CONKY

[kevin00]

Děkuji,
položku own windows bylo potřeba nastavit na hodnotu yes

[MORTALBAD]

nefunguje ani za svet automaticke spustanie conky po starte.

prikaz ~/.conkystart som pridal do aplikacii spustanych pri starte
subor .conkystart v home ma nastavene opravnenie spustania a obsahuje

#!/bin/bash

sleep 30 && conky

na notase mi to vsetko funguje bez editovania gksudo gedit /etc/X11/xorg.conf ale preistotu som skusil zeditovat aj ten subor, ale nepomohlo... ked spustim conky v terminaly vypise toto:

Q9400-TuzvoPC:~$ conky
Conky: /home/cunderlik/.conkyrc: 40: no such configuration: 'border_margin'
Conky: one or more $endif's are missing
Conky: desktop window (1a000a7) is subwindow of root window (ac)
Conky: window type - normal
Conky: drawing to created window (0x3e00001)
Conky: drawing to double buffer
ERROR: getIMAPEmailData:Unexpected error:[ALERT] Invalid credentials (Failure)
ERROR: getIMAPEmailData:Unexpected error:[ALERT] Invalid credentials (Failure)

vie niekto poradit, preco sa to nechce spustat po starte automaticky? thx

[jirihuf]

před cestou musí být v příkazu "sh".;-)

[pim]

Dobré deň.
Teď jsem si nastavil v Conky skutecnou pruhlednost pomoci prikazu:

Kód: [Vybrat]

own_window yes
own_window_type desktop
own_window_transparent yes
own_window_argb_visual yes
own_window_hints undecorated,below,skip_taskbar,skip_pagerLec dusledkem je, ze kdyz kliknu na plochu nebo cokoliv na ni, Conky se skryje. Jak tomu jde zamezit?
Jinak se vratim k falesne pruhlednosti, ta pracovala podle ocekavani.

[MORTALBAD]

Dobré deň.
Teď jsem si nastavil v Conky skutecnou pruhlednost pomoci prikazu:

Kód: [Vybrat]

own_window yes
own_window_type desktop
own_window_transparent yes
own_window_argb_visual yes
own_window_hints undecorated,below,skip_taskbar,skip_pagerLec dusledkem je, ze kdyz kliknu na plochu nebo cokoliv na ni, Conky se skryje. Jak tomu jde zamezit?
Jinak se vratim k falesne pruhlednosti, ta pracovala podle ocekavani.

jj to robilo aj mne. neviem sice ktory prikaz tomu zabranuje ale ked tam nastavis toto tak by ti to nemalo robit

Kód: [Vybrat]

double_buffer yes
own_window  yes
own_window_transparent yes
own_window_type normal
own_window_hints undecorate,sticky,skip_taskbar,skip_pager,below
draw_borders no
border_margin 1
draw_shades no
alignment top_right
gap_y 450
gap_x 20
update_interval 2
use_xft yes
xftfont bauhaus:pixelsize=18
use_spacer no
maximum_width 240
text_buffer_size 1280
pripajam este moje conky

http://img265.imageshack.us/img265/7928/obrazovkan.png
Edit: LuciusMare: Takove velke obrazky prosim jako link

[pim]

Parada. Jsem spokojen:-). Diky.
(Pozdeji take pripojim sve Conky, ale jeste je ve stadiu uprav a nachazi se ve stavu znacne rozborenem)
Rekonstrukce ukoncena. Vstup na staveniste povolen:


Uploaded with ImageShack.us

NET:

Kód: [Vybrat]

# Xft?
use_xft yes
xftfont cure:size=6
xftfont ae_AlMothnna:size=7

# Force UTF8? note that UTF8 support required XFT
override_utf8_locale yes

uppercase no
#default_color fff8ee

stippled_borders 0
border_inner_margin 6
border_width 0
use_spacer none
double_buffer yes
text_buffer_size 1600

own_window yes
own_window_type normal
own_window_transparent yes
own_window_argb_visual yes
own_window_hints undecorated,below,skip_taskbar,skip_pager,sticky

alignment top_left
maximum_width 300
minimum_size 300 20
text_buffer_size 1600

draw_shades no
draw_outline no
draw_borders no

gap_x 160
gap_y 20

update_interval 5.0

TEXT
${color c88034}${font StyleBats:size=16:weight=bold}T$font ${font ae_AlMothnna:size=12:weight=bold}${voffset -8}SysLog$font
${color c88034}${voffset -5}${hr 2}${color}
${execi 30 tail -n5 /var/log/messages | awk '{print " ",$5,$6,$7,$8,$9,$10}' | fold -w60}

${color c88034}${font StyleBats:size=16:weight=bold}3$font ${font ae_AlMothnna:size=12:weight=bold}${voffset -8}Síťová připojení$font
${color c88034}${voffset -5}${hr 2}${color}
Počet aktivních spojeni: ${tcp_portmon 1 65535 count}
${font ae_AlMothnna:size=7:weight=bold}Cílová adresa:${goto 220}PID/Proces:$font
${execp netstat -ept | grep SPOJ | awk '{print $5,"${goto 240}"$9}' | sort | uniq -c | sort -nr}
SYSTEM:

Kód: [Vybrat]

# Use Xft?
use_xft yes
xftfont cure:size=6

# Force UTF8? note that UTF8 support required XFT
override_utf8_locale yes

stippled_borders 0
border_inner_margin 6
border_width 0

own_window yes
own_window_type normal#override
own_window_transparent yes
own_window_argb_visual yes
own_window_hints undecorated,below,skip_taskbar,skip_pager,sticky

double_buffer yes
border_margin 1
use_spacer none
use_xft yes

update_interval 1.0

draw_shades no

draw_outline no
draw_borders no

xftfont ae_AlMothnna:size=7
#default_color fff8ee

alignment top_right

text_buffer_size 1600

minimum_size 270 10
maximum_width 270
gap_x 60
gap_y 20

default_bar_size 0 2


TEXT
${color c88034}${font StyleBats:size=16:weight=bold}H$font ${font ae_AlMothnna:size=12:weight=bold}${voffset -8}Systém$font
${color c88034}${voffset -5}${hr 2}${color}
cpu: ${alignr}${cpubar 2,230}
ram: ${alignr}${membar 2,230}
swap:${alignr}${swapbar 2,230}
${goto 5}Procesů: ${goto 84}$running_processes / $processes ${goto 148}RAM: ${alignr}$mem / $memmax
${voffset -6}$stippled_hr

#CPU
${color c88034}$font${goto 20}${font ae_AlMothnna:size=9:weight=bold}${voffset -8}CPU$stippled_hr$font${color}
${goto 5}${font ae_AlMothnna:size=7:weight=bold}Jméno${goto 79}CPU [%]${goto 137}Čtení${goto 193}Zápis${alignr}PID$font
${goto 5}${top name 1}${goto 89}${top cpu 1}${goto 137}${top io_read 1}/s${goto 193}${top io_write 1}/s${alignr}${top pid 1}
${goto 5}${top name 2}${goto 89}${top cpu 2}${goto 137}${top io_read 2}/s${goto 193}${top io_write 2}/s${alignr}${top pid 2}
${goto 5}${top name 3}${goto 89}${top cpu 3}${goto 137}${top io_read 3}/s${goto 193}${top io_write 3}/s${alignr}${top pid 3}
${goto 5}${top name 4}${goto 89}${top cpu 4}${goto 137}${top io_read 4}/s${goto 193}${top io_write 4}/s${alignr}${top pid 4}

