 abar m2048@0xfe506000 port 0xfe506300 irq 28
[    3.587142] ata6: SATA max UDMA/133 abar m2048@0xfe506000 port 0xfe506380 irq 28
[    3.587258] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2] at 0x60,0x64 irq 1,12
[    3.608259] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.608329] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.608566] mousedev: PS/2 mouse device common for all mice
[    3.609540] rtc_cmos 00:01: RTC can wake from S4
[    3.609759] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    3.609798] rtc_cmos 00:01: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    3.609828] ledtrig-cpu: registered to indicate activity on CPUs
[    3.609865] hidraw: raw HID events driver (C) Jiri Kosina
[    3.610070] NET: Registered protocol family 10
[    3.612329] registered taskstats version 1
[    3.620387] Key type encrypted registered
[    3.620414] AppArmor: AppArmor sha1 policy hashing enabled
[    3.621037]   Magic number: 12:846:484
[    3.621273] rtc_cmos 00:01: setting system clock to 2016-04-06 14:28:40 UTC (1459952920)
[    3.621435] PM: Hibernation image not present or could not be loaded.
[    3.643220] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    3.906734] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.907531] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    3.907707] ata1.00: ATA-8: OCZ-ARC100, 1.01, max UDMA/133
[    3.907713] ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    3.909114] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    3.909290] ata1.00: configured for UDMA/133
[    3.909670] scsi 0:0:0:0: Direct-Access     ATA      OCZ-ARC100       1.01 PQ: 0 ANSI: 5
[    3.910266] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
[    3.910628] sd 0:0:0:0: [sda] Write Protect is off
[    3.910650] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.910938] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.913256]  sda: sda1 sda2
[    3.914087] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.190745] tsc: Refined TSC clocksource calibration: 1329.950 MHz
[    4.190751] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x132ba2b6fd8, max_idle_ns: 440795231837 ns
[    4.226732] ata2: SATA link down (SStatus 0 SControl 300)
[    4.546771] ata3: SATA link down (SStatus 0 SControl 300)
[    4.700018] psmouse serio1: synaptics: queried max coordinates: x [..5658], y [..4736]
[    4.820521] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 0, fw id: 604834
[    4.866791] ata4: SATA link down (SStatus 0 SControl 300)
[    4.895895] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[    5.186810] ata5: SATA link down (SStatus 0 SControl 300)
[    5.190927] Switched to clocksource tsc
[    5.506824] ata6: SATA link down (SStatus 0 SControl 300)
[    5.507683] Freeing unused kernel memory: 1560K (ffffffff81f11000 - ffffffff82097000)
[    5.507689] Write protecting the kernel read-only data: 14336k
[    5.508707] Freeing unused kernel memory: 1632K (ffff880001668000 - ffff880001800000)
[    5.509323] Freeing unused kernel memory: 1296K (ffff880001cbc000 - ffff880001e00000)
[    5.511873] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[    5.512465] random: systemd urandom read with 9 bits of entropy available
[    5.595733] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.805317] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[    5.805430] ACPI: Power Button [PWRB]
[    5.805596] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[    5.807996] ACPI: Lid Switch [LID0]
[    5.808141] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:01/input/input5
[    5.808231] ACPI: Sleep Button [SBTN]
[    5.808367] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    5.808451] ACPI: Power Button [PWRF]
[    5.837699] [drm] Initialized drm 1.1.0 20060810
[    5.838428] ACPI: bus type USB registered
[    5.838496] usbcore: registered new interface driver usbfs
[    5.838528] usbcore: registered new interface driver hub
[    5.838612] usbcore: registered new device driver usb
[    5.841082] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.841471] ehci-pci: EHCI PCI platform driver
[    5.841829] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    5.841845] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    5.841868] ehci-pci 0000:00:1a.0: debug port 2
[    5.845849] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    5.845886] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfe508000
