Prosíme přihlašte se nebo zaregistrujte.

Přihlašte se svým uživatelským jménem a heslem.
Vaše pomoc je stále potřeba!

Autor Téma: ICQ v Empathy neodešle zprávu  (Přečteno 1803 krát)

rimidalv

  • Aktivní člen
  • *
  • Příspěvků: 317
ICQ v Empathy neodešle zprávu
« kdy: 26 Července 2012, 10:00:04 »
Odinstaloval jsem Kopete s ICQ a nainstaloval jsem Empathy (účet ICQ).
Nyní když když kliknu v menu na Nová konverzace tak se  objeví okno pro psaní zprávy , které po 1 sekundě zmizí.
Jinak zprávy dostávat mohu.

beer

  • Host
Re:ICQ v Empathy neodešle zprávu
« Odpověď #1 kdy: 26 Července 2012, 12:17:08 »
ICQ ještě někdo používá  ???

Máš knihovnu libpurlple?

Vypni empathy, susť ho z terminálu. Pak dej výpis, co to udělalo.

Místo empathy bych doporučil spíše pidgin, empathy jsem se na notebooku zbavil. Nešlo se mi přihlásit do google talk ani skypu po instalaci mireda, neustále se to odhlašovalo a vždy to chtělo znovu heslo.

rimidalv

  • Aktivní člen
  • *
  • Příspěvků: 317
Re:ICQ v Empathy neodešle zprávu
« Odpověď #2 kdy: 26 Července 2012, 18:52:26 »
ICQ skoro vůbec nepoužívám, ale nezrušil jsem ho, Empathy je nainstalované ve zdrojích.
Zkusil jsem to. Vypnul jsem účet ICQ a zadal do terminálu emphaty a objeví se tam  tabulka kontaktů s hláškou přítomen, ale bez konnkrétních kontaktů, účet je stále vypnutý. Když ho zapnu, tak se objeví kontakty, ale nespojím se.

beer

  • Host
Re:ICQ v Empathy neodešle zprávu
« Odpověď #3 kdy: 27 Července 2012, 00:05:21 »
ICQ skoro vůbec nepoužívám, ale nezrušil jsem ho, Empathy je nainstalované ve zdrojích.
Zkusil jsem to. Vypnul jsem účet ICQ a zadal do terminálu emphaty a objeví se tam  tabulka kontaktů s hláškou přítomen, ale bez konnkrétních kontaktů, účet je stále vypnutý. Když ho zapnu, tak se objeví kontakty, ale nespojím se.

A co to psalo v tom terminálu?

rimidalv

  • Aktivní člen
  • *
  • Příspěvků: 317
Re:ICQ v Empathy neodešle zprávu
« Odpověď #4 kdy: 27 Července 2012, 08:36:50 »
Po samotném empathy se v terminálu neobjeví vůbec nic. Když před něj dám  sudo tak se v terminálu objeví:
(empathy:2123): folks-WARNING **: Failed to find primary PersonaStore with type ID 'eds' and ID 'system'.
Individuals will not be linked properly and creating new links between Personas will not work.
The configured primary PersonaStore's backend may not be installed. If you are unsure, check with your distribution.
Zároveň se objeví formulář na nový účet připojení.

Rover623

Re:ICQ v Empathy neodešle zprávu
« Odpověď #5 kdy: 27 Července 2012, 10:02:19 »
Zkus odeslat zprávu a pak v terminálu nahlédni do
Kód: [Vybrat]
dmesg

