nastavení rozlišení monitoru a frekvence - žádné novinky?

[geuin]

používám betu Fiesty Fawn a doufal jsem, že se zlepší podpora nastavení monitoru. Doma mám dva - LCD 19, 1400x900 a klasický CRT 17. U obou dvou jsem dost krkolomě nastavoval rozlišení přímo v xorg.conf. Proč? Koupí nového LCD a výměna z CRT. Druhý ubuntu jsem instaloval na CRT, kde se nastavila frekvence u 1024x768 na 60Hz, přitom monitor zvládá v klidu při tomto rozliš. 100 Hz. Nakonec jsem to pomocí návodů zvládnul....

Doufal jsem, že ve Fiesty to vylepší, ale zdá se, že nic. Hledal jsem v novinkách, ale nenašel. Nevíte, jestli jsou v tomto ohledu nějaké plány? Nastavování ručně rozliš. v text. souboru mi přijde jako přežitek. Jaký na to máte názor?

[jagular]

Xorg smeruje k automaticke detekci HW a postupne minimalizaci zasahu do conf, ale Feisty vyjde driv nez nove Xorg - takze priste ...

[geuin]

tak se budu těšit, díky za odpověď...

[michal]

Prave jsem nahodil 7.04 na notebooku fujitsu a bohuzel na sve externi 19" silene velke rozliseni.. snazil jsem se zmenit a postupovat dle navodu na foru, ale bohuzel bez vysledku.. ve widlich jedu i dualni plochu a vse v poradku, na notasu 1024 a na monitoru 1280. Stacilo by mi u ubuntu kdyby jel jen monitor, ale ve vyssim rozliseni nez je nynejsich 1024. Se mi nevlezou ani okna.
Dekuji za pomoc, ci odkaz, vim, ze je toho tady plno, ale jako uplny zacatecnik bych rad neco 100% =)

[LS]

Pred chvili jsem doinstaloval Ubuntu 7.04 Feisty na stroji s monitorem s rozlisenim 1440x900. Instalator chybne nastavil jako vychozi rozliseni 1440x1440. Otevrel jsem proto soubor /etc/X11/xorg.conf, upravil nastaveni takto:
1/ ponechal jsem pouze radky pro defaultdepth=24
2/ opravil jsem vychozi rozliseni, ostatni moznosti jsem zrusil
3/ odhlasil se, stiskl ctrl+alt+backspace

hotovo, funguje

prikladam vypis konfiguracniho souboru

Kód: [Vybrat]

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Device"
Identifier "ATI Technologies Inc R480 [Radeon X850XT (PCIE)] (Primary)"
Driver "ati"
BusID "PCI:1:0:0"
EndSection

Section "Monitor"
Identifier "L194WT"
Option "DPMS"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc R480 [Radeon X850XT (PCIE)] (Primary)"
Monitor "L194WT"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1440x900"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice     "stylus" "SendCoreEvents"
InputDevice     "cursor" "SendCoreEvents"
InputDevice     "eraser" "SendCoreEvents"
EndSection

Section "DRI"
Mode 0666
EndSection

[michal]

Provedl jsem naprosto to stejne, ale bohuzel nic se nestalo.. notebook fujitsu siemens amilo pro v8010, displej lg1900J a nic..

[LS]

co je tam za grafickou kartu?

[michal]

co je tam za grafickou kartu?

Intel GMA 900/915.. ve winech jedu v pohode na vyssim rozliseni nez 1024..

[LS]

Poslete prosim vypis celeho xorg.conf. Mimochodem, umi vubec linuxovy ovladac i915 pouzit ruzna rozliseni pro interni a externi monitor? Obavam se, ze spis asi ne. Tady se to zrovna nekdo snazi resit, zatim bez vysledku.

[michal]

Poslete prosim vypis celeho xorg.conf. Mimochodem, umi vubec linuxovy ovladac i915 pouzit ruzna rozliseni pro interni a externi monitor? Obavam se, ze spis asi ne. Tady se to zrovna nekdo snazi resit, zatim bez vysledku.

jakmile se dostanu z prace, tak sem pastnu xorg.. vetsinou pracuji na externim displeji, tedy jde mi zejmena o vyssi rozliseni na nem.. dve plochy pouzivam minimalne.. nektera okna (plugin u gaim) se mi ani nevlezla na obrazovku, abych je mohl potvrdit.. zatim je me ubuntu jako pro slepe =)

[michal]

Poslete prosim vypis celeho xorg.conf. Mimochodem, umi vubec linuxovy ovladac i915 pouzit ruzna rozliseni pro interni a externi monitor? Obavam se, ze spis asi ne. Tady se to zrovna nekdo snazi resit, zatim bez vysledku.

takze:

Kód: [Vybrat]

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "cz"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Device"
Identifier "Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller"
Driver "i810"
BusID "PCI:0:2:0"
EndSection

Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice     "stylus" "SendCoreEvents"
InputDevice     "cursor" "SendCoreEvents"
InputDevice     "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection

Section "DRI"
Mode 0666
EndSection

[michal]

ono i celkove se mi zda pismo rozmazane.. ale porad hlavne velike =( to je na praci temer nepouzitelne.. neci se vracet k win =)

[Jakub Lucký]

Písmo se dá nastavit v
Systém -> Volby -> Písmo

Nastavte si tam správné vyhlazování apod.

[michal]

Písmo se dá nastavit v
Systém -> Volby -> Písmo

Nastavte si tam správné vyhlazování apod.

Diky to mam.. ale pismo SANS se moc snad ani vyhladit neda.. asi jsem zhyckany z macosx.. ale rozliseni porad male..