#RAM
${color c88034}$font${goto 20}${font ae_AlMothnna:size=9:weight=bold}${voffset -8}RAM$stippled_hr$font${color}
#${goto 5}${font ae_AlMothnna:size=7:weight=bold}RAM: $font ${goto 38}${top_mem name 1}${goto 193}${top_mem mem_res 1}
${goto 5}${font ae_AlMothnna:size=7:weight=bold}Jméno${goto 79}CPU [%]${goto 137}IO [%]${goto 193}RAM${alignr}PID$font
${goto 5}${top_mem name 1}${goto 89}${top_mem cpu 1}${goto 137}${top_mem io_perc 1}${goto 193}${top_mem mem_res 1}${alignr}${top pid 1}
${goto 5}${top_mem name 2}${goto 89}${top_mem cpu 2}${goto 137}${top_mem io_perc 2}${goto 193}${top_mem mem_res 2}${alignr}${top pid 2}

#IO
${color c88034}$font${goto 20}${font ae_AlMothnna:size=9:weight=bold}${voffset -8}IO operace$stippled_hr$font${color}
#Čtení:${goto 55}Zápis:${goto 110}Vlákno:
#${execi 1 iotop -bn 1 | grep % | sed 1q | awk '{print $4,$5,"  ",$6,$7,"  ",$12}'}
${goto 5}${font ae_AlMothnna:size=7:weight=bold}Jméno${goto 79}CPU [%]${goto 137}Čtení${goto 193}Zápis${alignr}PID$font
${goto 5}${top_io name 1}${goto 89}${top_io cpu 1}${goto 137}${top_io io_read 1}/s${goto 193}${top_io io_write 1}/s${alignr}${top_io pid 1}
${goto 5}${top_io name 2}${goto 89}${top_io cpu 2}${goto 137}${top_io io_read 2}/s${goto 193}${top_io io_write 2}/s${alignr}${top_io pid 2}

#ODDIL HDD
${color c88034}${font StyleBats:size=16}J$font ${font ae_AlMothnna:size=12:weight=bold}${voffset -8}HDD$font
${color c88034}${voffset -5}${hr 2}${color}
${diskiograph_read log 15,133 000000 c88034}${alignr}${diskiograph_write log 15,133 000000 c88034}$color${voffset -20}
${goto 10}Čtení:${goto 50}${diskio_read}/s${goto 147}Zápis:${goto 187}${diskio_write}/s
${voffset -4}
${goto 8}${color c88034}${fs_bar 16 /}${color}
${goto 11}${voffset -21}${font ae_AlMothnna:size=8:weight=bold}root$font ${goto 90}(${fs_size /})${goto 160}${fs_free_perc /}%${goto 200}${fs_free /}
${goto 8}${color c88034}${fs_bar 16 /home}${color}
${goto 11}${voffset -21}${font ae_AlMothnna:size=8:weight=bold}home$font ${goto 90}(${fs_size /home}${goto 160}${fs_free_perc /home}%${goto 200}${fs_free /home}
${if_existing /media/truecrypt1}${goto 8}${color c88034}${fs_bar 16 /media/truecrypt1}${color}
${goto 11}${voffset -21}${font ae_AlMothnna:size=8:weight=bold}truecrypt1$font ${goto 90}(${fs_size /media/truecrypt1})${goto 160}${fs_free_perc /media/truecrypt1}%${goto 200}${fs_free /media/truecrypt1} ${endif}
${if_existing /media/truecrypt2}${goto 8}${color c88034}${fs_bar 16 /media/truecrypt2}${color}
${goto 11}${voffset -21}${font ae_AlMothnna:size=8:weight=bold}truecrypt2$font ${goto 90}(${fs_size /media/truecrypt2})${goto 160}${fs_free_perc /media/truecrypt2}%${goto 200}${fs_free /media/truecrypt2} ${endif}
${if_existing /media/truecrypt3}${goto 8}${color c88034}${fs_bar 16 /media/truecrypt3}${color}
${goto 11}${voffset -21}${font ae_AlMothnna:size=8:weight=bold}truecrypt3$font ${goto 90}(${fs_size /media/truecrypt3})${goto 160}${fs_free_perc /media/truecrypt3}%${goto 200}${fs_free /media/truecrypt3}${endif}

#ODDIL SIT
${color c88034}${font BulletBalls AOE:size=16}i$font ${font ae_AlMothnna:size=12:weight=bold}${voffset -8}Síť$font
${color c88034}${voffset -5}${hr 2}${color}
${if_existing /sys/class/net/eth0/operstate up}IP (eth0):${goto 147}${addr eth0}${voffset 2}
${downspeedgraph eth0 28,133 000000 c88034} ${alignr}${upspeedgraph eth0 28,133 000000 c88034}$color
${voffset -33}${goto 10}Stahování: ${downspeed eth0}/s ${goto 147}Odesílání: ${upspeed eth0}/s
${goto 10}Celkem: ${totaldown eth0} ${goto 147} Celkem: ${totalup eth0}${endif}${if_existing /sys/class/net/wlan0/operstate up}IP (wlan0):${goto 147}${addr wlan0}${voffset 2}
${downspeedgraph wlan0 28,133 000000 c88034} ${alignr}${upspeedgraph wlan0 28,133 000000 c88034}$color
${voffset -33}${goto 10}Stahování: ${downspeed wlan0}/s ${goto 147}Odesílání: ${upspeed wlan0}/s
${goto 10}Celkem: ${totaldown wlan0} ${goto 147}Celkem: ${totalup wlan0}${endif}${if_existing /sys/class/net/ppp0/operstate}IP (ppp0):${goto 147}${addr ppp0}${voffset 2}
${downspeedgraph ppp0 28,133 000000 c88034} ${alignr}${upspeedgraph ppp0 28,133 000000 c88034}$color
${voffset -33}${goto 10}Stahování: ${downspeed ppp0}/s ${goto 147}Odesílání: ${upspeed ppp0}/s
${goto 10}Celkem: ${totaldown ppp0} ${goto 147}Celkem: ${totalup ppp0}${endif}${if_existing /sys/class/net/bnep0/operstate}IP (bnep0):${goto 147}${addr bnep0}${voffset 2}
${downspeedgraph bnep0 28,133 000000 c88034} ${alignr}${upspeedgraph bnep0 28,133 000000 c88034}$color
${voffset -33}${goto 10}Stahování: ${downspeed bnep0}/s ${goto 147}Odesílání: ${upspeed bnep0}/s
${goto 10}Celkem: ${totaldown bnep0} ${goto 147}Celkem: ${totalup bnep0}${endif}

# ODDIL KURZY MEN
${color c88034}${font BulletBalls AOE:size=16}M$font ${font ae_AlMothnna:size=12:weight=bold}${voffset -8}Kurzy měn$font
${color c88034}${voffset -5}${hr 2}${color}
${texeci 3600 ~/.conky/rates.pl}
RHYTHMBOX:

Kód: [Vybrat]