rimidalv

  • Aktivní člen
  • *
  • Příspěvků: 317
Re:ICQ v Empathy neodešle zprávu
« Odpověď #6 kdy: 27 Července 2012, 10:58:56 »
Kód: [Vybrat]
[    0.097076] pci 0000:01:00.0: reg 14: [mem 0xd8000000-0xdfffffff pref]
[    0.097105] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.097160] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.097168] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe1ffffff]
[    0.097174] pci 0000:00:01.0:   bridge window [mem 0xd8000000-0xdfffffff pref]
[    0.097183] pci_bus 0000:00: on NUMA node 0
[    0.097189] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.097588]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[    0.122969] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
[    0.123107] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
[    0.123246] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5
[    0.123359] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.123465] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.123567] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.123684] ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 6 7 10 11 12)
[    0.123785] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.123954] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *11
[    0.124099] ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
[    0.124227] ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
[    0.124385] ACPI: PCI Interrupt Link [ALKD] (IRQs *23)
[    0.124613] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.124618] vgaarb: loaded
[    0.124620] vgaarb: bridge control possible 0000:01:00.0
[    0.124847] i2c-core: driver [aat2870] using legacy suspend method
[    0.124850] i2c-core: driver [aat2870] using legacy resume method
[    0.125027] SCSI subsystem initialized
[    0.125147] libata version 3.00 loaded.
[    0.125254] usbcore: registered new interface driver usbfs
[    0.125276] usbcore: registered new interface driver hub
[    0.125333] usbcore: registered new device driver usb
[    0.125514] PCI: Using ACPI for IRQ routing
[    0.125521] PCI: pci_cache_line_size set to 32 bytes
[    0.125589] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[    0.125593] reserve RAM buffer: 000000003fff0000 - 000000003fffffff
[    0.125798] NetLabel: Initializing
[    0.125801] NetLabel:  domain hash size = 128
[    0.125804] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.125825] NetLabel:  unlabeled traffic allowed by default
[    0.140145] AppArmor: AppArmor Filesystem Enabled
[    0.140216] pnp: PnP ACPI init
[    0.140250] ACPI: bus type pnp registered
[    0.140513] pnp 00:00: [mem 0x000f0000-0x000f3fff]
[    0.140518] pnp 00:00: [mem 0x000f4000-0x000f7fff]
[    0.140522] pnp 00:00: [mem 0x000f8000-0x000fbfff]
[    0.140526] pnp 00:00: [mem 0x000fc000-0x000fffff]
[    0.140529] pnp 00:00: [mem 0x3fff0000-0x3fffffff]
[    0.140533] pnp 00:00: [mem 0xffff0000-0xffffffff]
[    0.140536] pnp 00:00: [mem 0x00000000-0x0009ffff]
[    0.140540] pnp 00:00: [mem 0x00100000-0x3ffeffff]
[    0.140543] pnp 00:00: [mem 0xfec00000-0xfec00fff]
[    0.140547] pnp 00:00: [mem 0xfee00000-0xfee00fff]
[    0.140551] pnp 00:00: [mem 0xfff80000-0xfffeffff]
[    0.140650] system 00:00: [mem 0x000f0000-0x000f3fff] could not be reserved
[    0.140655] system 00:00: [mem 0x000f4000-0x000f7fff] could not be reserved
[    0.140660] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.140664] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.140669] system 00:00: [mem 0x3fff0000-0x3fffffff] could not be reserved
[    0.140674] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
[    0.140678] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.140683] system 00:00: [mem 0x00100000-0x3ffeffff] could not be reserved
[    0.140687] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.140692] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.140696] system 00:00: [mem 0xfff80000-0xfffeffff] has been reserved
[    0.140704] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.140807] pnp 00:01: [bus 00-ff]
[    0.140812] pnp 00:01: [io  0x0cf8-0x0cff]
[    0.140816] pnp 00:01: [io  0x0000-0x0cf7 window]
[    0.140820] pnp 00:01: [io  0x0d00-0xffff window]
[    0.140824] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[    0.140828] pnp 00:01: [mem 0x000c0000-0x000dffff window]
[    0.140832] pnp 00:01: [mem 0x40000000-0xfebfffff window]
[    0.140913] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.140948] pnp 00:02: [io  0x4000-0x407f]
[    0.140952] pnp 00:02: [io  0x5000-0x500f]
[    0.141010] system 00:02: [io  0x4000-0x407f] has been reserved
[    0.141014] system 00:02: [io  0x5000-0x500f] has been reserved
[    0.141019] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.141688] pnp 00:03: [io  0x0010-0x001f]
[    0.141693] pnp 00:03: [io  0x0022-0x003f]
[    0.141696] pnp 00:03: [io  0x0044-0x005f]
[    0.141700] pnp 00:03: [io  0x0062-0x0063]
[    0.141703] pnp 00:03: [io  0x0065-0x006f]
[    0.141707] pnp 00:03: [io  0x0074-0x007f]
[    0.141710] pnp 00:03: [io  0x0091-0x0093]
[    0.141713] pnp 00:03: [io  0x00a2-0x00bf]
[    0.141717] pnp 00:03: [io  0x00e0-0x00ef]
[    0.141720] pnp 00:03: [io  0x04d0-0x04d1]
[    0.141724] pnp 00:03: [io  0x0800-0x0805]
[    0.141727] pnp 00:03: [io  0x0290-0x0297]
