Prosíme přihlašte se nebo zaregistrujte.

Přihlašte se svým uživatelským jménem a heslem.
Vaše pomoc je stále potřeba!

Autor Téma: nejde 3D akcelerace - Intel Corporation Mobile 945GM  (Přečteno 3224 krát)

tomsoyer

  • Aktivní člen
  • *
  • Příspěvků: 119
nejde 3D akcelerace - Intel Corporation Mobile 945GM
« kdy: 06 Května 2007, 21:35:17 »
po marných pokusech rozchodit beryl.
na HP nx6310 s Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)
jsem nainstaloval po zdejší radě přes synaptic ovladače: 915resolution a xserver-xorg-video-intel.
Před touto instalací mi po zadání příkazu
Kód: [Vybrat]
glxinfo | grep directnapsalo yes
nyní ale se vypíše
Kód: [Vybrat]
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
Error: couldn't find RGB GLX visual
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
pokud odinstaluji tyto ovladače tak mi po restartu nenaběhl xserver a musel jsem pomocí
Kód: [Vybrat]
sudo dpkg-reconfigure xserver-xorgnastavit obecny ovladač vesa a znovu nainstalovat tyto dva ovladače a obnovit původní xorg.conf
takto vypada
Kód: [Vybrat]
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
        Load    "dbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "cz"
Option "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
Identifier "Intel Corporation Mobile Integrated Graphics Controller"
Driver "i810"
BusID "PCI:0:2:0"
  Option "XAANoOffscreenPixmaps" "true"
EndSection

Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation Mobile Integrated Graphics Controller"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice     "stylus" "SendCoreEvents"
InputDevice     "cursor" "SendCoreEvents"
InputDevice     "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection

Section "DRI"
Mode 0666
EndSection

Section "Extensions"
    Option "Composite" "enable"
EndSection
prosím o radu jak znovu rozjed 3D akceleraci.
díky
HP nx6310 + Kubuntu Feisty Fawn

Jakub Lucký

  • Závislák
  • ***
  • Příspěvků: 3433
    • Jakub Lucký
nejde 3D akcelerace - Intel Corporation Mobile 945GM
« Odpověď #1 kdy: 06 Května 2007, 21:47:05 »
Zkuste nainstalovat balík 915resolution...
Ale je to divné... 3D podpora pro tyto grafiky je přímo v jádře
FAQ-Často kladené otázky   Návody(wiki)     
Jakub@Life:~$ Ubuntu změnilo váš život, přejete si změny uložit?(Y/N)?
Děkujeme, že nekrmíte trolly Blogísek  :wq

nikola

  • Stálý člen
  • **
  • Příspěvků: 944
    • http://home.tiscali.cz/nikola
nejde 3D akcelerace - Intel Corporation Mobile 945GM
« Odpověď #2 kdy: 06 Května 2007, 22:47:20 »
I810 neumí akceleraci ve 24bitech. Musíš změnít barevnou hloubku na 16.

tomsoyer

  • Aktivní člen
  • *
  • Příspěvků: 119
nejde 3D akcelerace - Intel Corporation Mobile 945GM
« Odpověď #3 kdy: 06 Května 2007, 23:14:04 »
Citace: jakub.lucky
Zkuste nainstalovat balík 915resolution...
Ale je to divné... 3D podpora pro tyto grafiky je přímo v jádře
ten mám nainstalovaný jak jsem psal na začátku instaloval jsem ho spolu s xserver-xorg-video-intel.
Od té doby mi ta 3D akcelerace nejde před tím šla, ale nešel beryl.
teď nejde ani jedno:-( a když je odinstaluju tak nenaběhne xserver.
HP nx6310 + Kubuntu Feisty Fawn

tomsoyer

  • Aktivní člen
  • *
  • Příspěvků: 119
nejde 3D akcelerace - Intel Corporation Mobile 945GM
« Odpověď #4 kdy: 06 Května 2007, 23:19:51 »
Citace: nikola
I810 neumí akceleraci ve 24bitech. Musíš změnít barevnou hloubku na 16.
tak po změně je výsledek stejny stále nejde, jediný efekt je málo barev a prostředí vypadá "vyblitě"
HP nx6310 + Kubuntu Feisty Fawn

tomsoyer

  • Aktivní člen
  • *
  • Příspěvků: 119
nejde 3D akcelerace - Intel Corporation Mobile 945GM
« Odpověď #5 kdy: 13 Května 2007, 18:58:19 »
Pořád mi nejde ta 3d akcelerace.
Navíc jsem musel změnit video driver v MPlayeru dřív mi fungoval xv x11/xv ten nespustí video, jediný který funguje je x11/X11(XImage/Shm).
Ale sním nefunguje fullscreen :-( pokud ho dám tak video zůstane v původní velikosti jen okolí je černé.
Někde jsem četl že je to způsobené nefunční 3D akcelerací.
Prosím o radu někoho zkušeného kde by mohla být chyba?
HP nx6310 + Kubuntu Feisty Fawn

tomsoyer

  • Aktivní člen
  • *
  • Příspěvků: 119
nejde 3D akcelerace - Intel Corporation Mobile 945GM
« Odpověď #6 kdy: 22 Května 2007, 15:52:25 »
Zkusil jsem přeinstalovat 915resolution a xserver-xorg-video-intel a pořád žádná změna 3d akcelerace pořád nejde.
Prosím zkuste se na to kouknout už jsem z toho nešťastný rád bych beryla a v mp fullscreen.
předem děkuji.
Hlavně nechápu kde je chyba když dříve akcelerace normálně bezproblémů fungovala.
HP nx6310 + Kubuntu Feisty Fawn