# Xft?
use_xft yes
xftfont cure:size=6
xftfont ae_AlMothnna:size=7

# Force UTF8? note that UTF8 support required XFT
override_utf8_locale yes

uppercase no
#default_color fff8ee

stippled_borders 0
border_inner_margin 6
border_width 0
use_spacer none
double_buffer yes
text_buffer_size 1600

own_window yes
own_window_type normal
own_window_transparent yes
own_window_argb_visual yes
own_window_hints undecorated,below,skip_taskbar,skip_pager,sticky

alignment bottom_right
gap_x 60
gap_y 0
minimum_size 270 10
maximum_width 270
default_bar_size 205 2

draw_shades no
draw_outline no
draw_borders no

update_interval 3.0




TEXT
${if_running rhythmbox}${color c88034}${font BulletBalls AOE:size=16}${exec conkyRhythmbox --statustext=X,O,O --datatype=ST}$font ${font ae_AlMothnna:size=12:weight=bold}${voffset -8}Rhythmbox$font
#${if_running rhythmbox}${color c88034}${font Webdings:size=16}${exec conkyRhythmbox --statustext=4,;,O --datatype=ST}$font ${font ae_AlMothnna:size=12:weight=bold}${voffset -8}Rhythmbox$font
${color c88034}${voffset -5}${hr 2}${color}
${execp conkyRhythmbox -t ~/.conkyRhythmbox_template -n}${goto 70}${voffset -12}${execbar conkyRhythmbox --datatype=PP}
${exec rm /tmp/Rh_cover}
${exec cp "`conkyRhythmbox --datatype=CA | sed -e 's/\%20/\ /g;s/%C3%A1/á/g;s/%C5%A0/Š/g;s/%C4%9B/ě/g;s/%C3%AD/í/g;s/%C5%BE/ž/g;s/%C5%A1/š/g;s/%C4%8D/č/g;s/%C4%8C/Č/g;s/%C3%A9/é/g;s/%C5%99/ř/g;s/\\\//g;s/%5B/[/g;s/%5D/]/g'`" /tmp/Rh_cover}${image /tmp/Rh_cover -p 0,28 -s 74x74 -f 2}${endif}

CONKYRHYTHMBOX TEMPLATE:

Kód: [Vybrat]

${goto 88}${color dimgray}Umělec:
${goto 92}${color white}${font URW Gothic L:size=9}[--datatype=AR]
${goto 88}${font}${color dimgray}Album:
${goto 92}${color white}${font URW Gothic L:size=9}[--datatype=AL]${font}
${goto 88}${color dimgray}Název:
${goto 92}${color white}${font URW Gothic L:size=9}[--datatype=TI]
${color white}${font URW Gothic L:size=8}[--datatype=PT]/[--datatype=LE]${font}
Je potreba conkyRhythmbox http://ubuntuforums.org/showthread.php?p=5843297 a pro kurzy men jeste udelatko s navodem na Wiky.

[Šuohob]

Parada. Jsem spokojen:-). Diky.
(Pozdeji take pripojim sve Conky, ale jeste je ve stadiu uprav a nachazi se ve stavu znacne rozborenem)
Rekonstrukce ukoncena. Vstup na staveniste povolen:


Uploaded with ImageShack.us

Mohu se zeptat, jak delas vypis aktivnich sitovych spojeni? netstat?

[Bum]

Parada. Jsem spokojen:-). Diky.
(Pozdeji take pripojim sve Conky, ale jeste je ve stadiu uprav a nachazi se ve stavu znacne rozborenem)
Rekonstrukce ukoncena. Vstup na staveniste povolen:


Uploaded with ImageShack.us

Mohu se zeptat, jak delas vypis aktivnich sitovych spojeni? netstat?

Alebo este lepsie - Mozes pripojit conky.rc?

[pim]

Presne tak. Netstat.
Protoze zpracovani netstat je celkem pomale a exec je narocny na systemove zdroje, rozdelil jsem conky na vic casti s ruznymi rychlostmi prekreslovani.
Conkyrc pridana do puvodniho prispevku.

Muzete mi jeste poradit?

Pro zobrazeni obalu alba pouzivam conkyRhythmbox.py (http://ubuntuforums.org/showthread.php?p=5843297) a i conkyrc vychazi z jednoho rc stazeneho z webu. Tam ovsem nemel problemy s ceskymi znaky. Zatim pouzivam na prevod sed, ale je to takovy bastl. Lze znakovou sadu prevest elegantneji pomoci iconv nebo neceho podobneho? Zatim jsem v tom neuspel.

[M2-player]

celá veľkosť (aby som vám ušetril čas : http://cucaj.sk/images/uimgs/7/jvbvxlk2gg50.png

Zatiaľ to u mňa vyzerá takto

[Šuohob]

Pekne to mas
docela se mi libi ty grafy pod tim. to jsou conky, nebo screenlets, nebo co vlastne? pokud to conky jsou, mohl bych pozadat o .conkyrc?

[GdH]

Pekne to mas
docela se mi libi ty grafy pod tim. to jsou conky, nebo screenlets, nebo co vlastne? pokud to conky jsou, mohl bych pozadat o .conkyrc?

Conky podporuje skripty psané v Lua a s tím se dají dělat takovéhle grafické opičárny

[mrstevo]

stretol sa uz niekto s takymto problemom?

Kód: [Vybrat]

mrstevo@mrstevo-desktop:~$ conky
Conky: /home/mrstevo/.conkyrc: 2: no such configuration: 'window'
Conky: /home/mrstevo/.conkyrc: 3: no such configuration: 'CPU2:'
Conky: /home/mrstevo/.conkyrc: 4: no such configuration: 'lor'
Conky: /home/mrstevo/.conkyrc: 5: no such configuration: ')'
Conky: /home/mrstevo/.conkyrc: 6: no such configuration: ';action=.xml'
Conky: missing text block in configuration; exiting
***** Imlib2 Developer Warning ***** :
This program is calling the Imlib call:

imlib_context_free();

With the parameter:

context

being NULL. Please fix your program.

pri doplnení pred text

Kód: [Vybrat]

ut_to_x no


Kód: [Vybrat]

mrstevo@mrstevo-desktop:~$ conky
Conky: /home/mrstevo/.conkyrc: 2: no such configuration: 'window'
Conky: /home/mrstevo/.conkyrc: 3: no such configuration: 'CPU2:'
Conky: /home/mrstevo/.conkyrc: 4: no such configuration: 'lor'
Conky: /home/mrstevo/.conkyrc: 5: no such configuration: ')'
Conky: /home/mrstevo/.conkyrc: 6: no such configuration: ';action=.xml'
nevie niekto kde moze byt chyba?

moje conky:

Kód: [Vybrat]

out_to_x no
stippled_borders 0
border_margin 6
border_width 1
on_bottom yes
background yes
double_buffer yes
use_spacer right
use_xft yes
update_interval 3.0
minimum_size 200 5
draw_shades no
draw_outline no # amplifies text if yes
draw_borders no
xftfont anorexia:size=10
uppercase no # set to yes if you want all text to be in uppercase
default_color 00FF00
#Use Xft?
use_xft yes
xftfont DejaVu Sans:size=9
xftalpha 0.8
text_buffer_size 2048
alignment bottom_right
#gap_x 10
#gap_y 40
gap_x 300
gap_y 10
own_window yes
own_window_type override
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager

TEXT

${color 00FF00}Date & Time ${hr 2}
${color 00FF00}${alignc}${font Andale_Mono:size=17}${time %H:%M}${font}
    ${color 00FF00}${alignc}${Time %A %m %d %Y}
Core 1: ${color FFFF00} ${execi 1 sensors | grep "Core 0" | cut -c15-18}C ${alignr}${color 00FF00}Core 2: ${color FFFF00}${execi 1 sensors | grep "Core 1" | cut -c15-18}C
${color 00FF00}CPU1: ${cpu cpu0}% ${alignr} CPU2: ${cpu cpu1}%
${cpubar cpu0 10,170} ${alignr}${cpubar cpu0 10,170}