[    0.141805] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.141810] system 00:03: [io  0x0800-0x0805] has been reserved
[    0.141814] system 00:03: [io  0x0290-0x0297] has been reserved
[    0.141819] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.141840] pnp 00:04: [dma 4]
[    0.141844] pnp 00:04: [io  0x0000-0x000f]
[    0.141847] pnp 00:04: [io  0x0080-0x0090]
[    0.141851] pnp 00:04: [io  0x0094-0x009f]
[    0.141854] pnp 00:04: [io  0x00c0-0x00df]
[    0.141910] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.141929] pnp 00:05: [io  0x0070-0x0073]
[    0.141949] pnp 00:05: [irq 8]
[    0.142003] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.142018] pnp 00:06: [io  0x0061]
[    0.142073] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.142089] pnp 00:07: [io  0x00f0-0x00ff]
[    0.142097] pnp 00:07: [irq 13]
[    0.142148] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.142368] pnp 00:08: [io  0x03f0-0x03f5]
[    0.142372] pnp 00:08: [io  0x03f7]
[    0.142381] pnp 00:08: [irq 6]
[    0.142384] pnp 00:08: [dma 2]
[    0.142458] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.142743] pnp 00:09: [io  0x03f8-0x03ff]
[    0.142752] pnp 00:09: [irq 4]
[    0.142865] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.143587] pnp 00:0a: [io  0x0378-0x037f]
[    0.143592] pnp 00:0a: [io  0x0778-0x077b]
[    0.143600] pnp 00:0a: [irq 7]
[    0.143603] pnp 00:0a: [dma 3]
[    0.143710] pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.143784] pnp 00:0b: [irq 12]
[    0.143844] pnp 00:0b: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.143885] pnp 00:0c: [io  0x0060]
[    0.143889] pnp 00:0c: [io  0x0064]
[    0.143897] pnp 00:0c: [irq 1]
[    0.143959] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.144026] pnp: PnP ACPI: found 13 devices
[    0.144030] ACPI: ACPI bus type pnp unregistered
[    0.144036] PnPBIOS: Disabled by ACPI PNP
[    0.182032] Switching to clocksource acpi_pm
[    0.182073] PCI: max bus depth: 1 pci_try_num: 2
[    0.182108] pci 0000:01:00.0: BAR 6: assigned [mem 0xe1000000-0xe101ffff pref]
[    0.182114] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.182122] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe1ffffff]
[    0.182128] pci 0000:00:01.0:   bridge window [mem 0xd8000000-0xdfffffff pref]
[    0.182145] pci 0000:00:01.0: setting latency timer to 64
[    0.182152] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.182157] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    0.182161] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xe1ffffff]
[    0.182165] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdfffffff pref]
[    0.182263] NET: Registered protocol family 2
[    0.182376] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.182952] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.183239] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.184320] TCP: Hash tables configured (established 131072 bind 65536)
[    0.184326] TCP reno registered
[    0.184334] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.184369] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.184550] NET: Registered protocol family 1
[    0.184576] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[    0.184873] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[    0.184901] pci 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[    0.184921] pci 0000:00:10.0: PCI INT A disabled
[    0.184936] pci 0000:00:10.1: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[    0.184953] pci 0000:00:10.1: PCI INT A disabled
[    0.184966] pci 0000:00:10.2: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[    0.184982] pci 0000:00:10.2: PCI INT B disabled
[    0.184994] pci 0000:00:10.3: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[    0.185010] pci 0000:00:10.3: PCI INT B disabled
[    0.185021] pci 0000:00:10.4: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[    0.185057] pci 0000:00:10.4: PCI INT C disabled
[    0.185065] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
[    0.185087] pci 0000:01:00.0: Boot video device
[    0.185091] PCI: CLS 32 bytes, default 32
[    0.185795] audit: initializing netlink socket (disabled)
[    0.185815] type=2000 audit(1343374765.180:1): initialized
[    0.216956] Trying to unpack rootfs image as initramfs...
[    0.268222] highmem bounce pool size: 64 pages
[    0.268235] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.300380] VFS: Disk quotas dquot_6.5.2
[    0.300491] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.308223] fuse init (API version 7.17)
[    0.308451] msgmni has been set to 1702
[    0.316662] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.320108] io scheduler noop registered
[    0.320116] io scheduler deadline registered
[    0.320161] io scheduler cfq registered (default)
[    0.320459] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.320522] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.320780] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.320791] ACPI: Power Button [PWRB]
[    0.320885] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.320890] ACPI: Power Button [PWRF]
[    0.320980] Marking TSC unstable due to TSC halts in idle
[    0.320991] ACPI: acpi_idle registered with cpuidle
[    0.323417] ERST: Table is not found!
[    0.323421] GHES: HEST is not enabled!
