Nefunguje zvuk

[DonMafia]

Dobrý deň. Nainštaloval som si najnovšiu verziu ubuntu a nefunguje mi zvuk,ako sa to dá vyriešiť? Ďakujem

[martyj]

Nejnovější znamená 16.10 ? Když zadáš do terminálu alsamixer je to naplno ? Je tam nastavený správný výstup ?

[DonMafia]

Dal som všetko na plno aj tak nehraje.Akurát auto-mute mám enabled no keď to zmením aj tak nehraje

[martyj]

Zkus se podívat sem : https://itsfoss.com/fix-sound-ubuntu-1304-quick-tip/

[DonMafia]

Ináč som v režime Digital Stereo (HDMI a iné tam není

[martyj]

Spíš mi odpověz na mojí otázku.

[Cuore]

Mám nainstalovaný systém a nejde zvuk poraďte 
=v%C3%BDpisy]http://wiki.ubuntu.cz/%C5%99e%C5%A1en%C3%AD_probl%C3%A9m%C5%AF/jak_dodat_informace_do_f%C3%B3ra?s[]=v%C3%BDpisy
alespoň základní výpis jako

Kód: [Vybrat]

lspci -vv

[DonMafia]

skúsil som speech-dispatcher a mám tam toto:

# Defaults for the speech-dispatcher initscript, from speech-dispatcher

# Set to yes to start system wide Speech Dispatcher
RUN=no

mám pocit že to je zlé

[martyj]

Začni tím, že nám konečně řekneš, jestli ti to detekuje tu kartu, nebo ne. Viz výpis.

[DonMafia]

CARD HDA INTEL MID
CHIP CONEXANT

ale mám na výber eŠte jednu a to že HDA ATI HDMI

[Ventero]

Proc nedas ten vypis a neodpovis na otazky, ktere ti kladou zkuseni kolegove ochotni poradit? Kdyz nechces spolupracovat, tak by taky nekdo mohl dojit k nazoru, at si poradis sam ...

[DonMafia]

Áno ubuntu je 16.10 a vŠetko je naplno

[Ventero]

A ten vypis? Otevrit terminal a opsat tech par pismen das vpoho a pak jen vypis zkopcis a tady ho vystavis - take to neni slozite. Nezapomen vypis oznacit a kliknout na ikonu dvojiteho krizku v editacnim panelu nad textovym polem.

[DonMafia]

Ale výpis akého príkazu? alsamixer?

[martyj]

Ale výpis akého príkazu? alsamixer?

Už ti to psal Cuore :

Kód: [Vybrat]

lspci -vv
A já se tě ptal, co máš nastaveno jako výstup v alsamixeru zjisttíš pomocí F6.

Čteš vůbec ty odpovědi ?

[DonMafia]

Tak v alsamixeri mám keď stlačím označené v takom obdĺžníku default a výpis je

Kód: [Vybrat]

00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18)
Subsystem: ASUSTeK Computer Inc. Core Processor DRAM Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 18) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: c0000000-d00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
Subsystem: ASUSTeK Computer Inc. 5 Series/3400 Series Chipset HECI Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 31
Region 0: Memory at d520a000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me

00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. 5 Series/3400 Series Chipset USB2 Enhanced Host Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d5208000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci

00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
Subsystem: ASUSTeK Computer Inc. 5 Series/3400 Series Chipset High Definition Audio
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 32
Region 0: Memory at d5200000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel

00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: d3e00000-d51fffff
Prefetchable memory behind bridge: 00000000d5300000-00000000d54fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 26
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: d2a00000-d3dfffff
Prefetchable memory behind bridge: 00000000d5500000-00000000d56fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 27
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: d1600000-d29fffff
Prefetchable memory behind bridge: 00000000d5700000-00000000d58fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 28
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: d0200000-d15fffff
Prefetchable memory behind bridge: 00000000d5900000-00000000d5afffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. 5 Series/3400 Series Chipset USB2 Enhanced Host Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at d5207000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1f.0 ISA bridge: Intel Corporation HM55 Chipset LPC Interface Controller (rev 06)
Subsystem: ASUSTeK Computer Inc. HM55 Chipset LPC Interface Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich

00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 06) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. 5 Series/3400 Series Chipset 4 port SATA AHCI Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 29
Region 0: I/O ports at e070 [size=8]
Region 1: I/O ports at e060 [size=4]
Region 2: I/O ports at e050 [size=8]
Region 3: I/O ports at e040 [size=4]
Region 4: I/O ports at e020 [size=32]
Region 5: Memory at d5206000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci

00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
Subsystem: ASUSTeK Computer Inc. 5 Series/3400 Series Chipset SMBus Controller
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 4
Region 0: Memory at d5205000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at e000 [size=32]
Kernel modules: i2c_i801