${color 00FF00}NVidia GPU Temp ${alignr}   Hard Drive Temp ${execi 300 nc localhost 7634 | cut -c37-30 ;}
${color FFFF00} ${execi 30 nvidia-settings -q gpucoretemp |grep '):' | awk '{print $4}'} C ${alignr} ${color FFFF00}${hddtemp /dev/sda localhost 7634}
${color 00FF00}${voffset -5}${hr 1}${color}
${color 00FF00}${top name 1}${color FFFF00}${top cpu 1} ${alignr}${color 00FF00}${top_mem name 1}${color FFFF00}${top_mem mem_res 1}
${color 00FF00}${top name 2}${color FFFF00}${top cpu 2} ${alignr}${color 00FF00}${top_mem name 2}${color FFFF00}${top_mem mem_res 2}
${color 00FF00}${voffset -5}${hr 1}${color}
${color 00FF00}RAM: ${alignc}  $mem ${alignr}  max: $memmax
${color 00FF00}${membar 6}$color
${color 00FF00}Swap: ${alignc} $swap  ${alignr}  max: $swapmax
${color 00FF00}${swapbar 6}$color
${color 00FF00}HDD Ubuntu :  ${fs_free /}  ${alignr} ${fs_used /} / ${fs_size /}
${fs_bar 6 /}$color
${color #00FF00}Network (IP : ${addr eth0}) :$font
Down: ${totaldown eth0} (${downspeed eth0}k/s) ${alignr}Up: ${totalup eth0} (${upspeed 0}k/s)
${color orange}${rss http://rss.sme.sk/rss/rss.asp?sek=smeonline 5 feed_title} ${hr 1}$color
${color 00FF00}${rss http://rss.sme.sk/rss/rss.asp?sek=smeonline 5 item_titles 5}
${color orange}${rss http://www.zive.cz/rss/sc-47/default.aspx 5 feed_title} ${hr 1}$color
${color 00FF00}${rss http://www.zive.cz/rss/sc-47/default.aspx 5 item_titles 5}
${color orange}${rss http://forum.ubuntu.cz/index.php?type=rss;action=.xml 5 feed_title} ${hr 1}$color
${color 00FF00}${rss http://forum.ubuntu.cz/index.php?type=rss;action=.xml 5 item_titles 5}








[M2-player]

Pekne to mas
docela se mi libi ty grafy pod tim. to jsou conky, nebo screenlets, nebo co vlastne? pokud to conky jsou, mohl bych pozadat o .conkyrc?

GdH napísal správne, jedná sa o script v Lua

conkyrc

Kód: [Vybrat]

# Conky settings #
background no
update_interval 1

cpu_avg_samples 2
net_avg_samples 2

override_utf8_locale yes

double_buffer yes
no_buffers yes

text_buffer_size 2048
#imlib_cache_size 0

temperature_unit fahrenheit

# Window specifications #

own_window yes
own_window_type override
own_window_transparent yes
own_window_hints undecorate,sticky,skip_taskbar,skip_pager,below

border_inner_margin 0
border_outer_margin 0

minimum_size 200 250
maximum_width 200

alignment tr
gap_x 5
gap_y 15

# Graphics settings #
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders no

# Text settings #
use_xft yes
xftfont caviar dreams:size=8
xftalpha 0.5

uppercase no

temperature_unit celsius


lua_load ~/.conky_scripts/clock_rings.lua
lua_draw_hook_pre clock_rings

TEXT
   ${font StyleBats:size=18}P${font}   Uptime:  ${uptime_short}
   ${font StyleBats:size=18}4${font}   ${time %A %d %B}

   ${font FreeSans:size=16}@${font}   e-mail:  ${execi 100 bash ~/.conky_scripts/gmail.sh}


   ${font PizzaDude Bullets:size=16}v${font}   Up.      ${upspeed eth0}/s
   ${font PizzaDude Bullets:size=16}r${font}   Dow.   ${downspeed eth0}/s

   ${font PizzaDude Bullets:size=16}M${font}   Odos.   ${totalup eth0}
   ${font PizzaDude Bullets:size=16}S${font}   Prijat.   ${totaldown eth0}
   
     ${font weather:size=28}z ${font}CPU ${acpitemp} °C

   ${font StyleBats:size=18}A${font}   CPU:  ${cpu}%
   ${font PizzaDude Bullets:size=16}J${font}   $memperc%  ${membar 4, 75}
                   $mem / $memmax
















${color 3399FF}${voffset 6}${sysname}${alignr}${kernel}${machine}

${color FFFFFF}${goto 25}${voffset 35}${cpu cpu0}%
${color 3399FF}${goto 25}CPU
${color FFFFFF}${goto 50}${voffset 23}${memperc}%
${color 3399FF}${goto 50}RAM
${color FFFFFF}${goto 75}${voffset 23}${swapperc}%
${color 3399FF}${goto 75}SWAP
${color FFFFFF}${goto 100}${voffset 23}${fs_used_perc /}%
${color 3399FF}${goto 100}Disk
${color FFFFFF}${goto 120}${voffset 25}$battery_percent %
${color 3399FF}${goto 110}Battery
Lua script

Kód: [Vybrat]

--[[
Clock Rings by londonali1010 (2009) Edited by jpope

This script draws percentage meters as rings, and also draws clock hands if you want! It is fully customisable; all options are described in the script. This script is based off a combination of my clock.lua script and my rings.lua script.

IMPORTANT: if you are using the 'cpu' function, it will cause a segmentation fault if it tries to draw a ring straight away. The if statement on line 145 uses a delay to make sure that this doesn't happen. It calculates the length of the delay by the number of updates since Conky started. Generally, a value of 5s is long enough, so if you update Conky every 1s, use update_num>5 in that if statement (the default). If you only update Conky every 2s, you should change it to update_num>3; conversely if you update Conky every 0.5s, you should use update_num>10. ALSO, if you change your Conky, is it best to use "killall conky; conky" to update it, otherwise the update_num will not be reset and you will get an error.

To call this script in Conky, use the following (assuming that you save this script to ~/scripts/rings.lua):
    lua_load ~/scripts/clock_rings.lua
    lua_draw_hook_pre clock_rings
   
Changelog:
+ v1.0 -- Original release (30.09.2009)
   v1.1p -- Jpope edit (05.10.2009)
]]