[    5.855078] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    5.855197] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    5.855203] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.855208] usb usb1: Product: EHCI Host Controller
[    5.855213] usb usb1: Manufacturer: Linux 4.1.15-8-default ehci_hcd
[    5.855217] usb usb1: SerialNumber: 0000:00:1a.0
[    5.855570] hub 1-0:1.0: USB hub found
[    5.855587] hub 1-0:1.0: 2 ports detected
[    5.856207] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    5.856222] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    5.856242] ehci-pci 0000:00:1d.0: debug port 2
[    5.863787] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    5.863832] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe507000
[    5.874779] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    5.874918] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    5.874924] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.874928] usb usb2: Product: EHCI Host Controller
[    5.874932] usb usb2: Manufacturer: Linux 4.1.15-8-default ehci_hcd
[    5.874936] usb usb2: SerialNumber: 0000:00:1d.0
[    5.876619] hub 2-0:1.0: USB hub found
[    5.876640] hub 2-0:1.0: 2 ports detected
[    5.889352] [drm] Memory usable by graphics device = 2048M
[    5.889364] checking generic (c0000000 300000) vs hw (c0000000 10000000)
[    5.889368] fb: switching to inteldrmfb from VESA VGA
[    5.889424] Console: switching to colour dummy device 80x25
[    5.889843] [drm] Replacing VGA console driver
[    5.906938] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    5.906945] [drm] Driver supports precise vblank timestamp query.
[    5.907120] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    5.933177] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    5.934354] acpi device:29: registered as cooling_device0
[    5.934575] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[    5.934784] [drm] Initialized i915 1.6.0 20150327 for 0000:00:02.0 on minor 0
[    5.943420] fbcon: inteldrmfb (fb0) is primary device
[    6.166793] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    6.186786] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    6.299216] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[    6.299219] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    6.299554] hub 1-1:1.0: USB hub found
[    6.299715] hub 1-1:1.0: 6 ports detected
[    6.319119] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[    6.319123] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    6.319566] hub 2-1:1.0: USB hub found
[    6.319743] hub 2-1:1.0: 8 ports detected
[    6.570882] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
[    6.590879] usb 2-1.1: new high-speed USB device number 3 using ehci-pci
[    6.684823] usb 2-1.1: New USB device found, idVendor=125f, idProduct=317a
[    6.684826] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.684828] usb 2-1.1: Product: ADATA USB Flash Drive
[    6.684830] usb 2-1.1: Manufacturer: ADATA
[    6.684832] usb 2-1.1: SerialNumber: 1108170000000284
[    6.687401] usb-storage 2-1.1:1.0: USB Mass Storage device detected
[    6.687611] scsi host6: usb-storage 2-1.1:1.0
[    6.687776] usbcore: registered new interface driver usb-storage
[    6.688297] usbcore: registered new interface driver uas
[    6.703601] usb 1-1.4: New USB device found, idVendor=04f2, idProduct=b234
[    6.703606] usb 1-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    6.703610] usb 1-1.4: Product: Laptop_Integrated_Webcam_2M
[    6.703614] usb 1-1.4: Manufacturer: CNFA227H216040000L32
[    6.754930] usb 2-1.5: new full-speed USB device number 4 using ehci-pci
[    6.848333] usb 2-1.5: New USB device found, idVendor=0cf3, idProduct=3002
[    6.848335] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    6.850841] Console: switching to colour frame buffer device 170x48
[    6.856055] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    6.856059] i915 0000:00:02.0: registered panic notifier
[    7.687790] scsi 6:0:0:0: Direct-Access     ADATA    USB Flash Drive  1.00 PQ: 0 ANSI: 6
[    7.688209] sd 6:0:0:0: Attached scsi generic sg1 type 0
[    7.688718] sd 6:0:0:0: [sdb] 30883840 512-byte logical blocks: (15.8 GB/14.7 GiB)
[    7.689609] sd 6:0:0:0: [sdb] Write Protect is off
[    7.689616] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
[    7.690384] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[    7.696143]  sdb: sdb1
[    7.698946] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    7.886887] raid6: sse2x1   gen()  3254 MB/s
[    7.954960] raid6: sse2x1   xor()  2512 MB/s