01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Robson CE [Radeon HD 6370M/7370M] (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Radeon HD 6370M
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 30
Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at d0020000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at d000 [size=256]
Expansion ROM at d0000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
Kernel modules: radeon

01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Cedar HDMI Audio [Radeon HD 5400/6300 Series]
Subsystem: ASUSTeK Computer Inc. Cedar HDMI Audio [Radeon HD 5400/6300 Series]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 33
Region 0: Memory at d0040000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel

03:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
Subsystem: AzureWave AW-NE785 / AW-NE785H 802.11bgn Wireless Full or Half-size Mini PCIe Card
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at d2a00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
Kernel modules: ath9k

05:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 80)
Subsystem: ASUSTeK Computer Inc. SD/MMC Host Controller
Physical Slot: 5
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 18
Region 0: Memory at d0207000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
Kernel modules: sdhci_pci

05:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 80) (prog-if 01)
Subsystem: ASUSTeK Computer Inc. Standard SD Host Controller
Physical Slot: 5
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 18
Region 0: Memory at d0206000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel modules: sdhci_pci

05:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 80)
Subsystem: ASUSTeK Computer Inc. MS Host Controller
Physical Slot: 5
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 18
Region 0: Memory at d0205000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: jmb38x_ms
Kernel modules: jmb38x_ms

05:00.4 System peripheral: JMicron Technology Corp. xD Host Controller (rev 80)
Subsystem: ASUSTeK Computer Inc. xD Host Controller
Physical Slot: 5
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 4
Region 0: Memory at d0204000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>

05:00.5 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 03)
Subsystem: ASUSTeK Computer Inc. JMC250 PCI Express Gigabit Ethernet Controller
Physical Slot: 5
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 34
Region 0: Memory at d0200000 (32-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at 9100 [size=128]
Region 3: I/O ports at 9000 [size=256]
Capabilities: <access denied>
Kernel driver in use: jme
Kernel modules: jme

ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05)
Subsystem: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05)
Subsystem: Intel Corporation Core Processor QuickPath Architecture System Address Decoder
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05)
Subsystem: Intel Corporation Core Processor QPI Link 0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

ff:02.1 Host bridge: Intel Corporation 1st Generation Core i3/5/7 Processor QPI Physical 0 (rev 05)
Subsystem: Intel Corporation 1st Generation Core i3/5/7 Processor QPI Physical 0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

ff:02.2 Host bridge: Intel Corporation 1st Generation Core i3/5/7 Processor Reserved (rev 05)
Subsystem: Intel Corporation 1st Generation Core i3/5/7 Processor Reserved
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

ff:02.3 Host bridge: Intel Corporation 1st Generation Core i3/5/7 Processor Reserved (rev 05)
Subsystem: Intel Corporation 1st Generation Core i3/5/7 Processor Reserved
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0


[Ventero]

Tady mate dukaz - on to fakt necte 

[DonMafia]

Sorry nepoužil som code,upravím hneď

[Cuore]

vše vypadá OK jen je problém v tom, že se ti asi perou zvukovky, dej sem výpisy ze

Kód: [Vybrat]

cat /proc/asound/cards
cat /proc/asound/modules
grep 'card [0-9]' /usr/share/alsa/alsa.conf

[DonMafia]

cat /proc/asound/cards

Kód: [Vybrat]

0 [MID            ]: HDA-Intel - HDA Intel MID
                      HDA Intel MID at 0xd5200000 irq 32
 1 [HDMI           ]: HDA-Intel - HDA ATI HDMI
                      HDA ATI HDMI at 0xd0040000 irq 33

cat /proc/asound/modules

Kód: [Vybrat]

0 snd_hda_intel
 1 snd_hda_intel

grep 'card [0-9]' /usr/share/alsa/alsa.conf

Kód: [Vybrat]

defaults.ctl.card 0
defaults.pcm.card 0
defaults.rawmidi.card 0
defaults.hwdep.card 0
defaults.timer.card 0


[Cuore]

vše je v pořádku, mělo by to fungovat. Si schopen otestovat zda ti jde zvuk po HDMI. Propojit s TV apod.

[DonMafia]

Nooo nemám to ako otestovať.Skúšal som že či funguje reproduktory a to tak že som v biose nastavil aby pri spúšťani ntb vydalo zvuk a oni fungujú tak nechápem

[Cuore]

mě to přijde, že máš přepnuto na HDMI. Nainstaluj z centra gnome mixer pro Alsa a tam by si měl viděl oba výstupy. Přepni na ten intel HDA

[DonMafia]

Nepomohlo...

[Cuore]

vidíš tam obě zvukovky a máš tam vše povoleno a zesíleno?