settings_table = {
    {
        -- Edit this table to customise your rings.
        -- You can create more rings simply by adding more elements to settings_table.
        -- "name" is the type of stat to display; you can choose from 'cpu', 'memperc', 'fs_used_perc', 'battery_used_perc'.
        name='time',
        -- "arg" is the argument to the stat type, e.g. if in Conky you would write ${cpu cpu0}, 'cpu0' would be the argument. If you would not use an argument in the Conky variable, use ''.
        arg='%I.%M',
        -- "max" is the maximum value of the ring. If the Conky variable outputs a percentage, use 100.
        max=12,
        -- "bg_colour" is the colour of the base ring.
        bg_colour=0xffffff,
        -- "bg_alpha" is the alpha value of the base ring.
        bg_alpha=0.1,
        -- "fg_colour" is the colour of the indicator part of the ring.
        fg_colour=0x3399cc,
        -- "fg_alpha" is the alpha value of the indicator part of the ring.
        fg_alpha=0.2,
        -- "x" and "y" are the x and y coordinates of the centre of the ring, relative to the top left corner of the Conky window.
        x=100, y=450,
        -- "radius" is the radius of the ring.
        radius=50,
        -- "thickness" is the thickness of the ring, centred around the radius.
        thickness=5,
        -- "start_angle" is the starting angle of the ring, in degrees, clockwise from top. Value can be either positive or negative.
        start_angle=0,
        -- "end_angle" is the ending angle of the ring, in degrees, clockwise from top. Value can be either positive or negative, but must be larger than start_angle.
        end_angle=360
    },
    {
        name='time',
        arg='%M.%S',
        max=60,
        bg_colour=0xffffff,
        bg_alpha=0.1,
        fg_colour=0x3399cc,
        fg_alpha=0.4,
        x=100, y=450,
        radius=56,
        thickness=5,
        start_angle=0,
        end_angle=360
    },
    {
        name='time',
        arg='%S',
        max=60,
        bg_colour=0xffffff,
        bg_alpha=0.1,
        fg_colour=0x3399cc,
        fg_alpha=0.6,
        x=100, y=450,
        radius=62,
        thickness=5,
        start_angle=0,
        end_angle=360
    },
    {
        name='time',
        arg='%d',
        max=31,
        bg_colour=0xffffff,
        bg_alpha=0.1,
        fg_colour=0x3399cc,
        fg_alpha=0.8,
        x=100, y=450,
        radius=70,
        thickness=5,
        start_angle=-90,
        end_angle=90
    },
    {
        name='time',
        arg='%m',
        max=12,
        bg_colour=0xffffff,
        bg_alpha=0.1,
        fg_colour=0x3399cc,
        fg_alpha=1,
        x=100, y=450,
        radius=76,
        thickness=5,
        start_angle=-90,
        end_angle=90
    },
    {
        name='cpu',
        arg='cpu0',
        max=100,
        bg_colour=0xffffff,
        bg_alpha=0.2,
        fg_colour=0xFF7100,
        fg_alpha=0.4,
        x=50, y=598,
        radius=25,
        thickness=5,
        start_angle=-90,
        end_angle=180
    },
    {
        name='memperc',
        arg='',
        max=100,
        bg_colour=0xffffff,
        bg_alpha=0.2,
        fg_colour=0x33ccff,
        fg_alpha=0.8,
        x=75, y=648,
        radius=25,
        thickness=5,
        start_angle=-90,
        end_angle=180
    },
    {
        name='swapperc',
        arg='',
        max=100,
        bg_colour=0xffffff,
        bg_alpha=0.2,
        fg_colour=0x33ccff,
        fg_alpha=0.8,
        x=100, y=698,
        radius=25,
        thickness=5,
        start_angle=-90,
        end_angle=180
    },
    {
        name='fs_used_perc',
        arg='/',
        max=100,
        bg_colour=0xffffff,
        bg_alpha=0.2,
        fg_colour=0x3399cc,
        fg_alpha=0.3,
        x=125, y=748,
        radius=25,
        thickness=5,
        start_angle=-90,
        end_angle=180
    },
        {
        name='battery_percent',
        arg='BAT0',
        max=100,
        bg_colour=0x36FF33,
        bg_alpha=0.2,
        fg_colour=0x36FF33,
        fg_alpha=0.3,
        x=150, y=798,
        radius=25,
        thickness=4,
        start_angle=-90,
        end_angle=180
    },
}

-- Use these settings to define the origin and extent of your clock.

clock_r=65

-- "clock_x" and "clock_y" are the coordinates of the centre of the clock, in pixels, from the top left of the Conky window.

clock_x=100
clock_y=450

show_seconds=true

require 'cairo'

function rgb_to_r_g_b(colour,alpha)
    return ((colour / 0x10000) % 0x100) / 255., ((colour / 0x100) % 0x100) / 255., (colour % 0x100) / 255., alpha
end

function draw_ring(cr,t,pt)
    local w,h=conky_window.width,conky_window.height
   
    local xc,yc,ring_r,ring_w,sa,ea=pt['x'],pt['y'],pt['radius'],pt['thickness'],pt['start_angle'],pt['end_angle']
    local bgc, bga, fgc, fga=pt['bg_colour'], pt['bg_alpha'], pt['fg_colour'], pt['fg_alpha']

    local angle_0=sa*(2*math.pi/360)-math.pi/2
    local angle_f=ea*(2*math.pi/360)-math.pi/2
    local t_arc=t*(angle_f-angle_0)

    -- Draw background ring

    cairo_arc(cr,xc,yc,ring_r,angle_0,angle_f)
    cairo_set_source_rgba(cr,rgb_to_r_g_b(bgc,bga))
    cairo_set_line_width(cr,ring_w)
    cairo_stroke(cr)
   
    -- Draw indicator ring

    cairo_arc(cr,xc,yc,ring_r,angle_0,angle_0+t_arc)
    cairo_set_source_rgba(cr,rgb_to_r_g_b(fgc,fga))
    cairo_stroke(cr)       
end

function draw_clock_hands(cr,xc,yc)
    local secs,mins,hours,secs_arc,mins_arc,hours_arc
    local xh,yh,xm,ym,xs,ys
   
    secs=os.date("%S")   
    mins=os.date("%M")
    hours=os.date("%I")
       
    secs_arc=(2*math.pi/60)*secs
    mins_arc=(2*math.pi/60)*mins+secs_arc/60
    hours_arc=(2*math.pi/12)*hours+mins_arc/12
       
    -- Draw hour hand
   
    xh=xc+0.7*clock_r*math.sin(hours_arc)
    yh=yc-0.7*clock_r*math.cos(hours_arc)
    cairo_move_to(cr,xc,yc)
    cairo_line_to(cr,xh,yh)
   
    cairo_set_line_cap(cr,CAIRO_LINE_CAP_ROUND)
    cairo_set_line_width(cr,5)
    cairo_set_source_rgba(cr,0.2,0.6,1,0.4)
    cairo_stroke(cr)
   
    -- Draw minute hand
   
    xm=xc+clock_r*math.sin(mins_arc)
    ym=yc-clock_r*math.cos(mins_arc)
    cairo_move_to(cr,xc,yc)
    cairo_line_to(cr,xm,ym)
   
    cairo_set_line_width(cr,3)
    cairo_stroke(cr)
   
    -- Draw seconds hand
   
    if show_seconds then
        xs=xc+clock_r*math.sin(secs_arc)
        ys=yc-clock_r*math.cos(secs_arc)
        cairo_move_to(cr,xc,yc)
        cairo_line_to(cr,xs,ys)
   
        cairo_set_line_width(cr,1)
        cairo_stroke(cr)
    end
end

function conky_clock_rings()
    local function setup_rings(cr,pt)
        local str=''
        local value=0
       
        str=string.format('${%s %s}',pt['name'],pt['arg'])
        str=conky_parse(str)
       
        value=tonumber(str)
        pct=value/pt['max']
       
        draw_ring(cr,pct,pt)
    end
   
    -- Check that Conky has been running for at least 5s

    if conky_window==nil then return end
    local cs=cairo_xlib_surface_create(conky_window.display,conky_window.drawable,conky_window.visual, conky_window.width,conky_window.height)
   
    local cr=cairo_create(cs)   
   
    local updates=conky_parse('${updates}')
    update_num=tonumber(updates)
   
    if update_num>5 then
        for i in pairs(settings_table) do
            setup_rings(cr,settings_table[i])
        end
    end
   
    draw_clock_hands(cr,clock_x,clock_y)
end
Ja to mám síce v kope, ale bolo by to lepšie, keby conky (to horné biele) a lua+conky boli ako 2 conky (kvôli ľahšiemu modifikovaniu alebo presúvaniu).