[    8.022894] raid6: sse2x2   gen()  3810 MB/s
[    8.090892] raid6: sse2x2   xor()  2943 MB/s
[    8.158963] raid6: sse2x4   gen()  4199 MB/s
[    8.226895] raid6: sse2x4   xor()  3242 MB/s
[    8.226898] raid6: using algorithm sse2x4 gen() 4199 MB/s
[    8.226900] raid6: .... xor() 3242 MB/s, rmw enabled
[    8.226902] raid6: using ssse3x2 recovery algorithm
[    8.227402] xor: measuring software checksum speed
[    8.266896]    prefetch64-sse:  5685.000 MB/sec
[    8.306930]    generic_sse:  4997.000 MB/sec
[    8.306933] xor: using function: prefetch64-sse (5685.000 MB/sec)
[    8.314958] Btrfs loaded, assert=on
[    8.316231] BTRFS: device fsid f9dfa308-8b97-4d6f-8a41-d3d8aa88fb5d devid 1 transid 353 /dev/sdb1
[    8.432629] BTRFS info (device sdb1): disk space caching is enabled
[    8.432640] BTRFS: has skinny extents
[    8.931260] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[    9.819679] BTRFS info (device sdb1): disk space caching is enabled
[   10.010670] random: nonblocking pool is initialized
[   10.140827] ACPI: AC Adapter [AC] (on-line)
[   10.143329] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 11, expected 14)
[   10.143715] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[   10.145819] atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
[   10.145825] atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
[   10.163968] ACPI: Battery Slot [BAT0] (battery present)
[   10.197243] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[   10.250782] wmi: Mapper loaded
[   10.265465] thermal LNXTHERM:00: registered as thermal_zone0
[   10.265475] ACPI: Thermal Zone [THM] (49 C)
[   10.270254] input: PC Speaker as /devices/platform/pcspkr/input/input8
[   10.320703] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000549 (\_SB_.PCI0.SBRG.GPI1) (20150410/utaddress-254)
[   10.320719] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.320725] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000549 (\_SB_.PCI0.SBRG.GPI1) (20150410/utaddress-254)
[   10.320735] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.320739] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000549 (\_SB_.PCI0.SBRG.GPI1) (20150410/utaddress-254)
[   10.320778] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.320782] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   10.337810] ACPI Warning: SystemIO range 0x000000000000F000-0x000000000000F01F conflicts with OpRegion 0x000000000000F000-0x000000000000F00F (\_SB_.PCI0.SMB_.SMBI) (20150410/utaddress-254)
[   10.337827] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.347545] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   10.620630] iTCO_vendor_support: vendor-support=0
[   10.644107] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   10.656827] dell_laptop: Keyboard brightness level control not supported
[   10.708751] input: Dell WMI hotkeys as /devices/virtual/input/input9
[   10.747836] cfg80211: Calling CRDA to update world regulatory domain
[   10.754821] Linux video capture interface: v2.00
[   10.792175] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   10.792257] iTCO_wdt: Found a HM57 TCO device (Version=2, TCOBASE=0x0460)
[   10.792480] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   10.910362] Bluetooth: Core ver 2.20
[   10.910399] NET: Registered protocol family 31
[   10.910402] Bluetooth: HCI device and connection manager initialized
[   10.910409] Bluetooth: HCI socket layer initialized
[   10.910414] Bluetooth: L2CAP socket layer initialized
[   10.910423] Bluetooth: SCO socket layer initialized
[   10.985329] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (04f2:b234)
[   10.989290] dell_laptop: Keyboard brightness level control not supported
[   10.995629] input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10
[   10.995793] usbcore: registered new interface driver uvcvideo
[   10.995798] USB Video Class driver (1.1.1)
[   11.044494] cfg80211: World regulatory domain updated:
[   11.044504] cfg80211:  DFS Master region: unset
[   11.044507] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   11.044513] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   11.044517] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   11.044521] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   11.044527] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   11.044532] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   11.044537] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   11.044541] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   11.044546] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   11.108512] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   11.109262] r8169 0000:13:00.0 eth0: RTL8168e/8111e at 0xffffc90000774000, 18:03:73:59:96:94, XID 0c200000 IRQ 32