[    0.323688] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.344116] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.344162] isapnp: Scanning for PnP cards...
[    0.481294] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.500818] Linux agpgart interface v0.103
[    0.500936] agpgart: Detected VIA KM400/KM400A chipset
[    0.520410] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
[    0.523042] brd: module loaded
[    0.528861] loop: module loaded
[    0.529517] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 11, using IRQ 20
[    0.529522] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[    0.529551] pata_acpi 0000:00:0f.0: PCI INT B -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
[    0.529652] pata_acpi 0000:00:0f.0: PCI INT B disabled
[    0.529677] pata_acpi 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
[    0.529708] pata_acpi 0000:00:0f.1: PCI INT A disabled
[    0.530384] Fixed MDIO Bus: probed
[    0.530423] tun: Universal TUN/TAP device driver, 1.6
[    0.530426] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.530558] PPP generic driver version 2.4.2
[    0.530734] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.530760] ehci_hcd 0000:00:10.4: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[    0.530791] ehci_hcd 0000:00:10.4: EHCI Host Controller
[    0.530866] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[    0.530966] ehci_hcd 0000:00:10.4: irq 21, io mem 0xe2001000
[    0.579830] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[    0.664559] hub 1-0:1.0: USB hub found
[    0.664571] hub 1-0:1.0: 8 ports detected
[    0.664724] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.664757] uhci_hcd: USB Universal Host Controller Interface driver
[    0.664831] uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[    0.664850] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    0.664976] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    0.665012] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000b000
[    0.665261] hub 2-0:1.0: USB hub found
[    0.665269] hub 2-0:1.0: 2 ports detected
[    0.665397] uhci_hcd 0000:00:10.1: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[    0.665411] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    0.665486] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[    0.665512] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000b400
[    0.665726] hub 3-0:1.0: USB hub found
[    0.665733] hub 3-0:1.0: 2 ports detected
[    0.665833] uhci_hcd 0000:00:10.2: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[    0.665844] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    0.665910] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[    0.665935] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000b800
[    0.666162] hub 4-0:1.0: USB hub found
[    0.666168] hub 4-0:1.0: 2 ports detected
[    0.666262] uhci_hcd 0000:00:10.3: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[    0.666273] uhci_hcd 0000:00:10.3: UHCI Host Controller
[    0.666339] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[    0.666365] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000bc00
[    0.666580] hub 5-0:1.0: USB hub found
[    0.666587] hub 5-0:1.0: 2 ports detected
[    0.666788] usbcore: registered new interface driver libusual
[    0.666875] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.667459] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.667471] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.667704] mousedev: PS/2 mouse device common for all mice
[    0.667936] rtc_cmos 00:05: RTC can wake from S4
[    0.668189] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.668247] rtc0: alarms up to one year, y3k, 242 bytes nvram
[    0.668399] device-mapper: uevent: version 1.0.3
[    0.668542] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    0.668603] EISA: Probing bus 0 at eisa.0
[    0.668629] Cannot allocate resource for EISA slot 4
[    0.668633] Cannot allocate resource for EISA slot 5
[    0.668649] EISA: Detected 0 cards.
[    0.668665] cpufreq-nforce2: No nForce2 chipset.
[    0.668722] cpuidle: using governor ladder
[    0.668797] cpuidle: using governor menu
[    0.668801] EFI Variables Facility v0.08 2004-May-17
[    0.669147] TCP cubic registered
[    0.669412] NET: Registered protocol family 10
[    0.670247] NET: Registered protocol family 17
[    0.670255] Registering the dns_resolver key type
[    0.670311] Using IPI No-Shortcut mode
[    0.675496] PM: Hibernation image not present or could not be loaded.
[    0.675526] registered taskstats version 1
[    0.812363] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.951612] isapnp: No Plug & Play device found
[    1.060495] usb 1-4: new high-speed USB device number 2 using ehci_hcd
[    1.172736] Freeing initrd memory: 13816k freed
[    1.211479]   Magic number: 4:907:673
[    1.211677] rtc_cmos 00:05: setting system clock to 2012-07-27 07:39:26 UTC (1343374766)
[    1.211684] powernow-k8: Processor cpuid 681 not supported
[    1.211718] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.211720] EDD information not available.
[    1.212053] Freeing unused kernel memory: 712k freed
[    1.213244] Write protecting the kernel text: 5620k
[    1.213301] Write protecting the kernel read-only data: 2324k
[    1.223127] Initializing USB Mass Storage driver...
[    1.226526] scsi0 : usb-storage 1-4:1.0