[Drtikol]

Taky se přidám se svými conky


Uploaded with ImageShack.us

Čerpal jsem jen z wiki a hlavně tady z fóra, takže díky všem

Pro zájemce conkyrc:

Kód: [Vybrat]

stippled_borders 0
border_margin 6
border_width 0

own_window yes
own_window_type override
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager

double_buffer yes

use_spacer right
use_xft yes
xftfont ae_AlMothnna:size=7
text_buffer_size 2048

update_interval 2.0

draw_shades no
draw_outline no
draw_borders no

uppercase no

#default_color 000000

alignment top_right

gap_x 15
gap_y 40

color0 FFFFFF
color1 000000

TEXT
#SYSTEM
${color 000000}${font openlogos:size=16}u$font ${font Radio Space:size=14:weight=bold}${voffset -8}System$font
${color 000000}${voffset -5}${hr 2}${color}
${alignc}Ubuntu 10.04 Lucid Linx
${alignc}$sysname $kernel on $machine
${alignc}Uptime: $uptime
#CPU
${color 000000}cpu1: ${cpu cpu0}% ${alignr}${cpubar cpu0 2,210}
cpu2: ${cpu cpu1}% ${alignr}${cpubar cpu0 2,210}
ram: ${alignr}${membar 2,210}
#PROCESES
${goto 5}Procesů: ${goto 84}$running_processes / $processes ${goto 148}RAM: ${alignr}$mem / $memmax
${voffset -6}$stippled_hr
${goto 5}${color ffffff}${font ae_AlMothnna:size=7:weight=bold}Jméno${goto 89}CPU [%]${goto 148}Jméno${alignr}RAM$font ${color 000000}
${goto 5}${top name 1}${goto 99}${top cpu 1}     ${goto 148}${top_mem name 1}${alignr}${top_mem mem_res 1}
${goto 5}${top name 2}${goto 99}${top cpu 2}     ${goto 148}${top_mem name 2}${alignr}${top_mem mem_res 2}
${goto 5}${top name 3}${goto 99}${top cpu 3}     ${goto 148}${top_mem name 3}${alignr}${top_mem mem_res 3}
${goto 5}${top name 4}${goto 99}${top cpu 4}     ${goto 148}${top_mem name 4}${alignr}${top_mem mem_res 4}

#HDD
${color 000000}${font StyleBats:size=16}J$font ${font Radio Space:size=14:weight=bold}${voffset -8}HDD$font
${color 000000}${voffset -5}${hr 2}${color}
${goto 8}${color 000000}${fs_bar 20 /}${color}
${goto 11}${voffset -21}${font ae_AlMothnna:size=8:weight=bold}root$font ${goto 90}(${fs_size /})${goto 160}${fs_free_perc /}%${goto 200}${fs_free /}${voffset 2}
${goto 8}${color 000000}${fs_bar 20 /home}${color}
${goto 11}${voffset -21}${font ae_AlMothnna:size=8:weight=bold}home$font ${goto 90}(${fs_size /home}${goto 160}${fs_free_perc /home}%${goto 200}${fs_free /home} ${voffset 2}
${goto 8}${color 000000}${fs_bar 20 /media/My Book}${color}
${goto 11}${voffset -21}${font ae_AlMothnna:size=8:weight=bold}My Book$font ${goto 90}(${fs_size /media/My Book}${goto 160}${fs_free_perc /media/My Book}%${goto 200}${fs_free /media/My Book} ${voffset 2}

#NETWORK
${color 000000}${font StyleBats:size=16}o$font ${font Radio Space:size=14:weight=bold}${voffset -8}Network$font
${color 000000}${voffset -5}${hr 2}
IP addres:${alignr}${addr eth0}
Down: ${downspeed eth0} ${alignr}Up:  ${upspeed eth0}
Down: ${totaldown eth0} ${alignr}Up:  ${totalup eth0}

#DATE AND TIME
${color 000000}${font StyleBats:size=16}g$font ${font Radio Space:size=14:weight=bold}${voffset -8}Date and time$font
${color 000000}${voffset -5}${hr 2}
${font Radio Space:size=27}${alignc}${time %H:%M}${font}

${color 000000}${font ae_AlMothnna:size=9:weight=bold}${execi 60 date +"%B %Y" | tr "[:upper:]" "[:lower:]"}${font Snap.se:size=8}
${voffset -6}$stippled_hr
#KALENDER
$color${font Bitstream Vera Sans Mono:style=Bold:size=10}${execpi 3600 cal | awk 'NR>1' | sed -e 's/   /    /g' -e 's/[^ ] /& /g' -e 's/..*/  & /' -e 's/ \('`date | awk '{print $3}'`'\) /\ $\{color 000000\}'`date | awk '{print $3}'`'\$color /'}$font$color
#RHYTHMBOX
${if_running rhythmbox}${color 000000}${font StyleBats:size=16}6$font ${font Radio Space:size=14:weight=bold}${voffset -8}Rhythmbox$font${color ffffff}$alignr${exec rhythmbox-client --print-playing-format '%te / %td' --no-start}$color
${color 000000}${voffset -5}${hr 2}
${voffset 3}$alignr${color ffffff}${font sans:size=8}${execi 4 rhythmbox-client --print-playing --no-start}     $endif$color
počasí:

Kód: [Vybrat]

# System Weather

# Create own window instead of using desktop (required in nautilus)
own_window yes
own_window_type override
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
 
# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes
 
# fiddle with window
use_spacer left

# Use Xft?
use_xft yes
xftfont DejaVu Sans:size=8
xftalpha 0.8
text_buffer_size 2048
 
# Update interval in seconds
update_interval 3.0
 
 
# Draw shades?
draw_shades no
 
# Text stuff
draw_outline no # amplifies text if yes
draw_borders no
uppercase no # set to yes if you want all text to be in uppercase
 
# Stippled borders?
stippled_borders 3
 
# border margins
border_margin 9
 
# border width
border_width 10
 
# Default colors
default_color 000000
 
# Text alignment, other possible values are commented
alignment top_left
 
# Gap between borders of screen
gap_x 15
gap_y 40

TEXT
${color 000000}${font weather:size=22:weight=bold}I$font ${font Radio Space:size=14:weight=bold}${voffset -11}${goto 30} Weather$font
${color 000000}${voffset -6}${hr 2}
${texeci 360 ~/.conky/weather.pl EZXX0040 cz m ~/.conky/weather.template ~/.conky/weather.conky}
${execpi 247 cat ~/.conky/weather.conky}weather.pl a weather.template pouze stáhnuté z wiki

[pumpkin]

Ahoj, včera jsem si konečně udělal conky k obrazu svému, ovšem stále mě otravuje občasné přebliknutí (cca co 7-10s). Upravil jsem podle wiki xorg.conf a v .conkyrc mám

Kód: [Vybrat]

double_buffer yes
own_window  yes
own_window_transparent yes
own_window_type normal
own_window_hints undecorate,sticky,skip_taskbar,skip_pager,below
draw_borders no
border_margin 1
draw_shades no
update_interval 2
use_xft yes
use_spacer no
text_buffer_size 1280Nevíte v čem by mohla být chyba? Mám Ubuntu LL 64bit.
Díky

[Roman Vacho]

Taky se přidám se svými conky


Uploaded with ImageShack.us

Čerpal jsem jen z wiki a hlavně tady z fóra, takže díky všem

Máš to dobrý. Jen nechápu tu sabotáž, že máš v konfigu naschvál pár znaků navíc???
A Lucid Linx>Lucid Lynx.

[cmudik]

Máš to dobrý. Jen nechápu tu sabotáž, že máš v konfigu naschvál pár znaků navíc???
A Lucid Linx>Lucid Lynx.

To nebude sabotáž, ale chybí ti nějakej font...

[Roman Vacho]

Máš to dobrý. Jen nechápu tu sabotáž, že máš v konfigu naschvál pár znaků navíc???
A Lucid Linx>Lucid Lynx.

To nebude sabotáž, ale chybí ti nějakej font...

${color 000000}${font openlogos:size=16}u$font ${font Radio Space:size=14:weight=bold}${voffset -8}System$font
Máš recht. Nainstalil jsem asi 10 fontů a pomohlo. Teď už se jen pářu s počasím a doladěním.