[   11.109268] r8169 0000:13:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[   11.137503] ath: phy0: ASPM enabled: 0x42
[   11.137512] ath: EEPROM regdomain: 0x60
[   11.137515] ath: EEPROM indicates we should expect a direct regpair map
[   11.137518] ath: Country alpha2 being used: 00
[   11.137520] ath: Regpair used: 0x60
[   11.164612] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD81B1X5: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[   11.164620] snd_hda_codec_idt hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   11.164624] snd_hda_codec_idt hdaudioC0D0:    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[   11.164627] snd_hda_codec_idt hdaudioC0D0:    mono: mono_out=0x0
[   11.164630] snd_hda_codec_idt hdaudioC0D0:    inputs:
[   11.164634] snd_hda_codec_idt hdaudioC0D0:      Internal Mic=0x11
[   11.164637] snd_hda_codec_idt hdaudioC0D0:      Mic=0xa
[   11.176740] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   11.177306] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90000880000, irq=17
[   11.201599] usbcore: registered new interface driver btusb
[   11.245552] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   11.249366] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   11.249845] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   11.250105] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   11.480696] r8169 0000:13:00.0 p1p2: renamed from eth0
[   11.603746] audit: type=1305 audit(1459945728.478:2): audit_pid=647 old=0 auid=4294967295 ses=4294967295 res=1
[   16.267761] Bluetooth: Can't change to loading configuration err
[   16.267904] ath3k: probe of 2-1.5:1.0 failed with error -110
[   16.268021] usbcore: registered new interface driver ath3k
[   54.704366] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   55.724277] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   56.573552] ip_tables: (C) 2000-2006 Netfilter Core Team
[   73.034585] r8169 0000:13:00.0 p1p2: link down
[   73.059641] NET: Registered protocol family 17
[   98.071980] dell_laptop: Keyboard brightness level control not supported
[  118.850501] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  118.850509] Bluetooth: BNEP filters: protocol multicast
[  118.850519] Bluetooth: BNEP socket layer initialized
[  134.126413] fuse init (API version 7.23)
[  146.229029] wlan0: authenticate with 88:f7:c7:9b:82:27
[  146.246953] wlan0: send auth to 88:f7:c7:9b:82:27 (try 1/3)
[  146.248822] wlan0: authenticated
[  146.251210] wlan0: associate with 88:f7:c7:9b:82:27 (try 1/3)
[  146.254844] wlan0: RX AssocResp from 88:f7:c7:9b:82:27 (capab=0x1411 status=0 aid=3)
[  146.254959] wlan0: associated
[  149.083323] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:ceaf:78ff:fe84:01c5 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=430 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=390
[  149.111749] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:ceaf:78ff:fe84:01c5 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=258 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=218
[  149.333835] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:ceaf:78ff:fe84:01c5 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=430 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=390
[  149.584907] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:ceaf:78ff:fe84:01c5 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=430 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=390
[  149.785187] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:ceaf:78ff:fe84:01c5 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=400 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=360
[  160.460433] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[  164.752381] BTRFS info (device sdb1): relocating block group 15229517824 flags 34
[  183.910935] IPv4: martian destination 0.0.0.0 from 169.254.179.33, dev wlan0
[  184.935005] IPv4: martian destination 0.0.0.0 from 169.254.179.33, dev wlan0
[  205.256244] BTRFS info (device sdb1): relocating block group 15263072256 flags 34
[  223.018006] BTRFS info (device sdb1): relocating block group 15296626688 flags 34
[  226.409162] IPv4: martian destination 0.0.0.0 from 169.254.179.33, dev wlan0
[  227.433305] IPv4: martian destination 0.0.0.0 from 169.254.179.33, dev wlan0