[    1.226735] usbcore: registered new interface driver usb-storage
[    1.226739] USB Mass Storage support registered.
[    1.261957] udevd[85]: starting version 175
[    1.474397] Floppy drive(s): fd0 is 1.44M
[    1.500099] FDC 0 is a post-1991 82077
[    1.545622] pata_via 0000:00:0f.1: version 0.3.4
[    1.545657] pata_via 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
[    1.567388] scsi1 : pata_via
[    1.571314] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
[    1.571322] via_rhine: Broken BIOS detected, avoid_D3 enabled
[    1.571395] scsi2 : pata_via
[    1.573649] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xac00 irq 14
[    1.573655] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xac08 irq 15
[    1.593480] sata_via 0000:00:0f.0: version 2.6
[    1.593517] sata_via 0000:00:0f.0: PCI INT B -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
[    1.593598] sata_via 0000:00:0f.0: routed to hard irq line 11
[    1.597363] scsi3 : sata_via
[    1.600715] scsi4 : sata_via
[    1.600857] ata3: SATA max UDMA/133 cmd 0x9400 ctl 0x9800 bmdma 0xa400 irq 20
[    1.600862] ata4: SATA max UDMA/133 cmd 0x9c00 ctl 0xa000 bmdma 0xa408 irq 20
[    1.601282] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
[    1.601312] via-rhine 0000:00:12.0: PCI INT A -> Link[ALKD] -> GSI 23 (level, low) -> IRQ 23
[    1.616738] via-rhine 0000:00:12.0: eth0: VIA Rhine II at 0xe2002000, 00:40:ca:8a:85:58, IRQ 23
[    1.617456] via-rhine 0000:00:12.0: eth0: MII PHY found at address 1, status 0x7869 advertising 04a1 Link 45e1
[    1.621624] firewire_ohci 0000:00:07.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    1.684165] firewire_ohci: Added fw-ohci device 0000:00:07.0, OHCI v1.0, 4 IR + 8 IT contexts, quirks 0x11
[    1.736501] ata1.00: ATA-6: WDC WD800JB-00JJA0, 05.01C05, max UDMA/100
[    1.736509] ata1.00: 156301488 sectors, multi 16: LBA
[    1.744359] ata1.00: configured for UDMA/100
[    1.744592] scsi 1:0:0:0: Direct-Access     ATA      WDC WD800JB-00JJ 05.0 PQ: 0 ANSI: 5
[    1.745247] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    1.745721] sd 1:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.745812] sd 1:0:0:0: [sda] Write Protect is off
[    1.745817] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.745857] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.769061]  sda: sda1 sda2
[    1.769841] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.808040] ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    1.908385] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4163B, A100, max UDMA/33
[    1.924240] ata2.00: configured for UDMA/33
[    1.929983] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4163B A100 PQ: 0 ANSI: 5
[    1.935971] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.935977] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.936757] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    1.937133] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    2.140040] ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    2.184220] firewire_core: created device fw0: GUID 0040ca07010b4082, S400
[    2.224731] scsi 0:0:0:0: Direct-Access     WDC WD32 00BEVT-00ZCT0         PQ: 0 ANSI: 2 CCS
[    2.229233] sd 0:0:0:0: Attached scsi generic sg2 type 0
[    2.229701] sd 0:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    2.230198] sd 0:0:0:0: [sdb] Write Protect is off
[    2.230207] sd 0:0:0:0: [sdb] Mode Sense: 00 38 00 00
[    2.230702] sd 0:0:0:0: [sdb] Asking for cache data failed
[    2.230709] sd 0:0:0:0: [sdb] Assuming drive cache: write through
[    2.232576] sd 0:0:0:0: [sdb] Asking for cache data failed
[    2.232583] sd 0:0:0:0: [sdb] Assuming drive cache: write through
[    2.311694]  sdb: sdb1 sdb2 < sdb5 >
[    2.314056] sd 0:0:0:0: [sdb] Asking for cache data failed
[    2.314064] sd 0:0:0:0: [sdb] Assuming drive cache: write through
[    2.314070] sd 0:0:0:0: [sdb] Attached SCSI disk
[    2.767325] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[   16.367198] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.627628] udevd[315]: starting version 175
[   16.656703] Adding 1047548k swap on /dev/sdb5.  Priority:-1 extents:1 across:1047548k
[   16.726108] lp: driver loaded but no devices found
[   16.923201] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[   17.104238] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   17.239773] parport_pc 00:0a: reported by Plug and Play ACPI
[   17.239883] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   17.408682] lp0: using parport0 (interrupt-driven).
[   17.611140] Bluetooth: Core ver 2.16
[   17.611248] NET: Registered protocol family 31
[   17.611252] Bluetooth: HCI device and connection manager initialized
[   17.611258] Bluetooth: HCI socket layer initialized
[   17.611261] Bluetooth: L2CAP socket layer initialized
[   17.611276] Bluetooth: SCO socket layer initialized
[   17.648328] ppdev: user-space parallel port driver
[   17.656171] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.656178] Bluetooth: BNEP filters: protocol multicast
[   17.692829] Bluetooth: RFCOMM TTY layer initialized
[   17.692841] Bluetooth: RFCOMM socket layer initialized
[   17.692844] Bluetooth: RFCOMM ver 1.11
[   17.856082] type=1400 audit(1343367583.143:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=590 comm="apparmor_parser"