[Roman Vacho]

Tak jsem v koncích. Taky nechápu u Drtikola propojení conkyrc a počasí. Z conkyrc nevolá další skript do vlákna. To spouští nějak samostatně?
.conkyrc

Kód: [Vybrat]

stippled_borders 0
border_margin 6
border_width 0

own_window yes
own_window_type override
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager

double_buffer yes

use_spacer right
use_xft yes
xftfont ae_AlMothnna:size=7
text_buffer_size 2048

update_interval 5.0

draw_shades no
draw_outline no
draw_borders no

uppercase no

#default_color 00000

alignment top_right

gap_x 15
gap_y 40

color0 FFFFFF
color1 000000

TEXT
#SYSTEM
${color 000000}${font openlogos:size=16}u$font ${font Radio Space:size=14:weight=bold}${voffset -8}System$font
${color 000000}${voffset -5}${hr 2}${color}
${alignc}Ubuntu 10.04 Lucid Lynx
${alignc}$sysname $kernel on $machine
${alignc}Uptime: $uptime
#CPU
${color 000000}cpu1: ${cpu cpu0}% ${alignr}${cpubar cpu0 2,210}
cpu2: ${cpu cpu1}% ${alignr}${cpubar cpu0 2,210}
ram: ${alignr}${membar 2,210}
#PROCESES
${goto 5}Procesů: ${goto 84}$running_processes / $processes ${goto 148}RAM: ${alignr}$mem / $memmax
${voffset -6}$stippled_hr
${goto 5}${color ffffff}${font ae_AlMothnna:size=7:weight=bold}Jméno${goto 89}CPU [%]${goto 148}Jméno${alignr}RAM$font ${color 000000}
${goto 5}${top name 1}${goto 99}${top cpu 1}     ${goto 148}${top_mem name 1}${alignr}${top_mem mem_res 1}
${goto 5}${top name 2}${goto 99}${top cpu 2}     ${goto 148}${top_mem name 2}${alignr}${top_mem mem_res 2}
${goto 5}${top name 3}${goto 99}${top cpu 3}     ${goto 148}${top_mem name 3}${alignr}${top_mem mem_res 3}
${goto 5}${top name 4}${goto 99}${top cpu 4}     ${goto 148}${top_mem name 4}${alignr}${top_mem mem_res 4}

#HDD
${color 000000}${font StyleBats:size=16}J$font ${font Radio Space:size=14:weight=bold}${voffset -8}HDD$font
${color 000000}${voffset -5}${hr 2}${color}
${goto 8}${color 000000}${fs_bar 20 /}${color}
${goto 11}${voffset -21}${font ae_AlMothnna:size=8:weight=bold}root$font ${goto 90}(${fs_size /})${goto 160}${fs_free_perc /}%${goto 200}${fs_free /}${voffset 2}
${goto 8}${color 000000}${fs_bar 20 /home}${color}
${goto 11}${voffset -21}${font ae_AlMothnna:size=8:weight=bold}home$font ${goto 90}(${fs_size /home}${goto 160}${fs_free_perc /home}%${goto 200}${fs_free /home} ${voffset 2}
#${goto 8}${color 000000}${fs_bar 20 /media/Zaloha}${color}
#${goto 11}${voffset -21}${font ae_AlMothnna:size=8:weight=bold}Zaloha$font ${goto 90}(${fs_size /media/4B05-93CD}${goto 160}${fs_free_perc /media/4B05-93CD}%${goto 200}${fs_free /media/4B05-93CD} ${voffset 2}

#NETWORK
${color 000000}${font StyleBats:size=16}o$font ${font Radio Space:size=14:weight=bold}${voffset -8}Network$font
${color 000000}${voffset -5}${hr 2}
IP addres:${alignr}${addr eth0}
Down: ${downspeed eth0} ${alignr}Up:  ${upspeed eth0}
Down: ${totaldown eth0} ${alignr}Up:  ${totalup eth0}

#DATE AND TIME
${color 000000}${font StyleBats:size=16}g$font ${font Radio Space:size=14:weight=bold}${voffset -8}Date and time$font
${color 000000}${voffset -5}${hr 2}
${font Radio Space:size=27}${alignc}${time %H:%M}${font}

${color 000000}${font ae_AlMothnna:size=9:weight=bold}${execi 60 date +"%B %Y" | tr "[:upper:]" "[:lower:]"}${font Snap.se:size=8}
${voffset -6}$stippled_hr
#KALENDER
$color${font Bitstream Vera Sans Mono:style=Bold:size=10}${execpi 3600 cal | awk 'NR>1' | sed -e 's/   /    /g' -e 's/[^ ] /& /g' -e 's/..*/  & /' -e 's/ \('`date | awk '{print $3}'`'\) /\ $\{color 000000\}'`date | awk '{print $3}'`'\$color /'}$font$color
#QMMP
#${if_running qmmp}${color 000000}${font StyleBats:size=16}6$font ${font Radio Space:size=14:weight=bold}${voffset -8}Qmmp$font${color ffffff}$alignr${exec qmmp --print-playing-format '%te / %td' --no-start}$color
#${color 000000}${voffset -5}${hr 2}
#${voffset 3}$alignr${color ffffff}${font sans:size=8}${execi 4 qmmp --print-playing --no-start}     $endif$color

${texeci 360 ~/.conky/weather.pl Brno cz m ~/.conky/weather.template ~/.conky/weather.conky}
${execpi 247 cat ~/.conky/weather.conky}
weather.pl a weather.template je původní z Wiki.
weather.conky

Kód: [Vybrat]

Počasí $hr
${font bauhaus:pixelsize=9}${alignr 3}( s. š.,  v. d.)
Stav k: :, . . 20 ${alignr 3}Update: :
  
${voffset -5}${goto 20}${Font weather:size=65}
${voffset -70}${goto 13}${Font bauhaus:pixelsize=25}
${voffset -20}${font weather:size=25}${alignr 20}${font bauhaus:pixelsize=9}${voffset -107}
                                 Tlak:  
                                 Vítr:   (˚)
                                 Vlhkost:  %
                                 Rosný bod:
                                 Viditelnost:
                                 UV index:   ()
                                 Východ: :
                                 Západ: :
                                 Měsíc: $font
${voffset -10}Předpověď $stippled_hr
${goto 11}${goto 61}${goto 111}${goto 161}${goto 211}
${font weather:size=25}${goto 8}${goto 58}${goto 108}${goto 158}${goto 208}
${voffset -20}${font bauhaus:pixelsize=9}${goto 5}/${goto 55}/${goto 105}/${goto 155}/${goto 205}/Fonty mám tyto:

Kód: [Vybrat]

ae_almothnna_bold.ttf
Bauhaus.ttf
fonty.txt
openlogos.ttf
Radiofbi.ttf
Radiofb.ttf
Radiofc.ttf
Radiofi.ttf
Radiof.ttf
snap.ttf
STYLBCC_.TTF
VeraMoBd.ttf
VeraMoBI.ttf
VeraMoIt.ttf
VeraMono.ttf
weather.ttfPři spuštění z terminálu tam nic zajímavého není. Stejně si to nedetekuje chybějící font .

Že by? file:///home/rovano/.conky/weather_EZXX0002.xml

Kód: [Vybrat]

<error>
<err type="100">Invalid Partner Code.</err>
</error>
[attachment deleted by admin]

[mrstevo]

stretol sa uz niekto s takymto problemom?