[petertomasy]

   10.910362] Bluetooth: Core ver 2.20
[   10.910402] Bluetooth: HCI device and connection manager initialized
[   10.910409] Bluetooth: HCI socket layer initialized
[   10.910414] Bluetooth: L2CAP socket layer initialized
[   10.910423] Bluetooth: SCO socket layer initialized
[   16.267761] Bluetooth: Can't change to loading configuration err
[  118.850501] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  118.850509] Bluetooth: BNEP filters: protocol multicast
[  118.850519] Bluetooth: BNEP socket layer initialized

   chcelo by to poslať ten výpis, keď bluetooth nefunguje ( teraz asi funguje ... )

stačí keď zadaš do terminálu :

Kód: [Vybrat]

dmesg | grep Blue

[Abby]

Já to nechápu, při tom výpise bluetooth nefungovalo, k telefonu jsem se nemohla připojit a vzájemně se neviděli. Takže jsem nainstalovala Kubuntu 15.10 a tam bluetooth funguje od začátku, viz příloha.
Fakt netuším, co to může být, ale HW problém by to být neměl. Po celou dobu používám bluetooth ve Windows, většinou pro připojení notebooku přes telefon k internetu (i několik hodin v kuse) a ani jednou nebyl problém. Teď v Kubuntu to také vypadá normálně, jdou posílat soubory, procházet telefon, připojit se k internetu a to i po restartu. Nechápu to :-( Doufám ale, že tento stav už vydrží.

[Cuore]

   10.910362] Bluetooth: Core ver 2.20
[   10.910402] Bluetooth: HCI device and connection manager initialized
[   10.910409] Bluetooth: HCI socket layer initialized
[   10.910414] Bluetooth: L2CAP socket layer initialized
[   10.910423] Bluetooth: SCO socket layer initialized
[   16.267761] Bluetooth: Can't change to loading configuration err
[  118.850501] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  118.850509] Bluetooth: BNEP filters: protocol multicast
[  118.850519] Bluetooth: BNEP socket layer initialized

   chcelo by to poslať ten výpis, keď bluetooth nefunguje ( teraz asi funguje ... )

stačí keď zadaš do terminálu :

Kód: [Vybrat]

dmesg | grep Blue

Tady nevidím, že by to fungovalo, načítá to blouetooth, inicializuje a pak změní konfiguraci. Je tam nějaký problém s ovladačem

Kód: [Vybrat]

[   11.137503] ath: phy0: ASPM enabled: 0x42
[   11.137512] ath: EEPROM regdomain: 0x60
[   11.137515] ath: EEPROM indicates we should expect a direct regpair map
[   11.137518] ath: Country alpha2 being used: 00
[   11.137520] ath: Regpair used: 0x60
[   11.177306] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90000880000, irq=17
[   16.267904] ath3k: probe of 2-1.5:1.0 failed with error -110
[   16.268021] usbcore: registered new interface driver ath3k
Podle tohoto je bluetooth pověšené na USB proto se nenašlo ve výpisu. Proč ale není v rfkill listu je divné, pravděpodobně problém s modulem. Chtělo by to mrknout na načtené moduly

Kód: [Vybrat]

lsmod | grep blue
lsmod | grep atha pak se podívat pod USB

Kód: [Vybrat]

lsusb | grep athedit:
tak jsem pátral a bylo na 12.04 hlášeno jako bug
https://bugs.launchpad.net/libmtp/+bug/975222
nějaké řešení tam je.....
pak jsem našel, že pomohla i instalace blueman