[   17.876465] type=1400 audit(1343367583.163:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=590 comm="apparmor_parser"
[   18.106703] type=1400 audit(1343367583.391:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=610 comm="apparmor_parser"
[   18.112843] type=1400 audit(1343367583.399:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=610 comm="apparmor_parser"
[   18.113273] type=1400 audit(1343367583.399:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=610 comm="apparmor_parser"
[   18.446544] psmouse serio1: hgpk: ID: 10 00 64
[   18.498555] nvidia: module license 'NVIDIA' taints kernel.
[   18.498564] Disabling lock debugging due to kernel taint
[   19.559662] NVRM: The NVIDIA GeForce FX 5200 GPU installed in this system is
[   19.559667] NVRM:  supported through the NVIDIA 173.14.xx Legacy drivers. Please
[   19.559669] NVRM:  visit http://www.nvidia.com/object/unix.html for more
[   19.559671] NVRM:  information.  The 295.40 NVIDIA driver will ignore
[   19.559673] NVRM:  this GPU.  Continuing probe...
[   19.559679] NVRM: No NVIDIA graphics adapter found!
[   19.867292] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
[   19.872207] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[   19.872221] snd_via82xx 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22
[   19.872369] snd_via82xx 0000:00:11.5: setting latency timer to 64
[   19.947901] init: failsafe main process (686) killed by TERM signal
[   20.190623] type=1400 audit(1343367585.475:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=785 comm="apparmor_parser"
[   20.211881] type=1400 audit(1343367585.495:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=786 comm="apparmor_parser"
[   20.213036] type=1400 audit(1343367585.499:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=786 comm="apparmor_parser"
[   20.213473] type=1400 audit(1343367585.499:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=786 comm="apparmor_parser"
[   20.293494] type=1400 audit(1343367585.579:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=790 comm="apparmor_parser"
[   20.985022] via-rhine 0000:00:12.0: eth0: link up, 100Mbps, half-duplex, lpa 0x45E1
[   21.766645] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[   21.766652] vesafb: scrolling: redraw
[   21.766658] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[   21.769251] vesafb: framebuffer at 0xd8000000, mapped to 0xf8600000, using 5120k, total 5120k
[   21.776838] Console: switching to colour frame buffer device 160x64
[   21.776908] fb0: VESA VGA frame buffer device
[   22.137215] init: gdm main process (1003) killed by TERM signal
[   23.938950] NVRM: The NVIDIA GeForce FX 5200 GPU installed in this system is
[   23.938956] NVRM:  supported through the NVIDIA 173.14.xx Legacy drivers. Please
[   23.938958] NVRM:  visit http://www.nvidia.com/object/unix.html for more
[   23.938960] NVRM:  information.  The 295.40 NVIDIA driver will ignore
[   23.938962] NVRM:  this GPU.  Continuing probe...
[   23.938972] NVRM: No NVIDIA graphics adapter found!
[   32.144023] eth0: no IPv6 routers present
[  519.148768] audit_printk_skb: 42 callbacks suppressed
[  519.148775] type=1400 audit(1343368084.435:26): apparmor="DENIED" operation="capable" parent=1 profile="/usr/lib/telepathy/mission-control-5" pid=2130 comm="mission-control" capability=23  capname="sys_nice"
[  521.387187] type=1400 audit(1343368086.671:27): apparmor="DENIED" operation="file_mmap" parent=2179 profile="/usr/lib/telepathy/telepathy-*" name="/usr/lib/libpurple.so.0.10.3" pid=2180 comm="telepathy-haze" requested_mask="m" denied_mask="m" fsuid=0 ouid=0
[  521.398039] type=1400 audit(1343368086.683:28): apparmor="DENIED" operation="file_mmap" parent=2181 profile="/usr/lib/telepathy/telepathy-*" name="/usr/lib/libpurple.so.0.10.3" pid=2182 comm="telepathy-haze" requested_mask="m" denied_mask="m" fsuid=0 ouid=0
[ 1710.167683] type=1400 audit(1343369275.448:29): apparmor="DENIED" operation="file_mmap" parent=2400 profile="/usr/lib/telepathy/telepathy-*" name="/usr/lib/libpurple.so.0.10.3" pid=2401 comm="telepathy-haze" requested_mask="m" denied_mask="m" fsuid=0 ouid=0
[ 1710.179262] type=1400 audit(1343369275.460:30): apparmor="DENIED" operation="file_mmap" parent=2402 profile="/usr/lib/telepathy/telepathy-*" name="/usr/lib/libpurple.so.0.10.3" pid=2403 comm="telepathy-haze" requested_mask="m" denied_mask="m" fsuid=0 ouid=0
[ 2410.059197] type=1400 audit(1343369975.344:31): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=3964 comm="apparmor_parser"
[ 2410.059606] type=1400 audit(1343369975.344:32): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=3964 comm="apparmor_parser"
[ 2410.059838] type=1400 audit(1343369975.344:33): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=3964 comm="apparmor_parser"
[ 2825.193070] type=1400 audit(1343370390.478:34): apparmor="DENIED" operation="file_mmap" parent=4186 profile="/usr/lib/telepathy/telepathy-*" name="/usr/lib/libpurple.so.0.10.3" pid=4187 comm="telepathy-haze" requested_mask="m" denied_mask="m" fsuid=0 ouid=0
[ 2825.198344] type=1400 audit(1343370390.482:35): apparmor="DENIED" operation="file_mmap" parent=4188 profile="/usr/lib/telepathy/telepathy-*" name="/usr/lib/libpurple.so.0.10.3" pid=4189 comm="telepathy-haze" requested_mask="m" denied_mask="m" fsuid=0 ouid=0
rimidalv@rimidalv-Product-Name:~$