Kód: [Vybrat]

mrstevo@mrstevo-desktop:~$ conky
Conky: /home/mrstevo/.conkyrc: 2: no such configuration: 'window'
Conky: /home/mrstevo/.conkyrc: 3: no such configuration: 'CPU2:'
Conky: /home/mrstevo/.conkyrc: 4: no such configuration: 'lor'
Conky: /home/mrstevo/.conkyrc: 5: no such configuration: ')'
Conky: /home/mrstevo/.conkyrc: 6: no such configuration: ';action=.xml'
Conky: missing text block in configuration; exiting
***** Imlib2 Developer Warning ***** :
This program is calling the Imlib call:

imlib_context_free();

With the parameter:

context

being NULL. Please fix your program.

pri doplnení pred text

Kód: [Vybrat]

ut_to_x no


Kód: [Vybrat]

mrstevo@mrstevo-desktop:~$ conky
Conky: /home/mrstevo/.conkyrc: 2: no such configuration: 'window'
Conky: /home/mrstevo/.conkyrc: 3: no such configuration: 'CPU2:'
Conky: /home/mrstevo/.conkyrc: 4: no such configuration: 'lor'
Conky: /home/mrstevo/.conkyrc: 5: no such configuration: ')'
Conky: /home/mrstevo/.conkyrc: 6: no such configuration: ';action=.xml'
nevie niekto kde moze byt chyba?

moje conky:

Kód: [Vybrat]

out_to_x no
stippled_borders 0
border_margin 6
border_width 1
on_bottom yes
background yes
double_buffer yes
use_spacer right
use_xft yes
update_interval 3.0
minimum_size 200 5
draw_shades no
draw_outline no # amplifies text if yes
draw_borders no
xftfont anorexia:size=10
uppercase no # set to yes if you want all text to be in uppercase
default_color 00FF00
#Use Xft?
use_xft yes
xftfont DejaVu Sans:size=9
xftalpha 0.8
text_buffer_size 2048
alignment bottom_right
#gap_x 10
#gap_y 40
gap_x 300
gap_y 10
own_window yes
own_window_type override
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager

TEXT

${color 00FF00}Date & Time ${hr 2}
${color 00FF00}${alignc}${font Andale_Mono:size=17}${time %H:%M}${font}
    ${color 00FF00}${alignc}${Time %A %m %d %Y}
Core 1: ${color FFFF00} ${execi 1 sensors | grep "Core 0" | cut -c15-18}C ${alignr}${color 00FF00}Core 2: ${color FFFF00}${execi 1 sensors | grep "Core 1" | cut -c15-18}C
${color 00FF00}CPU1: ${cpu cpu0}% ${alignr} CPU2: ${cpu cpu1}%
${cpubar cpu0 10,170} ${alignr}${cpubar cpu0 10,170}

${color 00FF00}NVidia GPU Temp ${alignr}   Hard Drive Temp ${execi 300 nc localhost 7634 | cut -c37-30 ;}
${color FFFF00} ${execi 30 nvidia-settings -q gpucoretemp |grep '):' | awk '{print $4}'} C ${alignr} ${color FFFF00}${hddtemp /dev/sda localhost 7634}
${color 00FF00}${voffset -5}${hr 1}${color}
${color 00FF00}${top name 1}${color FFFF00}${top cpu 1} ${alignr}${color 00FF00}${top_mem name 1}${color FFFF00}${top_mem mem_res 1}
${color 00FF00}${top name 2}${color FFFF00}${top cpu 2} ${alignr}${color 00FF00}${top_mem name 2}${color FFFF00}${top_mem mem_res 2}
${color 00FF00}${voffset -5}${hr 1}${color}
${color 00FF00}RAM: ${alignc}  $mem ${alignr}  max: $memmax
${color 00FF00}${membar 6}$color
${color 00FF00}Swap: ${alignc} $swap  ${alignr}  max: $swapmax
${color 00FF00}${swapbar 6}$color
${color 00FF00}HDD Ubuntu :  ${fs_free /}  ${alignr} ${fs_used /} / ${fs_size /}
${fs_bar 6 /}$color
${color #00FF00}Network (IP : ${addr eth0}) :$font
Down: ${totaldown eth0} (${downspeed eth0}k/s) ${alignr}Up: ${totalup eth0} (${upspeed 0}k/s)
${color orange}${rss http://rss.sme.sk/rss/rss.asp?sek=smeonline 5 feed_title} ${hr 1}$color
${color 00FF00}${rss http://rss.sme.sk/rss/rss.asp?sek=smeonline 5 item_titles 5}
${color orange}${rss http://www.zive.cz/rss/sc-47/default.aspx 5 feed_title} ${hr 1}$color
${color 00FF00}${rss http://www.zive.cz/rss/sc-47/default.aspx 5 item_titles 5}
${color orange}${rss http://forum.ubuntu.cz/index.php?type=rss;action=.xml 5 feed_title} ${hr 1}$color
${color 00FF00}${rss http://forum.ubuntu.cz/index.php?type=rss;action=.xml 5 item_titles 5}








Takze som to vyriesil asi tak, ze som ubuntu preinstaloval... Conky pekne bavilo, ale...Len co som zaeditoval .conkyrc, znova ta ista chyba....Prepisanie zo zalohy, conky znova idu... Zmenu som robil len v zobrazovani IP z eth1 na eth0...nema nieto riesenie zahady?

[Drtikol]

Lucid Linx>Lucid Lynx.

Za tu hrubku se stydím, díky za upozornění

Tak jsem v koncích. Taky nechápu u Drtikola propojení conkyrc a počasí. Z conkyrc nevolá další skript do vlákna. To spouští nějak samostatně?

Počasí spouštím samostatně, mám ho pojmenovaný jako conkyrc1 a conkystart pak vapadá asi takle:

Kód: [Vybrat]

#!/bin/bash

sleep 10 &&
conky -d -c ~/.conkyrc &
sleep 10 &&
conky -d -c ~/.conkyrc1 &
exit


[Moriarty_cz]

Ahojte, měl bych dotaz: co se vlastně myslí tou "opravdovou průhledností"? Postupoval jsem totiž podle tohoto návodu a obrázek na pozadí je vidět skrz Conky, ale ne ikony na ploše. Je to vůbec nějak možné?

Nastavení opravdové průhlednosti okna Conky

Tento režim nefunguje (většinou) při nastavení typu okna na override, je lepší použít výchozí typ normal, desktop zas nefunguje na desktopu spravovaném Nautilem. Je také potřeba kompozitní správce oken, třeba Compiz, ale jde to povolit i v Metacity.
V konfiguračním souboru Conky (.conkyrc defaultně) máte již nejspíš řádek:
 own_window_transparent yes
který povoluje průhlednost okna, do této doby pseudoprůhlednost. K tomu nyní přibývá řádek:
 own_window_argb_visual yes
který z průhlednosti falešné udělá reálnou. Je tu ale ještě jeden, který je možno vložit místo prvního zmíněného a nastavit průhlednost částečnou:
 own_window_argb_value 255
kde parametr je v rozsahu 0-255 a 255 a čím vyšší číslo, tím menší průhlednost. Nefunguje současně s own_window_transparent.
Zde se, alespoň na mém systému, projevuje taková záludnost, kdy se změnou transparentnosti pozadí použitím own_window_argb_value, přichází i transparentnost části obsahu, především grafů a méně barů. I když nepoužiji toto nastavení, jsou grafy lehce průhledné, což koneckonců vypadá docela zajímavě

[Mank]

Myslim si že jedna Applikace , ktera ma co docineni s conky , zde stoji za zmínění
a to ConkyWizard ktery ma zatim Domovske stranky na http://code.google.com/p/conkywizard/

[UfoNet]

Myslim si že jedna Applikace , ktera ma co docineni s conky , zde stoji za zmínění
a to ConkyWizard ktery ma zatim Domovske stranky na http://code.google.com/p/conkywizard/

Vypadá to zajímavě, doufám že to bude mít i angličtinu