LS

  • Závislák
  • ***
  • Příspěvků: 3849
    • http://linux.euweb.cz
nejde 3D akcelerace - Intel Corporation Mobile 945GM
« Odpověď #7 kdy: 22 Května 2007, 16:45:40 »
Balik 915resolution nema co delat s 3D akceleraci. Jak uz nazev napovida, jedna se o nastroj pro nastaveni rozliseni.

tomsoyer

  • Aktivní člen
  • *
  • Příspěvků: 119
nejde 3D akcelerace - Intel Corporation Mobile 945GM
« Odpověď #8 kdy: 22 Května 2007, 17:01:12 »
JJ také jsem si to myslet, ale už zkouším vše co by mi mohlo pomoci.
Podle mě je problém s xserver-xorg-video-intel.
než jsem ho nainstaloval tak 3d akcelerace šla, ale pokud ho teď odinstaluji tak nenaběhne xserver.
Bylo mi poraděno, že po instalaci bude beryl fungovat jak má nezobrazovali se mi totiž pozadí oken.
A teď nevím jak z toho uplně původní zálohu xorg.conf totiž nemám :-(
díky za jakoukoliv radu
HP nx6310 + Kubuntu Feisty Fawn

LS

  • Závislák
  • ***
  • Příspěvků: 3849
    • http://linux.euweb.cz
nejde 3D akcelerace - Intel Corporation Mobile 945GM
« Odpověď #9 kdy: 22 Května 2007, 17:30:55 »
Mam pribuznou kartu GMA950, v xorg.conf mam nastavene trochu jine moduly - z instalace, nic jsem nenastavoval

Kód: [Vybrat]
Section "ServerLayout"
Identifier     "X.org Configured"
Screen      0  "Screen0" 0 0
InputDevice    "Mouse0" "CorePointer"
InputDevice    "TouchPad" "AlwaysCore"
InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
RgbPath      "/usr/share/X11/rgb"
ModulePath   "/usr/lib/xorg/modules"
FontPath     "/usr/share/fonts/misc/"
FontPath     "/usr/share/fonts/TTF/"
FontPath     "/usr/share/fonts/OTF"
FontPath     "/usr/share/fonts/Type1/"
FontPath     "/usr/share/fonts/100dpi/"
FontPath     "/usr/share/fonts/75dpi/"
EndSection

Section "Module"
Load  "glx"
Load  "xtrap"
Load  "extmod"
Load  "dri"
Load  "dbe"
Load  "GLcore"
Load  "record"
Load  "type1"
Load  "freetype"
EndSection

Section "InputDevice"
Identifier  "Keyboard0"
Driver      "kbd"
EndSection

Section "InputDevice"
Identifier  "Mouse0"
Driver      "mouse"
Option    "Protocol" "auto"
Option    "Device" "/dev/input/mice"
Option    "ZAxisMapping" "4 5 6 7"
EndSection

Section "InputDevice"
   Driver   "synaptics"
   Identifier   "TouchPad"
   Option "Device"   "/dev/input/mouse1"
   Option "Protocol" "auto-dev"
   Option "LeftEdge"      "1700"
   Option "RightEdge"     "5300"
   Option "TopEdge"       "1700"
   Option "BottomEdge"    "4200"
   Option "FingerLow" "25"
   Option "FingerHigh" "30"
   Option "MaxTapTime" "180"
   Option "MaxTapMove" "220"
   Option "VertScrollDelta" "100"
   Option "MinSpeed" "0.09"
   Option "MaxSpeed" "0.18"
   Option "AccelFactor" "0.0015"
   Option "SHMConfig" "on"
EndSection