EDIT: Vkládejte prosím výpisy do code... díky.
« Poslední změna: 27 Července 2012, 11:03:09 od Tadeáš Pařík »

Rover623

Re:ICQ v Empathy neodešle zprávu
« Odpověď #7 kdy: 27 Července 2012, 15:51:38 »
V kostce, asi tolik, přístup k serveru odepřen. To může mít několik důvodů, špatně nastavené Empathy, špatně nakonfigurovaný router, špatně vytvořený profil (smazat a udělat nový), ICQ zase změnilo protokol (zkusit Pidgin), tvůj nick se dostal na blacklist a byl ze strany ICQ zablokován

rimidalv

  • Aktivní člen
  • *
  • Příspěvků: 317
Re:ICQ v Empathy neodešle zprávu
« Odpověď #8 kdy: 27 Července 2012, 21:50:17 »
V Pidginu ICQ jde, zkusil jsem ještě přeinstalovat  Empathy, ale stále se nic nezměnilo.

Rover623

Re:ICQ v Empathy neodešle zprávu
« Odpověď #9 kdy: 27 Července 2012, 21:54:43 »
Pak je problém se zastaralým protokolem pro ICQ v Empathy, ono obecně Empathy má s ICQ dlouhodobě problémy

 

Provoz zaštiťuje spolek OpenAlt.