Section "Monitor"
#DisplaySize  260   160 # mm
Identifier   "Monitor0"
VendorName   "AUO"
ModelName    "3214"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: : integer, : float, : "True"/"False",
        ### : "String", : " Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"             # []
        #Option     "SWcursor"           # []
        #Option     "ColorKey"           #
        #Option     "CacheLines"         #
        #Option     "Dac6Bit"             # []
        #Option     "DRI"                 # []
        #Option     "NoDDC"               # []
        #Option     "ShowCache"           # []
        #Option     "XvMCSurfaces"       #
        #Option     "PageFlip"           # []
Identifier  "Card0"
Driver      "i810"
VendorName  "Intel Corporation"
BoardName   "Mobile 945GM/GMS/940GML Express Integrated Graphics Controller"
BusID       "PCI:0:2:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device     "Card0"
Monitor    "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport   0 0
Depth      24
Modes      "1280x800"
EndSubSection
EndSection
Kód: [Vybrat]
svoboda@george ~ $ glxinfo
name of display: :0.0
display: :0  screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
    GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
    GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGI_swap_control,
    GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_visual_select_group
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
    GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
    GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
    GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
    GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
    GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap
GLX version: 1.2
GLX extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
    GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
    GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_SGI_make_current_read,
    GLX_SGI_swap_control, GLX_SGI_video_sync, GLX_SGIS_multisample,
    GLX_SGIX_fbconfig, GLX_SGIX_visual_select_group
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) 945GM 20061017 x86/MMX/SSE2
OpenGL version string: 1.3 Mesa 6.5.2
OpenGL extensions:
    GL_ARB_depth_texture, GL_ARB_fragment_program, GL_ARB_imaging,
    GL_ARB_multisample, GL_ARB_multitexture, GL_ARB_point_parameters,
    GL_ARB_shadow, GL_ARB_texture_border_clamp, GL_ARB_texture_compression,
    GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
    GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
    GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
    GL_ARB_texture_rectangle, GL_ARB_transpose_matrix,
    GL_ARB_vertex_buffer_object, GL_ARB_vertex_program, GL_ARB_window_pos,
    GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
    GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
    GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_clip_volume_hint,
    GL_EXT_cull_vertex, GL_EXT_compiled_vertex_array, GL_EXT_convolution,
    GL_EXT_copy_texture, GL_EXT_draw_range_elements, GL_EXT_fog_coord,
    GL_EXT_histogram, GL_EXT_multi_draw_arrays, GL_EXT_packed_pixels,
    GL_EXT_point_parameters, GL_EXT_polygon_offset, GL_EXT_rescale_normal,
    GL_EXT_secondary_color, GL_EXT_separate_specular_color,
    GL_EXT_shadow_funcs, GL_EXT_stencil_wrap, GL_EXT_subtexture,
    GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp,
    GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
    GL_EXT_texture_env_dot3, GL_EXT_texture_filter_anisotropic,
    GL_EXT_texture_lod_bias, GL_EXT_texture_object, GL_EXT_texture_rectangle,
    GL_EXT_vertex_array, GL_3DFX_texture_compression_FXT1,
    GL_APPLE_client_storage, GL_APPLE_packed_pixels,
    GL_ATI_blend_equation_separate, GL_IBM_rasterpos_clip,
    GL_IBM_texture_mirrored_repeat, GL_INGR_blend_func_separate,
    GL_MESA_pack_invert, GL_MESA_ycbcr_texture, GL_MESA_window_pos,
    GL_NV_blend_square, GL_NV_light_max_exponent, GL_NV_texture_rectangle,
    GL_NV_texgen_reflection, GL_NV_vertex_program, GL_NV_vertex_program1_1,
    GL_OES_read_format, GL_SGI_color_matrix, GL_SGI_color_table,
    GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp,
    GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_SGIX_depth_texture,
    GL_SUN_multi_draw_arrays

   visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
 id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------
0x23 24 tc  0 32  0 r  y  .  8  8  8  8  0  0  0  0  0  0  0  0 0 None
0x24 24 tc  0 32  0 r  .  .  8  8  8  8  0  0  0  0  0  0  0  0 0 None
0x25 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x26 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x27 24 tc  0 32  0 r  y  .  8  8  8  8  0  0  0 16 16 16 16  0 0 Slow
0x28 24 tc  0 32  0 r  .  .  8  8  8  8  0  0  0 16 16 16 16  0 0 Slow
0x29 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x2a 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x2b 24 dc  0 32  0 r  y  .  8  8  8  8  0  0  0  0  0  0  0  0 0 None
0x2c 24 dc  0 32  0 r  .  .  8  8  8  8  0  0  0  0  0  0  0  0 0 None
0x2d 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x2e 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x2f 24 dc  0 32  0 r  y  .  8  8  8  8  0  0  0 16 16 16 16  0 0 Slow
0x30 24 dc  0 32  0 r  .  .  8  8  8  8  0  0  0 16 16 16 16  0 0 Slow
0x31 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x32 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow

tomsoyer

  • Aktivní člen
  • *
  • Příspěvků: 119
nejde 3D akcelerace - Intel Corporation Mobile 945GM
« Odpověď #10 kdy: 22 Května 2007, 18:14:42 »
Děkuji za odpověď.
zkusil jsem nahradit moduly v mém xorg.conf těma vašema, ale bohužel to nepomohlo.

glxinfo vypíše:
Kód: [Vybrat]
name of display: :0.0
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
Error: couldn't find RGB GLX visual

   visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
 id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
0x21 24 tc  1  0  0 c  .  .  0  0  0  0  0  0  0  0  0  0  0  0 0 None
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
0x22 24 dc  1  0  0 c  .  .  0  0  0  0  0  0  0  0  0  0  0  0 0 None
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
0x4a 32 tc  1  0  0 c  .  .  0  0  0  0  0  0  0  0  0  0  0  0 0 None
HP nx6310 + Kubuntu Feisty Fawn

 

Provoz zaštiťuje spolek OpenAlt.